7.3.2.- ENSAIOS DE MATERIAIS

ENSAIOS DE MATERIAIS UNITS

1.- FÍSICA 2.- ELETRÔNICA 3.- COMUNICAÇÕES 4.- ELETRICIDADE 5.- ENERGIA 6.- MECATRÔNICA E AUTOMAÇÃO 7.- MECÂNICA 8.- MECÂNICA DE FLUIDOS 9.- TERMODINÂMICA E TERMOTÉCNICA 10.- CONTROLE DE PROCESSOS 11.- ENGENHARIA QUÍMICA 12.- TECNOLOGIA DE ALIMENTOS E ÁGUAS 13.- MEIO AMBIENTE 14.- ENGENHARIA BIOMÉDICA ACESSÓRIOS DE LABORATÓRIO PLANTAS PILOTO PERSONALIZADAS
7.1.- ENGENHARIA MECÂNICA 7.2.- ENGENHARIA MECÂNICA AUTOMOTIVA 7.3.- ENGENHARIA DE MATERIAIS 7.4.- INSTALAÇÕES E MANUTENÇÃO
7.3.1.- FOTOELASTICIDADE E EXTENSOMETRIA 7.3.2.- ENSAIOS DE MATERIAIS 7.3.3.- TÉCNICAS DE FABRICACÃO E MANUTENÇÃO
7.3.2.1.- ENSAIOS MECÂNICOS 7.3.2.2.- ENSAIOS ACÚSTICOS E TÉRMICOS
Mostrando 1-20 de um total de 20 produto(s)
12 24 36
UNIVERSAL MATERIAL TESTING UNIT - EEU/20KN
  • EEU/20KN
Available
7.3.2.1.- ENSAIOS MECÂNICOS

EEU/20KN

Equipamento de Ensaio de Materiais Universal

The Universal Material Testing Unit, "EEU/20KN", is a didactic bench-top universal material testing unit. It is distinguished by its rigid construction, accurate control and a precise hydraulic system to apply loads of up to 20 kN, which enables...
Ver Equipamento
BRINELL HARDNESS TESTING UNIT - EEDB
  • EEDB
Available
7.3.2.1.- ENSAIOS MECÂNICOS

EEDB

Equipamento de Ensaio de Dureza "Brinell"

The Brinell Hardness Testing Unit, "EEDB", is a hardness tester that determines Brinell hardness in metals, hard alloys, tempered steels, etc. Besides, it can be used with other materials, such as rigid plastics, bakelite, etc.A penetrating ball...
Ver Equipamento
CREEP TESTING UNIT - EEFCR
  • EEFCR
Available
7.3.2.1.- ENSAIOS MECÂNICOS

EEFCR

Equipamento de Ensaio de Fluência "Creep"

The Creep Testing Unit, "EEFCR", for the creep testing is mounted on a structure of aluminum profiles which a painted steel panel is supported on.The "EEFCR" unit is designed to carry out experiments on specimens of plastic materials. Due to the...
Ver Equipamento
FATIGUE TESTING UNIT - EEF
  • EEF
Available
7.3.2.1.- ENSAIOS MECÂNICOS

EEF

Equipamento de Ensaio de Fadiga

The Fatigue Testing Unit, "EEF", designed by EDIBON, allows to study the fatigue strength of the materials. For that purpose, fatigue tests are performed with different materials and notches.Optionally, with the additional recommended element Set...
Ver Equipamento
CHARPY AND IZOD IMPACT TESTING UNIT - EEICI
  • EEICI
Available
7.3.2.1.- ENSAIOS MECÂNICOS

EEICI

Equipamento de Ensaio de Impacto Charpy e Izod

The Charpy and Izod Impact Testing Unit, "EEICI", consists of a pendulum supported on bearings with an arm of 330 mm long and a fastening system in the initial position of the test. The suitable hammer either for Charpy or Izod test is screwed to...
Ver Equipamento
UNIVERSAL BUCKLING UNIT - MUP
  • MUP
Available
7.3.2.1.- ENSAIOS MECÂNICOS

MUP

Equipamento Universal de Flambagem

The Universal Buckling Unit "MUP" is a bench-top unit whose frame is made of anodized aluminum profiles and plates and steel elements, on which a bubble level is installed to equilibrate the system.The unit has been designed to carry out tests...
Ver Equipamento
STRUT BUCKLING UNIT - MFLT
  • MFLT
Available
7.3.2.1.- ENSAIOS MECÂNICOS

MFLT

Equipamento de Flambagem em Barras

The Strut Buckling Unit "MFLT" allows the student to obtain experimentally the buckling critical load of slender struts subjected to compression.The unit allows to study the buckling of pieces of different lengths, ranging from 300 mm. to 625 mm.,...
Ver Equipamento
EULER BUCKLING MODES UNIT - MEBM
  • MEBM
Available
7.3.2.1.- ENSAIOS MECÂNICOS

MEBM

Equipamento de Modos de Flambagem de Euler

With the Euler Buckling Modes Unit, "MEBM", the four Euler buckling cases are demonstrated, for which four elastic bars are fixed or supported in a frame and subjected to compression load with a system of weights.The elastic bars can be free or...
Ver Equipamento
TORSION AND BEND UNIT - MTP
  • MTP
Available
7.3.2.1.- ENSAIOS MECÂNICOS

MTP

Equipamento de Torção e Flexão

The Torsion and Bend Unit, "MTP", is a combined apparatus for the demonstration of both torsion and bend to be used in the laboratory or as a complement of the theoretical study about torsion and bend. Its size and weight facilitate its transport...
Ver Equipamento
TORSION UNIT - MTB
  • MTB
Available
7.3.2.1.- ENSAIOS MECÂNICOS

MTB

Equipamento de Torção

The Torsion Unit, "MTB", allows to verify the basis of torsion and to perform practical exercises to demonstrate:Circular rods elastic torsion equation.The rigidity modulus of different materials.To perform the tests a metallic rod is fastened by...
Ver Equipamento
TORSION TEST UNIT (30NM) - MTT
  • MTT
Available
7.3.2.1.- ENSAIOS MECÂNICOS

MTT

Equipamento de Teste de Torção (30Nm)

To perform the tests, the test specimen is clamped and twisted by means of a flywheel and a worm gear until it breaks. The force is gradually applied to the specimen to observe the elastic strain produced. The specimen will deform and manifest...
Ver Equipamento
TENSILE TESTER UNIT - MTTU
  • MTTU
Available
7.3.2.1.- ENSAIOS MECÂNICOS

MTTU

Equipamento de Ensaio de Tração

With the Tensile Tester Unit, "MTTU", tensile test can be performed. A specimen made of different materials is subjected to an increasing axial tensile stress till failure. This unit allows the user to perform tensile tests with different...
Ver Equipamento
DEFLECTION OF CURVED BARS UNIT - MDB
  • MDB
Available
7.3.2.1.- ENSAIOS MECÂNICOS

MDB

Equipamento de Deflexão em Barras Curvas

The Deflection of Curved Bars Unit "MDB" consists of a structure of aluminum and steel that allows the incorporation of different curved bars to be studied. It allows tests with curved bars of different shape.The use of two dial gauges placed...
Ver Equipamento
BEAM DEFLECTION UNIT - MFV
  • MFV
Available
7.3.2.1.- ENSAIOS MECÂNICOS

MFV

Demonstrador de Deflexão em Vigas

The Beam Deflection Unit, "MFV" has been designed to enable the students to observe and study the following phenomena in simply supported beams and cantilever beams:Relation between the deflections and the applied loads.Effect of the length and...
Ver Equipamento
SHEAR FORCE AND BENDING MOMENTUM UNIT - MMF
  • MMF
Available
7.3.2.1.- ENSAIOS MECÂNICOS

MMF

Equipamento de Momento Fletor e Força de Corte

The Shear Force and Bending Momentum Unit, "MMF", unit is formed by an aluminum and steel structure that allows us to perform a mechanical study of different structures.An articulated structure makes it possible to convert the application of one...
Ver Equipamento
Solicitar informação