MCF/A Оборудование для ременной передачи с трением и динамометрами

7.1.5.- ТРИБОЛОГИЯ (ТРЕНИЕ, ИЗНОС, СМАЗКА) 14.1.5.- ТРИБОЛОГИЯ (ТРЕНИЕ, ИЗНОС, СМАЗКА)

ИННОВАЦИОННЫЕ СИСТЕМЫ

The Belt Friction Unit with Dynamometers, "MCF/A", allows studies and investigations to compare the friction coefficient for a given contact angle of a flat belt and a V-belt.

Посмотреть общее описание

Каталог

Спецификации конкурса

Расширения

ICAI

Программное Обеспечение для Интерактивного Компьютерного Обучения

НОВОСТИ ПО ТЕМЕ

ОБЩЕЕ ОПИСАНИЕ

The Belt Friction Unit with Dynamometers, "MCF/A", allows studies and investigations to compare the friction coefficient for a given contact angle of a flat belt and a V-belt.

With this unit it is possible to observe the relationship between tensions on both sides of a belt, to evaluate the differences between flat belts (different material) and V-belts and to investigate, among other things, the effect of the contact angle.

The pulley has different grooves to accommodate different belts and is balanced and mounted on bearings to reduce friction losses.

The pulley is driven by a crank and two dynamometers record the tensile forces at each end of the belt. Belt tension can be adjusted at one end of the belt.

УПРАЖНЕНИЯ И ПРИМЕРЫ С ИНСТРУКЦИЯМИ

РУКОВОДСТВО ПО ПРАКТИЧЕСКИМ УПРАЖНЕНИЯМ ВКЛЮЧЕНО В РУКОВОДСТВО ПОЛЬЗОВАТЕЛЯ

Evaluation of the differences between a flat belt and a V-belt.
Investigation of the relationship between the belt tension and the angle of lap for a flat belt.
Determination of the coefficient of friction between the pulley and the belt for the belt sections.
Verification of the belt tension equation.
Analysis of the effect of a badly fitted V-belt.

АНАЛОГИ ОБОРУДОВАНИЯ В НАЛИЧИИ

Available

7.1.5.- ТРИБОЛОГИЯ (ТРЕНИЕ, ИЗНОС, СМАЗКА)

MCF

Оборудование для ременной передачи с трением

The Belt Friction Unit, "MCF", allows us to carry out studies and investigations to compare the driving torque for a given degree of overlap of a flat belt (leather or rope) and a V belt.With this unit the relationship between the tensions in the...

ДОПОЛНИТЕЛЬНОЕ ОБОРУДОВАНИЕ

Available

7.1.5.- ТРИБОЛОГИЯ (ТРЕНИЕ, ИЗНОС, СМАЗКА)

MCF

Оборудование для ременной передачи с трением

Available

7.1.5.- ТРИБОЛОГИЯ (ТРЕНИЕ, ИЗНОС, СМАЗКА)

MEF

Оборудование для изучения трения

The Friction Study Unit, "MEF", allows the unit to illustrate the friction force by simple demonstrations.It is designed for the study of the relations between friction forces and normal forces, between hard or soft surfaces, between lubricated or...

MPCO

Available

7.1.5.- ТРИБОЛОГИЯ (ТРЕНИЕ, ИЗНОС, СМАЗКА)

MPCO

Оборудование для изучения распределения давления в подшипниках

The Journal Bearing Unit, "MPCO", allows to study the pressure distribution in sliding bearings. It illustrates the principle of hydrodynamic lubrication.The unit is mounted on a metallic structure assembled on wheels for its mobility.The sliding...

MEMT

Available

7.1.5.- ТРИБОЛОГИЯ (ТРЕНИЕ, ИЗНОС, СМАЗКА)

MEMT

Модульное оборудование для трибологии

The Tribology Modular Unit, "MEMT", consists of a base unit with electronic console and a series of experimental units to investigate and visualize tribological phenomena.MEMT-UB. Drive Unit for Tribological Tests. This unit is common for the...

DRIVE UNIT FOR TRIBOLOGICAL TESTS - MEMT-UB

MEMT-UB

Available

7.1.5.- ТРИБОЛОГИЯ (ТРЕНИЕ, ИЗНОС, СМАЗКА)

MEMT-UB

Приводное оборудование для трибологических испытаний

This unit is common for the modules type "MEMT". It consists of a base unit and an electronic console:The Base Unit consists of a drive unit formed by a DC motor with a shaft. The motor is mounted in a reduction gear, obtaining enough torque in...

RADIAL PRESSURE DISTRIBUTION IN A JOURNAL BEARING - MEMT-1

MEMT-1

Available

7.1.5.- ТРИБОЛОГИЯ (ТРЕНИЕ, ИЗНОС, СМАЗКА)

MEMT-1

Модуль Распределения Давления во Втулке

This unit allows the visualization of the radial pressure distribution in a journal bearing with hydrodynamic lubrication.The "MEMT-1" unit consists of a journal bearing with hydrodynamic lubrication, a freely moving bearing housing with thirteen...

DYNAMIC FRICTION OF A CYLINDER ON A ROLLER - MEMT-2

MEMT-2

Available

7.1.5.- ТРИБОЛОГИЯ (ТРЕНИЕ, ИЗНОС, СМАЗКА)

MEMT-2

Модуль Фрикционного Блока

This unit allows to demonstrate the friction forces between several cylinders of different materials and a roller under different lubrication conditions.The "MEMT-2" unit consists of two levers that transmit a force applied by weights to a test...

DYNAMIC FRICTION OF A PIN ON A DISC - MEMT-3

MEMT-3

Available

7.1.5.- ТРИБОЛОГИЯ (ТРЕНИЕ, ИЗНОС, СМАЗКА)

MEMT-3

Модуль Стержень-Диск

This unit allows to study the friction forces between several vertical friction pins of different materials and a rotating friction disc.The end of each vertical pin is made of a different material and rubs against the rotating steel disc. The...

MEMT-4

Available

7.1.5.- ТРИБОЛОГИЯ (ТРЕНИЕ, ИЗНОС, СМАЗКА)

MEMT-4

Модуль Пластины Прокатки

This module allows to determine the slip forces between two rotating friction discs in contact.The slip between the discs is maintained constant by a gearbox. The pressure can be adjusted with a lever and a set of weights. The unit includes a...

MEMT-5

Available

7.1.5.- ТРИБОЛОГИЯ (ТРЕНИЕ, ИЗНОС, СМАЗКА)

MEMT-5

Модуль Оптической Эластогидродинамики

This unit allows to investigate the thickness and characteristics of a lubricant film on a rolling sphere.The unit consists in a steel sphere and a driven glass disc.The sphere is pressed against the underside of the glass disc. The light from a...

MEMT-6

Available

7.1.5.- ТРИБОЛОГИЯ (ТРЕНИЕ, ИЗНОС, СМАЗКА)

MEMT-6

Модуль Фрикционных Автоколебаний с Периодическими Остановками

This module allows to demonstrate the static friction, the sliding friction, the related friction vibrations and the slip-stick effects.Several weights are placed on a horizontally rotating friction disc. It is prevented from turning by a cord....

Available

7.1.5.- ТРИБОЛОГИЯ (ТРЕНИЕ, ИЗНОС, СМАЗКА)

MCD

Оборудование для изучения тонкостенных цилиндров

The Thin Cylinder Unit, "MCD", has been developed to enable the student to verify various analytical formulae with actual measured results. Strain gauges mounted in various positions and orientations on the cylinder provide an opportunity for...

КАЧЕСТВО

ПОСЛЕПРОДАЖНОЕ ОБСЛУЖИВАНИЕ

ЧТОБЫ ПОЛУЧИТЬ БОЛЬШЕ ИНФОРМАЦИИ, СВЯЖИТЕСЬ С НАМИ