6.2.5.- РАБОЧЕЕ МЕСТО С ПЛК

ПРОДУКТЫ РАБОЧЕЕ МЕСТО С ПЛК

Показано 1-30 из 43
PIECES FEEDER WORKSTATION - AE-PLC-APS
  • AE-PLC-APS
Available
6.2.5.1.- РАБОЧЕЕ МЕСТО ДЛЯ ЗАГРУЗКИ ФРАГМЕНТОВ ПРИЛОЖЕНИЙ

AE-PLC-APS

Станция нарезки на куски

The Pieces Feeder Workstation, "AE-PLC-APS", is a unit that works with pneumatics and electro-pneumatics technologies.The function of the "AE-PLC-APS" is to supply pieces and to verify them, if they are acceptable.The pieces will be supplied one...
FEEDING WORKSTATION FOR PIECES - AE-PLC-A
  • AE-PLC-A
Available
6.2.5.1.- РАБОЧЕЕ МЕСТО ДЛЯ ЗАГРУЗКИ ФРАГМЕНТОВ ПРИЛОЖЕНИЙ

AE-PLC-A

Станция подачи кусков

The "AE-PLC-A" is a feeder workstation commanded by a PLC that provides pieces to the system. The "AE-PLC-A" keeps the pieces in a vertical storage, the workstation take the pieces one by one and place at the quality control zone. The system...
MOUNTING WORKSTATION - AE-PLC-M
  • AE-PLC-M
Available
6.2.5.2.- РАБОЧЕЕ МЕСТО ОБРАБОТКИ ПРИЛОЖЕНИЙ

AE-PLC-M

Станция монтажа

The "AE-PLC-M" is a mounting workstation commanded by a PLC that provides pieces to the system and mount them inside of the base pieces.The "AE-PLC-M" keeps the pieces in a vertical storage. The workstation take the pieces one by one, the quality...
BOTTLING WORKSTATION - AE-PLC-MEMB
  • AE-PLC-MEMB
Available
6.2.5.2.- РАБОЧЕЕ МЕСТО ОБРАБОТКИ ПРИЛОЖЕНИЙ

AE-PLC-MEMB

Бутылочная станция

The "AE-PLC-MEMB" is a bottling workstation commanded by a PLC that provides pieces to the system and mount them inside of the base pieces.The "AE-PLC-MEMB" transport the input bottles, to the filling area. In this zone, the "AE-PLC-MEMB" fills...
DRILLING WORKSTATION - AE-PLC-ST
  • AE-PLC-ST
Available
6.2.5.2.- РАБОЧЕЕ МЕСТО ОБРАБОТКИ ПРИЛОЖЕНИЙ

AE-PLC-ST

Сверлильная станция

The "AE-PLC-ST" is an automatic drilling workstation commanded by a PLC. The "AE-PLC-ST" also include a conveyor system to transport the incoming pieces to the drilling zone where the drilling machine simulate the process.The "AE-PLC-ST"...
MOLDING WORKSTATION - AE-PLC-SMOLD
  • AE-PLC-SMOLD
Available
6.2.5.2.- РАБОЧЕЕ МЕСТО ОБРАБОТКИ ПРИЛОЖЕНИЙ

AE-PLC-SMOLD

Формовочная станция

The "AE-PLC-SMOLD" is an automatic molding workstation commanded by a PLC. The "AE-PLC-SMOLD" also include a conveyor system to transport the incoming pieces to the molding zone where the unit simulate a molding process by punching the piece with...
CUTTING WORKSTATION - AE-PLC-SCOR
  • AE-PLC-SCOR
Available
6.2.5.2.- РАБОЧЕЕ МЕСТО ОБРАБОТКИ ПРИЛОЖЕНИЙ

AE-PLC-SCOR

Отрезная станция

The "AE-PLC-SCOR" is an automatic cutting workstation commanded by a PLC. The "AE-PLC-SCOR" also includes a conveyor system to transport the incoming pieces to the cutting zone where the cutting machine simulate the process.The "AE-PLC-SCOR"...
FILTRATION WORKSTATION - AE-PLC-FT
  • AE-PLC-FT
Available
6.2.5.2.- РАБОЧЕЕ МЕСТО ОБРАБОТКИ ПРИЛОЖЕНИЙ

AE-PLC-FT

Станция фильтрации

The "AE-PLC-FT" is a filtration system commanded by a PLC. The "AE-PLC-FT" is composed of two tanks with a filter between them. The liquids are pumped from the first tank into the second tank through the filter using a pump and different types of...
MIXING WORKSTATION - AE-PLC-MS
  • AE-PLC-MS
Available
6.2.5.2.- РАБОЧЕЕ МЕСТО ОБРАБОТКИ ПРИЛОЖЕНИЙ

AE-PLC-MS

Станция смешивания

The "AE-PLC-MS" is a mixing system commanded by a PLC. The "AE-PLC-MS" is composed of three tanks with different liquids. These liquids are pumped and mixed in a reactor vessel using a pump and different valves. The system is equipped with flow...
FILLING WORKSTATION - AE-PLC-FS
  • AE-PLC-FS
Available
6.2.5.2.- РАБОЧЕЕ МЕСТО ОБРАБОТКИ ПРИЛОЖЕНИЙ

AE-PLC-FS

Станция наполнения

The "AE-PLC-FS" is a filling system commanded by a PLC. The workstation detects the bottles that arrive on a conveyor belt to the filling position and pumps liquids from a reservoir tank into the bottles using a pump and different types of valves....
CORKING WORKSTATION - AE-PLC-CRS
  • AE-PLC-CRS
Available
6.2.5.2.- РАБОЧЕЕ МЕСТО ОБРАБОТКИ ПРИЛОЖЕНИЙ

AE-PLC-CRS

Станция закупоривания

The "AE-PLC-CRS" is a corking system commanded by a PLC. The workstation detects the bottles that arrives on a conveyor belt to the corking position and closes them with a cap using a pressing cylinder. The "AE-PLC-CRS" also includes different...
CONTROL PROCESSES WORKSTATION - AE-PLC-CP
  • AE-PLC-CP
Available
6.2.5.2.- РАБОЧЕЕ МЕСТО ОБРАБОТКИ ПРИЛОЖЕНИЙ

AE-PLC-CP

Станция АСУ ТП

The "AE-PLC-CP" is a process control workstation commanded by a PLC that coordinates the work of 3 industrial controllers that regulates in parallel the level, flow rate, temperature and pressure processes. The "AE-PLC-CP" workstation has been...
ROTARY TABLE WORKSTATION 1 - AE-PLC-MR1
  • AE-PLC-MR1
Available
6.2.5.3.- РАБОЧЕЕ МЕСТО С ПОВОРОТНЫМ СТОЛОМ

AE-PLC-MR1

Станция вращающегося стола: Питание, Контроль Качества и Монтаж (измерительное исследование)

The Rotary Table Station: Feeding, Quality Control and Assembly (dimensional study), "AE-PLC-MR1", has been designed by EDIBON to study automatic rotary table systems for mounting, quality control, and feeding parts. It integrates a modular design...
ROTARY TABLE WORKSTATION 2 - AE-PLC-MR2
  • AE-PLC-MR2
Available
6.2.5.3.- РАБОЧЕЕ МЕСТО С ПОВОРОТНЫМ СТОЛОМ

AE-PLC-MR2

Станция вращающегося стола: Питание, Контроль Качества и Монтаж (изучение материала и цвета)

The "AE-PLC-MR2" an automatic rotary table with a feeder, quality control and mounting system integrated in it. The "AE-PLC-MR2" has a vertical storage, the system provide pieces one by one to the rotary table, then, a quality control system check...
ROTARY TABLE WORKSTATION 3 - AE-PLC-MR3
  • AE-PLC-MR3
Available
6.2.5.3.- РАБОЧЕЕ МЕСТО С ПОВОРОТНЫМ СТОЛОМ

AE-PLC-MR3

Станция вращающегося стола: Автоматический контроль обработки (исследование сверления и полировки)

The "AE-PLC-MR3" is a processing workstation with a rotary table commanded by a PLC. This unit takes a piece from the input area, checks if the position of piece is correct, and simulates drilling the piece with a movable drilling machine. Finally...
ROTARY TABLE WORKSTATION 4 - AE-PLC-MR4
  • AE-PLC-MR4
Available
6.2.5.3.- РАБОЧЕЕ МЕСТО С ПОВОРОТНЫМ СТОЛОМ

AE-PLC-MR4

Станция вращающегося стола: Наполнение, Бутылирование и Закупоривание

The "AE-PLC-MR4" is a rotary table workstation commanded by a PLC that perform the bottling, filling and capping functions.The "AE-PLC-MR4" workstation has been designed as a modular system to facilitate the understanding of the equipment...
PIECES MANIPULATOR WORKSTATION - AE-PLC-MPS
  • AE-PLC-MPS
Available
6.2.5.4.- РАБОЧЕЕ МЕСТО ДЛЯ УПРАВЛЕНИЯ ФРАГМЕНТАМИ ПРИЛОЖЕНИЙ

AE-PLC-MPS

Станция раздачи кусков

The "AE-PLC-MPS", Pieces Manipulator Workstation, is a unit that works with pneumatics, electro-pneumatics and vacuum technologies.The "AE-PLC-MPS" performs the following operation: moving a piece from one position to another by using suction pads...
POSITIONING WORKSTATION - AE-PLC-SPO
  • AE-PLC-SPO
Available
6.2.5.4.- РАБОЧЕЕ МЕСТО ДЛЯ УПРАВЛЕНИЯ ФРАГМЕНТАМИ ПРИЛОЖЕНИЙ

AE-PLC-SPO

Станция позиционирования

The Positioning Workstation, "AE-PLC-SPO", has been designed by EDIBON to studiy three-axis positioners for computer integrated manufacturing systems. It sorts incoming pieces based on material and dimensions using a PLC-controlled manipulator.The...
ELECTRICAL HANDLING WORKSTATION - AE-PLC-MAE
  • AE-PLC-MAE
Available
6.2.5.4.- РАБОЧЕЕ МЕСТО ДЛЯ УПРАВЛЕНИЯ ФРАГМЕНТАМИ ПРИЛОЖЕНИЙ

AE-PLC-MAE

Рабочая станция для электромонтажных работ

The "AE-PLC-MAE" is an electrical handling system commanded by a PLC. The "AE-PLC-MAE" is composed of a two axis electrical manipulator with a pneumatic gripper to transport the pieces from the input pieces holder to the corresponding position,...
PNEUMATIC HANDLING WORKSTATION - AE-PLC-MAN
  • AE-PLC-MAN
Available
6.2.5.4.- РАБОЧЕЕ МЕСТО ДЛЯ УПРАВЛЕНИЯ ФРАГМЕНТАМИ ПРИЛОЖЕНИЙ

AE-PLC-MAN

Рабочая станция для монтажа воздуховода

The "AE-PLC-MAN" is a pneumatic handling workstation commanded by a PLC, which performs handling and sorting functions.The workstation identify the color of the input pieces at the input pieces area, once the color is identified, the station take...
AC CONVEYOR BELT WORKSTATION - AE-PLC-CTCA
  • AE-PLC-CTCA
Available
6.2.5.4.- РАБОЧЕЕ МЕСТО ДЛЯ УПРАВЛЕНИЯ ФРАГМЕНТАМИ ПРИЛОЖЕНИЙ

AE-PLC-CTCA

Ленточный конвейер с двигателем переменного тока

The "AE-PLC-CTCA" is an AC powered conveyor system commanded by a PLC. The "AE-PLC-CTCA" is composed by a conveyor, 4 position sensors to stop the conveyor at different positions, motor positioner, AC motor driver and three-phased motor to a...
CC CONVEYOR BELT WORKSTATION - AE-PLC-CTCC
  • AE-PLC-CTCC
Available
6.2.5.4.- РАБОЧЕЕ МЕСТО ДЛЯ УПРАВЛЕНИЯ ФРАГМЕНТАМИ ПРИЛОЖЕНИЙ

AE-PLC-CTCC

Рабочая станция конвейера постоянного тока

The DC Conveyor Belt Workstation, "AE-PLC-CTCC", explores DC conveyor system management, including piece classification. It features industrial components like PLC, sensors, etc., enabling control of an automatic DC-powered conveyor system with...
Запросить информацию