7.3.2.- ИСПЫТАНИЕ МАТЕРИАЛОВ

ПРОДУКТЫ ИСПЫТАНИЕ МАТЕРИАЛОВ

Показано 1-20 из 20

UNIVERSAL MATERIAL TESTING UNIT - EEU/20KN

EEU/20KN

Available

7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ

EEU/20KN

Устройство тестирования универсальных материалов

The Universal Material Testing Unit, "EEU/20KN", is a didactic bench-top universal material testing unit. It is distinguished by its rigid construction, accurate control and a precise hydraulic system to apply loads of up to 20 kN, which enables...

EEDB

Available

7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ

EEDB

Установка проверки твёрдости по Бринеллю

The Brinell Hardness Testing Unit, "EEDB", is a hardness tester that determines Brinell hardness in metals, hard alloys, tempered steels, etc. Besides, it can be used with other materials, such as rigid plastics, bakelite, etc.A penetrating ball...

BRINELL, VICKERS & ROCKWELL HARDNESS TESTING UNIT - EBVR

EBVR

Available

7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ

EBVR

Прибор для испытания твердости "Brinell", "Vickers" и "Rockwell"

The Brinell, Vickers and Rockwell Hardness Testing Unit, "EBVR", consists of a hardness testing machine that determines the three main types of hardness (Brinell, Vickers and Rockwell). It can be adapted to determine hardness of ferrous materials...

EEFCR

Available

7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ

EEFCR

Испытание магнитной вязкости

The Creep Testing Unit, "EEFCR", for the creep testing is mounted on a structure of aluminum profiles which a painted steel panel is supported on.The "EEFCR" unit is designed to carry out experiments on specimens of plastic materials. Due to the...

COMPUTER CONTROLLED FATIGUE TESTING UNIT - EEFC

EEFC

Available

7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ

EEFC

Стенд для испытания на усталостные нагрузки, управляемый с ПК

The Computer Controlled Fatigue Testing Unit, "EEFC", designed by EDIBON, allows to study the fatigue strength of the materials. For that purpose, fatigue tests are performed with different materials and notches.Optionally, with the additional...

Available

7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ

EEF

Испытание усталостных нагрузок

The Fatigue Testing Unit, "EEF", designed by EDIBON, allows to study the fatigue strength of the materials. For that purpose, fatigue tests are performed with different materials and notches.Optionally, with the additional recommended element Set...

CHARPY AND IZOD IMPACT TESTING UNIT - EEICI

EEICI

Available

7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ

EEICI

Испытание Шарпи и ударные испытания по Изоду

The Charpy and Izod Impact Testing Unit, "EEICI", consists of a pendulum supported on bearings with an arm of 330 mm long and a fastening system in the initial position of the test. The suitable hammer either for Charpy or Izod test is screwed to...

Available

7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ

MUP

Универсальное устройство продольного изгиба

The Universal Buckling Unit "MUP" is a bench-top unit whose frame is made of anodized aluminum profiles and plates and steel elements, on which a bubble level is installed to equilibrate the system.The unit has been designed to carry out tests...

MFLT

Available

7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ

MFLT

Машина для изучения смятия стержней

The Strut Buckling Unit "MFLT" allows the student to obtain experimentally the buckling critical load of slender struts subjected to compression.The unit allows to study the buckling of pieces of different lengths, ranging from 300 mm. to 625 mm.,...

MEBM

Available

7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ

MEBM

Оборудование для изучения модов панелирования Эйлера

With the Euler Buckling Modes Unit, "MEBM", the four Euler buckling cases are demonstrated, for which four elastic bars are fixed or supported in a frame and subjected to compression load with a system of weights.The elastic bars can be free or...

Available

7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ

MTP

Машина кручения и изгиба

The Torsion and Bend Unit, "MTP", is a combined apparatus for the demonstration of both torsion and bend to be used in the laboratory or as a complement of the theoretical study about torsion and bend. Its size and weight facilitate its transport...

Available

7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ

MTB

Оборудование для изгиба

The Torsion Unit, "MTB", allows to verify the basis of torsion and to perform practical exercises to demonstrate:Circular rods elastic torsion equation.The rigidity modulus of different materials.To perform the tests a metallic rod is fastened by...

Available

7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ

MTT

Оборудование для испытаний на изгиб (30 Нм)

To perform the tests, the test specimen is clamped and twisted by means of a flywheel and a worm gear until it breaks. The force is gradually applied to the specimen to observe the elastic strain produced. The specimen will deform and manifest...

MTTU

Available

7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ

MTTU

Машина для испытаний на растяжение

With the Tensile Tester Unit, "MTTU", tensile test can be performed. A specimen made of different materials is subjected to an increasing axial tensile stress till failure. This unit allows the user to perform tensile tests with different...

Available

7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ

MDB

Устройство прогиба изогнутого бруска

The Deflection of Curved Bars Unit "MDB" consists of a structure of aluminum and steel that allows the incorporation of different curved bars to be studied. It allows tests with curved bars of different shape.The use of two dial gauges placed...

Available

7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ

MFV

Устройство прогиба балки

The Beam Deflection Unit, "MFV" has been designed to enable the students to observe and study the following phenomena in simply supported beams and cantilever beams:Relation between the deflections and the applied loads.Effect of the length and...

SHEAR FORCE AND BENDING MOMENTUM UNIT - MMF

Available

7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ

MMF

Установка поперечной силы и изгибающего момента

The Shear Force and Bending Momentum Unit, "MMF", unit is formed by an aluminum and steel structure that allows us to perform a mechanical study of different structures.An articulated structure makes it possible to convert the application of one...

COMPUTER CONTROLLED ACOUSTIC IMPEDANCE TUBE/ACOUSTIC INSULATION TEST UNIT - TIAC

TIAC

Available

7.3.2.2.- ТЕПЛОВОЙ И АКУСТИЧЕСКИЙ ТЕСТЫ

TIAC

Акустический импеданс / устройство тестирования звукоизоляции, управляемое с ПК

This unit has been designed to provide students with an easy and simple method for understanding and investigating the relative acoustic properties of several materials. It demonstrates acoustic attenuation of a range of building materials as...

COMPUTER CONTROLLED NOISE CONTROL DEMONSTRATION UNIT - TDRC

TDRC

Available

7.3.2.2.- ТЕПЛОВОЙ И АКУСТИЧЕСКИЙ ТЕСТЫ

TDRC

Демонстрационное устройство контроля шума, управляемое с ПК

The Computer Controlled Noise Control Demonstration Unit, "TDRC", has been specifically designed to obtain visual and quantitative results related to noise and vibration control.The main parts of the unit are two noise sources consisting of a...

COMPUTER CONTROLLED THERMAL CONDUCTIVITY OF BUILDING AND INSULATING MATERIALS UNIT - TCMC

TCMC

Available

7.3.2.2.- ТЕПЛОВОЙ И АКУСТИЧЕСКИЙ ТЕСТЫ

TCMC

Устройство измерения теплопроводности сооружений и изоляционных материалов, управляемое с ПК

The Computer Controlled Thermal Conductivity of Building and Insulating Materials Unit, "TCMC", is a unit employed to measure thermal conductivity of low-conductivity materials, such as insulating materials.This unit is a calibrated instrument...

ЧТОБЫ ПОЛУЧИТЬ БОЛЬШЕ ИНФОРМАЦИИ, СВЯЖИТЕСЬ С НАМИ