On December 1st, the Repair Course for Small Laboratory Equipment, taught by our engineers at the EDIBON facilities, was completed, lasting 4 days.
The attendees, (Laboratory technicians and maintenance of the Rey Juan Carlos University of Madrid) had the opportunity to perform multiple...
AEL-WPPIC Aplicação de Plantas de Energia Eólica com Gerador de Indução, Controlada por Computador (PC)
2.4.3.- ELETRÔNICA DE POTÊNCIA
5.3.3.- ENERGIA EÓLICA
6.1.2.2.- ELETRÔNICA DE POTÊNCIA E ELETRÔNICA INDUSTRIAL
SISTEMAS INOVADORES
The Computer Controlled Wind Power Plants Application with Induction Generator, "AEL-WPPIC", has been developed by EDIBON to study of the main characteristics and behavior of the induction generators used in wind turbines which inject the generated power into the grid.
NOTÍCIAS RELACIONADAS
Descrição Geral
The Computer Controlled Wind Power Plants Application with Induction Generator, "AEL-WPPIC", has been designed by EDIBON to study of the main characteristics and behavior of the induction generators used in wind turbines which inject the generated power into the grid.
The "AEL-WPPIC" application allows the user to become familiar with the electrical scheme and the operating characteristics of wind turbines which use squirrel cage rotor three-phase generators in wind power plants connected to the main grid. For this, the application includes a squirrel cage induction generator coupled to a three-phase motor (turbine), whose speed is controlled through a variable frequency drive. This application allows simulating different wind conditions and the drive train of a wind turbine. It also includes a module with a turbine controller for the automatic control of the turbine-generator group electrical parameters and speed, as well as for the carrying out the automatic synchronization process of the three-phase induction generator with the grid. This control module is at the same time an advanced protection for generators and turbines. It meets the ANSI standards regarding the protection parameters for generators and turbines (ANSI 81O, ANSI 81U, ANSI 59, ANSI 27, ANSI 50/51, ANSI 32R/F, ANSI IOP 32, ANSI MOP 32, ANSI 46, voltage asymmetry, generator ground fault, phase rotation, generator lagging power factor, among others). In addition, it is included a three-phase capacitors bank which will generate the required reactive energy so that the induction generator do not consume it from the grid and a network analyzer to monitor the generation electrical parameters.
On the other hand, the essential part of this application is the wind power plant simulation software, "PSV-WPPP-SOF". This tool allows the user to carry out remotely the control and automatic synchronization maneuvers with the turbine-generator group and at the same time to monitor every curves of the generator electrical parameters, the energy losses and voltage drops. In addition, it allows saving all the acquired data to watch and compare it later. It is possible to see clearly and with accuracy the effects of reactive power compensation on the monitored power curves, maximum and minimum energy demand, load unbalances and the variation of the power factor. In addition, the "PSV-WPPP-SOF" software, allows carrying out the simulation of pre-configured wind curves for a real time or later analysis of the induction generator response. In this way, the user will be able to obtain and analyze the speed and power curves of the simulated wind turbine regarding the pre-configured values, for an in-depth study of this type of wind power plants.
To acquire more experience in the study of wind turbines with three-phase squirrel cage generators, it is recommended to acquire the modules of resistors and inductances oriented to the study of the island operation of the three-phase induction generator and the manual compensation of the reactive power consumed by it. In addition, the analog instrumentation module for the measurement of the most relevant electrical parameters of the generator (P, Q, V, f) is also recommended.
EXERCÍCIOS E PRÁTICAS GUIADAS
EXERCÍCIOS PRÁTICOS GUIADOS INCLUÍDOS NO MANUAL
- Startup of the induction generator.
- Automatic speed control of the turbine-generator group speed.
- Automatic synchronization of the three-phase induction generator with the grid.
- Monitoring the three-phase induction generator electrical parameters with the grid (P, Q, S, PF).
- Control of the active power injected into the grid.
- Compensation of the reactive power by means of capacitor banks.
- Remote automatic control of the turbine-generator group.
- Real time monitoring of current and voltage values and waveforms.
- Real time monitoring of the active, reactive and apparent powers.
- Visualization of the curves for the measured values as a function of time.
- Visualization of the phasor diagrams of the generator electrical parameters.
- Customized setting of the wind speed curves.
- Visualization of the power curve for the pre-configured wind speed values.
- Real time monitoring of the obtained results.
- Storage and comparison of the obtained results.
- Stand-alone of the three-phase induction generator.
- Study of the generation and demand in isolated systems.
- Measurement of the electrical parameters of the generator (P, Q, V, f) by analog instrumentation.
EXERCÍCIOS MAIS PRÁTICOS A SEREM FEITOS COM A UNIDADE
- Many students view results simultaneously. To view all results in real time in the classroom by means of a projector or an electronic whiteboard.
- Open Control, Multicontrol and Real Time Control. This unit allows intrinsically and/or extrinsically to change the span, gains, proportional, integral, derivative parameters, etc, in real time.
- The Computer Control System with SCADA allows a real industrial simulation.
- This unit is totally safe as uses mechanical, electrical/electronic, and software safety devices.
- This unit can be used for doing applied research.
- This unit can be used for giving training courses to Industries even to other Technical Education Institutions.
- Visualization of all the sensors values used in the AEL-WPPIC unit process.
- Several other exercises can be done and designed by the user
EQUIPAMENTOS SIMILARES DISPONÍVEIS
5.3.3.- ENERGIA EÓLICA
EEE
The Wind Energy Unit, "EEE", contains an aerogenerator, in laboratory-scale, and is used to study the conversion of kinetic wind energy into electrical energy and to study the influence of some factors on this generation.The unit consists of a...
5.3.3.- ENERGIA EÓLICA
EEEC
Equipamento de Energia Eólica, Controlado por Computador (PC)
The Computer Controlled Wind Energy Unit, "EEEC", contains an aerogenerator, in laboratory-scale, and is used to study the conversion of kinetic wind energy into electrical energy and to study the influence of some factors on this generation.The...
5.3.1.- ENERGIA SOLAR FOTOVOLTAICA
EESFC
Equipamento de Energia Solar Fotovoltaica, Controlado por Computador (PC)
The Computer Controlled Photovoltaic Solar Energy Unit, "EESFC", includes equipment that uses the photo-conversion law for the direct conversion of solar radiation into electricity. The absorbed energy is provided by simulated solar radiation,...
5.3.3.- ENERGIA EÓLICA
MINI-EEEC
Equipamento Básico de Energia Eólica, Controlado por Computador (PC)
The Computer Controlled Wind Energy Basic Unit, "MINI-EEEC", is a small-scale unit designed to study wind energy and the influence of some factors on its generation.This unit consists of a transparent tunnel, a wind turbine with rotor to place up...
5.3.3.- ENERGIA EÓLICA
MINI-EEE
Equipamento básico de Energia Eólica.
The Wind Energy Basic Unit, "MINI-EEE", is a small-scale unit designed to study wind energy and the influence of some factors on its generation.This unit consists of a transparent tunnel, a wind turbine with rotor to place up to six blades and a...
5.3.3.- ENERGIA EÓLICA
AEL-WPT
Aplicação de Energia Eólica com Gerador Síncrono de Ímãs Permanentes
Considering the above, this application allows experimental investigation on the conversion of wind energy into electricity by means of a wind power generator. The system configuration is stand-alone (isolated from the grid). The equipment is...
5.3.3.- ENERGIA EÓLICA
AEL-WPPI
Aplicação de Centrais Eólicas com Gerador de Indução
The Wind Power Plants with Induction Generator Application, "AEL-WPPI", has been developed by EDIBON to study the wind turbines electrical performance with three-phase induction generators of squirrel cage that inject power in the network.Wind...
5.3.3.- ENERGIA EÓLICA
AEL-WPTC
Aplicação de Energia Eólica com Gerador Síncrono de Imãs Permanentes, com SCADA
The Wind Power Application with Permanent Magnets Synchronous Generator, with SCADA, "AEL-WPTC", has been designed to study the conversion of wind energy into electricity by means of a permanent magnet synchronous generator. This application...
EQUIPAMENTOS COMPLEMENTARES
5.3.3.- ENERGIA EÓLICA
AEL-WPP
Wind Power Plants with Double Feed Induction Generator Application
The Wind Power Plants with Double Feed Induction Generator Application, "AEL-WPP", is used to investigate the design and operation of modern wind power stations. The "AEL-WPP" consists of a prime motor that moves a double-feed induction generator...
5.3.3.- ENERGIA EÓLICA
AEL-WPT
Aplicação de Energia Eólica com Gerador Síncrono de Ímãs Permanentes
Considering the above, this application allows experimental investigation on the conversion of wind energy into electricity by means of a wind power generator. The system configuration is stand-alone (isolated from the grid). The equipment is...
5.3.3.- ENERGIA EÓLICA
AEL-WPTC
Aplicação de Energia Eólica com Gerador Síncrono de Imãs Permanentes, com SCADA
The Wind Power Application with Permanent Magnets Synchronous Generator, with SCADA, "AEL-WPTC", has been designed to study the conversion of wind energy into electricity by means of a permanent magnet synchronous generator. This application...
5.3.3.- ENERGIA EÓLICA
AEL-WPPI
Aplicação de Centrais Eólicas com Gerador de Indução
The Wind Power Plants with Induction Generator Application, "AEL-WPPI", has been developed by EDIBON to study the wind turbines electrical performance with three-phase induction generators of squirrel cage that inject power in the network.Wind...
5.3.3.- ENERGIA EÓLICA
AEL-SWT
Aplicação de Turbina Eólica em Redes Isoladas
The Stand-Alone Wind Turbine Aplication, "AEL-SWT", has been designed by Edibon for the training at both the theoretical and practicallevels in the field of wind turbines.The "AEL-SWT" application provides several levels of training to give the...
5.3.3.- ENERGIA EÓLICA
SWPC
Aplicação de Bombeamento para Redes Isoladas, Controlada por Computador (PC)
The Computer Controlled Single Water Pumping Application, "SWPC", has been designed by Edibon to show the user the basic principles of operation of pumping equipment in isolated networks, exposing in a didactic way the elements involved in the...
5.3.3.- ENERGIA EÓLICA
SWP
Stand-alone Water Pumping Application
The Water Pumping Application, "SWP", has been designed by Edibon to show the user the basic principles of operation of pumping equipment in isolated networks, exposing in a didactic way the elements involved in the process of generation and...
5.3.3.- ENERGIA EÓLICA
EEEC
Equipamento de Energia Eólica, Controlado por Computador (PC)
The Computer Controlled Wind Energy Unit, "EEEC", contains an aerogenerator, in laboratory-scale, and is used to study the conversion of kinetic wind energy into electrical energy and to study the influence of some factors on this generation.The...
5.3.3.- ENERGIA EÓLICA
EEE
Equipamento de Energia Eólica.
The Wind Energy Unit, "EEE", contains an aerogenerator, in laboratory-scale, and is used to study the conversion of kinetic wind energy into electrical energy and to study the influence of some factors on this generation.The unit consists of a...
5.3.3.- ENERGIA EÓLICA
MINI-EEEC
Equipamento Básico de Energia Eólica, Controlado por Computador (PC)
The Computer Controlled Wind Energy Basic Unit, "MINI-EEEC", is a small-scale unit designed to study wind energy and the influence of some factors on its generation.This unit consists of a transparent tunnel, a wind turbine with rotor to place up...
5.3.3.- ENERGIA EÓLICA
MINI-EEE
Equipamento básico de Energia Eólica.
The Wind Energy Basic Unit, "MINI-EEE", is a small-scale unit designed to study wind energy and the influence of some factors on its generation.This unit consists of a transparent tunnel, a wind turbine with rotor to place up to six blades and a...
5.3.3.- ENERGIA EÓLICA
WEDTA
Equipamento de Análise da Transmissão de Energia Eólica
The Wind Energy Drive Train Analysis Unit, "WEDTA", designed by EDIBON, allows students and professors to explore the operational characteristics of a wind turbine rotor under various wind conditions, thus optimizing the design and operation of...