14.2.- ELETRÔNICA BIOMÉDICA

Engenharia Biomédica estuda a aplicação dos conhecimentos de engenharia no campo da biologia e da medicina. Uma das áreas mais relevantes desta engenharia é a Biomedical Electronics, na qual os conceitos de electrónica são aplicados para o desenvolvimento de instrumentação médica.

Ver mais

Agora, muitos dos processos desenvolvidos na medicina precisam do apoio de Engenharia Electrónica para resolver certas necessidades. Desde a combinação de elementos electrónicos básicos, tais como resistores, bobinas e capacitores, até circuitos mais complexos para condicionamento de sinal, conversão analógica para digital (A/D) ou emissão de uma onda electromagnética permitem a concepção de dispositivos capazes de adquirir informações do organismo ou de aplicar um tratamento médico. Além disso, controlo electrónico técnicas, tais como PID controladores ou redes neurais, permitem desenvolver instrumentação médica e equipamentos capazes de fornecer substâncias numa base controlada ou de equilibrar uma reacção química (estequiometria) num laboratório. Outros elementos, tais como cristal líquido displays (LCD) ou monitor de LED, oferecem um consumo de energia muito baixo, o que os torna ideais para utilização em dispositivos médicos transportáveis. A combinação de conhecimentos de controlo e isto instrumentação electrónica clínica é necessária para interpretar e conceber os circuitos electrónicos de dispositivos médicos.

O futuro da Eletrônica Biomédica procura lançar as bases para a medicina do futuro, na qual os dispositivos electrónicos são capazes de diagnosticar rapidamente um paciente e aplicar terapias não-invasivas tão eficientemente quanto possível. Além disso, os componentes electrónicos serão cada vez mais pequenos e serão desenvolvidos novos materiais, facilitando a concepção de nano-robôs. Esta tecnologia será capaz de diagnosticar e tratar a nível celular, e até reproduzir e reparar DNA de uma forma artificial e autónoma.

Ver produtos

EQUIPAMENTO DE ELETRÔNICA BIOMÉDICA

Mostrando 1-30 de um total de 60 produto(s)

BASIC ELECTRONICS AND ELECTRICITY LABORATORY: - LIEBA

LIEBA

Available

14.2.1.6.- ELETRÔNICA DE POTÊNCIA

LIEBA

Laboratório de Eletrônica e Eletricidade Básica

We present a flexible and modular-based system for learning basic electronics, basic electricity and circuit theory. The advantage given by this learning and teaching system is that the student establishes his own rhythm, thus rendering...

DIRECT CURRENT (DC) CIRCUITS MODULE - N-M1

N-M1

Available

14.2.1.1.- CONCEITOS BÁSICOS DE LEIS ELÉTRICAS

N-M1

Módulo de Circuitos em Corrente Contínua (CC)

For the correct understanding of electronics it is necessary to know some fundamental laws and theorems such as Ohm’s Law, Kirchhoff’s Laws and other simple theorems of initiation to D.C. circuits.With Direct Current (D.C.) Circuits Module,...

ALTERNATING CURRENT (AC) CIRCUITS MODULE - N-M2

N-M2

Available

14.2.1.1.- CONCEITOS BÁSICOS DE LEIS ELÉTRICAS

N-M2

Módulo de Circuitos em Corrente Alternada (CA)

In contrast to DC, which always has the same direction and sense, in AC the flow of electrons changes direction periodically with a frequency of 50 or 60 Hz (depending on the country).With Alternating Current (AC) Circuits Module, "N-M2", designed...

N-M16

Available

14.2.1.1.- CONCEITOS BÁSICOS DE LEIS ELÉTRICAS

N-M16

Módulo de Redes Elétricas

After studying the basic knowledge of electrical networks, we must understand and investigate the dependence between current and voltage applied to different electrical devices.With the Electric Networks Module, "N-M16", designed by EDIBON, it is...

N-M17

Available

14.2.1.1.- CONCEITOS BÁSICOS DE LEIS ELÉTRICAS

N-M17

Módulo de Eletromagnetismo

Electromagnetism is the interaction between electric charges. It is described in terms of charges interacting between of electric and magnetic fields.With the Electromagnetism Module, "N-M17", designed by EDIBON, the operation of electromagnetic...

N-M18

Available

14.2.1.1.- CONCEITOS BÁSICOS DE LEIS ELÉTRICAS

N-M18

Módulo de Circuitos Trifásicos

Three-phase voltage is essentially a system of three alternating voltages, coupled (all 3 are produced simultaneously in a generator) and 120º out of phase with each other (i.e. one third of the period).The Three-phase Circuits Module, "N-M18",...

N-M6

Available

14.2.1.2.- ELETRÔNICA ANALÓGICA

N-M6

Módulo de Osciladores

Oscillators operation is usually very similar in all of them: the oscillating circuit produces an oscillation, then the amplifier increases it and finally the feedback network takes a part of the energy from the oscillating circuit and introduces...

N-M7

Available

14.2.1.2.- ELETRÔNICA ANALÓGICA

N-M7

Módulo de Amplificadores Operacionais

Operational amplifiers are compact, active, linear and high-gain devices designed to provide the desired transfer function. An operational amplifier consists of an electronic circuit having two inputs and one output. The output is the difference...

N-M8

Available

14.2.1.2.- ELETRÔNICA ANALÓGICA

N-M8

Módulo de Filtros

An electronic filter is an element that allows electrical signals to pass through it, at a specific frequency or frequency ranges while preventing the passage of others, being able to modify both, their amplitude and phase. It is a device that...

ANALOG/DIGITAL CONVERTERS MODULE - N-M60

N-M60

Available

2.3.3.- ELETRÔNICA DIGITAL

N-M60

Módulo de Conversores Analógico/Digital

Most of the "information" generated in the world by various physical phenomena has a strong analogical character. This means that the information undergoes a continuous variation within certain limits determined over time. Of course, there is also...

DIGITAL/ANALOG CONVERTERS MODULE - N-M61

N-M61

Available

2.3.3.- ELETRÔNICA DIGITAL

N-M61

Módulo de Conversores Digital/Analógico

Digital/analog conversion happens when you want to recover or re-obtain a digital signal that has been processed and we want to regenerate it. A signal that has been sampled, for example, a temperature signal and we need to return it to the...

DIGITAL SYSTEMS & CONVERTERS MODULE - N-M10

N-M10

Available

14.2.1.3.- ELETRÔNICA DIGITAL

N-M10

Módulo de Sistemas Digitais e Conversores

Generally, an analog to digital converter is an electronic device that converts an analog voltage input to a digital number.digital number. The digital output can use different coding schemes, such as binary, although some non-electrical or...

DIGITAL ELECTRONICS FUNDAMENTALS MODULE - N-M11

N-M11

Available

14.2.1.3.- ELETRÔNICA DIGITAL

N-M11

Módulo de Fundamentos de Eletrônica Digital

Digital systems are systems for processing, treatment or transmission of information, in which such information is limited to take values in a discrete set. These signals (whose magnitude can only take one value from a discrete set of values) are...

BASIC COMBINATIONAL CIRCUITS MODULE - N-M12

N-M12

Available

14.2.1.3.- ELETRÔNICA DIGITAL

N-M12

Módulo de Circuitos Combinacionais Básicos

A combinational circuit is an electronic circuit in which the value of its outputs at a given instant, depends on the value of the inputs at the same instant. In other words, it is a circuit that has no memory. Combinational circuits work with...

BASIC SEQUENTIAL CIRCUITS MODULE - N-M13

N-M13

Available

14.2.1.3.- ELETRÔNICA DIGITAL

N-M13

Módulo de Circuitos Sequenciais Básicos

Logic gates and the circuits created with them constitute combinational logic, so called because the output only depends on the combination of the input variables present.There is a second group of logic circuits called sequential logic, so called...

N-M3

Available

14.2.1.4.- SEMICONDUTORES

N-M3

Módulo de Semicondutores I

Semiconductors are materials characterized by a resistivity lower than an insulator and higher than a conductor. There are different types of semiconductors, among which we could highlight diodes as extrinsic semiconductors (formed by more than...

N-M4

Available

14.2.1.4.- SEMICONDUTORES

N-M4

Módulo de Semicondutores II

To improve and extend the characteristics of the input signals, it is possible to use two or more transistors. Thus, you may want to build an amplifier in which you want to increase the input impedance without decreasing the gain. The solution to...

N-M14

Available

14.2.1.4.- SEMICONDUTORES

N-M14

Módulo de Optoeletrônica

Optoelectronics is the link between optical systems and electronic systems. Optoelectronic components are those whose operation is directly related to light.They are semiconductor devices capable of producing light radiation within the human...

Available

14.2.1.5.- INSTRUMENTATION AND CONTROL

M44

Aplicações de Luz

This unit allows different practices related to the measurement of light intensity to be carried out. Photodiodes are semiconductor light sensors that generate a current or voltage when the P-N junction in the semiconductor is illuminated with...

Available

14.2.1.5.- INSTRUMENTATION AND CONTROL

M45

Posição Linear e Força

Linear Variable Displacement Transducers (LVDT) provide a certain amount of voltage output relative to the parameters being measured, for example force, for signal conditioning.With Linear Position and Force Unit, "M45", designed by EDIBON, it is...

Available

14.2.1.5.- INSTRUMENTATION AND CONTROL

M46

Medidas Meio Ambientais

Environmental measurement is a data collection process. In other words, it is a continuous and systematic follow-up study of environmental variables (air quality and speed, humidity, pressure, etc.). The aim is to identify and evaluate...

ROTATIONAL SPEED & POSITION CONTROL - M47

Available

14.2.1.5.- INSTRUMENTATION AND CONTROL

M47

Velocidade Rotacional e Controle de Posição

The unit is equipped with a DC motor whose rotation speed can be controlled by the supply voltage. The following sensors are arranged along the motor shaft: optical slot sensor, inductive sensor, infrared reflection sensor, Hall effect sensor,...

Available

14.2.1.5.- INSTRUMENTATION AND CONTROL

M48

Medições Sonoras

With the Sound Measurement Unit, "M48", designed by EDIBON, different practices related to sound measurements can be carried out. The unit has three different types of components: two types of microphones and a loudspeaker.

APPLICATIONS OF TEMPERATURE AND PRESSURE MODULE - N-M49

N-M49

Available

2.3.5.- INSTRUMENTAÇÃO E CONTROLE

N-M49

Módulo de Aplicações de Temperatura e Pressão

A transducer is a device that is capable of transforming or converting a certain type of input energy into a different one at the output. Depending on the application they have, the name itself will indicate the type of conversion it performs, for...

N-M9

Available

14.2.1.6.- ELETRÔNICA DE POTÊNCIA

N-M9

Módulo de Eletrônica de Potência

Semiconductors used in power electronics operate as switches and therefore it is interesting to know the conduction characteristics, switching and control methods.With Power Electronics Module, "N-M9", designed by EDIBON, the operation of MOSFET...

N-M5

Available

14.2.1.6.- ELETRÔNICA DE POTÊNCIA

N-M5

Módulo de Fontes de Alimentação

With the Power Supplies Module "N-M5", designed by EDIBON, symmetrical voltage regulators, operation of fixed, symmetrical and switched-mode power supplies as well as rectification (conversion of an AC voltage to a DC voltage) can be studied.In...

COMPUTER CONTROLLED A/D AND D/A CONVERTERS UNIT - CADDA

CADDA

Available

14.2.1.3.- ELETRÔNICA DIGITAL

CADDA

Equipamento de Conversores A/D e D/A, Controlado por Computador (PC)

The Computer Controlled A/D and D/A Converters Unit, "CADDA", unit has been designed to help the students to learn how to perform the most common procedures and study the different circuits used to convert analog signals in a digital signals and...

COMPUTER CONTROLLED TEACHING UNIT FOR THE STUDY OF DIGITAL SIGNAL PROCESSING - TDS

Available

14.2.1.3.- ELETRÔNICA DIGITAL

TDS

Equipamento para Estudo do Tratamento Digital do Sinal, Controlado por Computador (PC)

The Teaching Unit for the Study of Digital Signal Processing "TDS" allows to study the principles and more important concepts about digital signal processing, including study and practical exercises, among others, of:Continuous waveforms...

WEIGHING SYSTEM, WITH COMPUTER DATA ACQUISITION - SPC

Available

14.2.2.- INSTRUMENTAÇÃO E CONTROLE

SPC

Sistema de Pesagem com Aquisição de Dados por Computador (PC)

The Weighing System, with Computer Data Acquisition "SPC" consist of a digital force meter that allows to determine both the mass and weight of a body (traction) as well as to determine compression forces.It has different adaptors according to the...

PRESSURE SENSORS CALIBRATION SYSTEM - SCSP

SCSP

Available

14.2.2.- INSTRUMENTAÇÃO E CONTROLE

SCSP

Sistema de Calibração de Sensores de Pressão

The Pressure Sensors Calibration System, "SCSP", is mainly composed of two pressure manometers on one hand, one measuring up to 1000 millimeters of water or 100 millibars and the other one measuring up to 2.5 bars and on the other hand, two vacuum...

PARA MAIS INFORMAÇÕES, CONTACTE-NOS