Top de Vendas

Os mais vendidos

Mostrando 271-300 de um total de 896 produto(s)

AUTOMOTIVE ELECTRONIC CONTROL DEVICE UNIT - AV-ECD

AV-ECD

Available

2.5.- ELETRÔNICA AUTOMOTIVA

AV-ECD

Equipamento de Dispositivo de Controle Eletrônicos Automotivo

The Automotive Electronic Control Device Unit, "AV-ECD", provides a practical solution to the introduction of electronic control units or ECUs.The Automotive Electronic Control Device Unit, "AV-ECD", is composed of an Electronic Control Unit (ECU)...

Available

9.1.- FUNDAMENTOS E CONCEITOS BÁSICOS DE TERMODINÂMICA

TPT

Equipamento de Distribuição de Pressão em Tubulações

The Nozzle Pressure Distribution Unit, "TPT", allows to investigate the pressure distribution and the mass flow rate in nozzles (convergentdivergent and convergent nozzles).The unit includes three types of nozzles:Convergent type (conical) nozzle,...

Available

7.2.1.- FREIOS E EMBREAGENS

MEM

Equipamento de Embreagem

The Plate Clutch, "MEM", allows to demonstrate the influence of the friction surface and the applied pressure of the springs on the transmitted torque for a friction clutch. To this end, several clutch discs with different diameters and...

COMPUTER CONTROLLED WIND ENERGY UNIT - EEEC

EEEC

Available

5.3.3.- ENERGIA EÓLICA

EEEC

Equipamento de Energia Eólica, Controlado por Computador (PC)

The Computer Controlled Wind Energy Unit, "EEEC", contains an aerogenerator, in laboratory-scale, and is used to study the conversion of kinetic wind energy into electrical energy and to study the influence of some factors on this generation.The...

Available

5.3.3.- ENERGIA EÓLICA

EEE

Equipamento de Energia Eólica.

The Wind Energy Unit, "EEE", contains an aerogenerator, in laboratory-scale, and is used to study the conversion of kinetic wind energy into electrical energy and to study the influence of some factors on this generation.The unit consists of a...

GEOTHERMAL (HIGH ENTHALPY) ENERGY UNIT - EG6B

EG6B

Available

5.3.5.- ENERGIA GEOTÉRMICA

EG6B

Equipamento de Energia Geotérmica (alta entalpia)

The Geothermal (high enthalpy) Energy Unit, "EG6B", developed by EDIBON, has the aim of introducing the student in a renewable energy, increasingly important.This unit simulates the steam produced in the well, by using a steam generator. Then the...

GEOTHERMAL (LOW ENTHALPY) ENERGY UNIT - EG5B

EG5B

Available

5.3.5.- ENERGIA GEOTÉRMICA

EG5B

Equipamento de Energia Geotérmica (baixa entalpia)

The Geothermal (low enthalpy) Energy Unit, "EG5B", designed by EDIBON, consists of a cooling circuit, a small tank with pipes covered with water (bath) and a chilling unit (heat pump). The inside of the earth is simulated with them. There is...

COMPUTER CONTROLLED GEOTHERMAL (LOW ENTHALPY) ENERGY UNIT - EG5C

EG5C

Available

5.3.5.- ENERGIA GEOTÉRMICA

EG5C

Equipamento de Energia Geotérmica (baixa entalpia), Controlado por Computador (PC)

The Computer Controlled Geothermal (low enthalpy) Energy Unit, "EG5C", designed by EDIBON, consists of a cooling circuit, a small tank with pipes covered with water (bath) and a chilling unit (heat pump). The inside of the earth is simulated with...

COMPUTER CONTROLLED SUBMARINE CURRENTS ENERGY UNIT - ECMC

ECMC

Available

5.3.4.- ENERGIA MARINHA

ECMC

Equipamento de Energia por Correntes Submarinas, Controlado por Computador (PC)

An interesting technology for harnessing the energy from the ocean currents is the use of turbine-driven generators anchored in place in the current stream.The blades of the turbine are driven by the moving water. These blades are used to turn the...

COMPUTER CONTROLLED TIDAL ENERGY UNIT - EMMC

EMMC

Available

5.3.4.- ENERGIA MARINHA

EMMC

Equipamento de Energia por Marés, Controlado por Computador (PC)

Tidal energy is another way to generate electricity extracting energy from the sea. Twice a day big volumes of water rise and fall with the tides.A Tidal Barrage make use of the potential energy in the difference in height (or head) between high...

COMPUTER CONTROLLED WAVES ENERGY UNIT - EOMC

EOMC

Available

5.3.4.- ENERGIA MARINHA

EOMC

Equipamento de Energia por Ondas, Controlado por Computador (PC)

The Computer Controlled Waves Energy Unit, "EOMC", is a unit in scale, designed to study the wave energy and the influence of several variables. The unit consists of a Base Service Unit and Waves Generator "EOMC-UB" and several Modules to be used...

COMPUTER CONTROLLED PHOTOVOLTAIC SOLAR ENERGY UNIT - EESFC

EESFC

Available

5.3.1.- ENERGIA SOLAR FOTOVOLTAICA

EESFC

Equipamento de Energia Solar Fotovoltaica, Controlado por Computador (PC)

The Computer Controlled Photovoltaic Solar Energy Unit, "EESFC", includes equipment that uses the photo-conversion law for the direct conversion of solar radiation into electricity. The absorbed energy is provided by simulated solar radiation,...

EESFB

Available

5.3.1.- ENERGIA SOLAR FOTOVOLTAICA

EESFB

Equipamento de Energia Solar Fotovoltaica.

The sun provides a wide spectrum of solar power. With the exception of the light we see around us every day, the rest of the solar power is invisible. Other parts of the spectrum consist of cosmic beams, gamma rays, x-rays, ultraviolet light,...

COMPUTER CONTROLLED THERMAL SOLAR ENERGY UNIT - EESTC

EESTC

Available

5.3.2.- ENERGIA SOLAR TÉRMICA

EESTC

Equipamento de Energia Solar Térmica, Controlado por Computador (PC)

The Computer Controlled Thermal Solar Energy Unit, "EESTC", is a system that transforms solar energy into usable thermal energy. It uses the thermosiphon solar system to heat water or the traditional pumping system. In both cases, the absorbed...

EEST

Available

5.3.2.- ENERGIA SOLAR TÉRMICA

EEST

Equipamento de Energia Solar Térmica.

The Thermal Solar Energy Unit, "EEST", is a system that transforms solar energy into usable thermal energy. It uses the thermosiphon solar system to heat water or the traditional pumping system. In both cases, the absorbed thermal energy is given...

MTSF

Available

14.1.2.2.- ENGRENAGENS

MTSF

Equipamento de Engrenagem de Rosca Sem-fim

The Worm and Wheel Unit, "MTSF", allows to demonstrate the principle of a worm gear.The unit consists in a worm and a wheel. These parts are mounted on ball bearings and fixed to a vertical panel.The worm and wheel are positioned a set distance...

EEDB

Available

7.3.2.1.- ENSAIOS MECÂNICOS

EEDB

Equipamento de Ensaio de Dureza "Brinell"

The Brinell Hardness Testing Unit, "EEDB", is a hardness tester that determines Brinell hardness in metals, hard alloys, tempered steels, etc. Besides, it can be used with other materials, such as rigid plastics, bakelite, etc.A penetrating ball...

BRINELL, VICKERS & ROCKWELL HARDNESS TESTING UNIT - EBVR

EBVR

Available

7.3.2.1.- ENSAIOS MECÂNICOS

EBVR

Equipamento de Ensaio de Dureza "Brinell", "Vickers" e "Rockwell"

The Brinell, Vickers and Rockwell Hardness Testing Unit, "EBVR", consists of a hardness testing machine that determines the three main types of hardness (Brinell, Vickers and Rockwell). It can be adapted to determine hardness of ferrous materials...

Available

7.3.2.1.- ENSAIOS MECÂNICOS

EEF

Equipamento de Ensaio de Fadiga

The Fatigue Testing Unit, "EEF", designed by EDIBON, allows to study the fatigue strength of the materials. For that purpose, fatigue tests are performed with different materials and notches.Optionally, with the additional recommended element Set...

EEFCR

Available

7.3.2.1.- ENSAIOS MECÂNICOS

EEFCR

Equipamento de Ensaio de Fluência "Creep"

The Creep Testing Unit, "EEFCR", for the creep testing is mounted on a structure of aluminum profiles which a painted steel panel is supported on.The "EEFCR" unit is designed to carry out experiments on specimens of plastic materials. Due to the...

CHARPY AND IZOD IMPACT TESTING UNIT - EEICI

EEICI

Available

7.3.2.1.- ENSAIOS MECÂNICOS

EEICI

Equipamento de Ensaio de Impacto Charpy e Izod

The Charpy and Izod Impact Testing Unit, "EEICI", consists of a pendulum supported on bearings with an arm of 330 mm long and a fastening system in the initial position of the test. The suitable hammer either for Charpy or Izod test is screwed to...

UNIVERSAL MATERIAL TESTING UNIT - EEU/20KN

EEU/20KN

Available

7.3.2.1.- ENSAIOS MECÂNICOS

EEU/20KN

Equipamento de Ensaio de Materiais Universal

The Universal Material Testing Unit, "EEU/20KN", is a didactic bench-top universal material testing unit. It is distinguished by its rigid construction, accurate control and a precise hydraulic system to apply loads of up to 20 kN, which enables...

MTTU

Available

7.3.2.1.- ENSAIOS MECÂNICOS

MTTU

Equipamento de Ensaio de Tração

With the Tensile Tester Unit, "MTTU", tensile test can be performed. A specimen made of different materials is subjected to an increasing axial tensile stress till failure. This unit allows the user to perform tensile tests with different...

COMPUTER CONTROLLED TWO-STAGE COMPRESSOR TEST UNIT - HCDEC

HCDEC

Available

8.7.5.- COMPRESSORES

HCDEC

Equipamento de Ensaios de Compressor de Dois Estágios, Controlado por Computador (PC)

The Computer Controlled Two-Stage Compressor Test Unit, "HCDEC", works with compressed air and presents as a principal device a compression bench with two pistons, low and high pressure.This unit presents four circuits or work dispositions which...

COMPUTER CONTROLLED FATIGUE TESTING UNIT - EEFC

EEFC

Available

7.3.2.1.- ENSAIOS MECÂNICOS

EEFC

Equipamento de Ensaios de Fadiga, Controlado por Computador (PC)

The Computer Controlled Fatigue Testing Unit, "EEFC", designed by EDIBON, allows to study the fatigue strength of the materials. For that purpose, fatigue tests are performed with different materials and notches.Optionally, with the additional...

Available

7.1.3.- ESTÁTICA E DINÂMICA

MED

Equipamento de Equilíbrio Dinâmico/Estático

The Static and Dynamic Balancing Unit, "MED", developed by EDIBON is a unit to study and analyze the oscillations and vibrations and how to eliminate or diminish them.Basically, the unit is formed by a shaft mounted on bearings. The shaft is...

COMPUTER CONTROLLED FLAME PROPAGATION AND STABILITY UNIT - TVPLC

TVPLC

Available

9.1.- FUNDAMENTOS E CONCEITOS BÁSICOS DE TERMODINÂMICA

TVPLC

Equipamento de Estabilidade e Propagação de Chama, Controlado por Computador (PC)

The Computer Controlled Flame Propagation and Stability Unit, "TVPLC", is a teaching unit which allows to obtain various flames by changing the quantities of the fuel – comburent mix. The unit is prepared to work with different gaseous fuels, so...

MEASUREMENT AND REGULATION STATION TRAINER - MRST

MRST

Available

9.10.3.- PRÁTICAS DE INSTALAÇÕES E MANUTENÇÃO

MRST

Equipamento de Estação de Medição e Regulação

The Measurement and Regulation Station Trainer,"MRST", designed by EDIBON is a totally accessible bench-top unit.The unit works with an air compressor that simulates the gas flowing inside the pipes (air testing), allowing to check the tightness...

MPCO

Available

7.1.5.- TRIBOLOGIA (ATRITO, DESGASTE, LUBRIFICAÇÃO)

MPCO

Equipamento de Estudo da Distribuição de Pressão em Rolamentos

The Journal Bearing Unit, "MPCO", allows to study the pressure distribution in sliding bearings. It illustrates the principle of hydrodynamic lubrication.The unit is mounted on a metallic structure assembled on wheels for its mobility.The sliding...

COMPUTER CONTROLLED UNIT TO STUDY THE EFFICIENCY OF A HEATING SYSTEM - TEHSC

TEHSC

Available

9.2.- VENTILAÇÃO, CALEFAÇÃO, AR CONDICIONADO E ÁGUA QUENTE SANITÁRIA

TEHSC

Equipamento de Estudo da Eficiência em um Sistema de Aquecimento, Controlado por Computador (PC)

The Computer Controlled Unit to Study the Efficiency of a Heating System, "TEHSC",designed by EDIBON allows for studying and analyzing a closed heating system made upof pipes with different diameter and fittings normally used in real heating...

PARA MAIS INFORMAÇÕES, CONTACTE-NOS