AE-PLC-MS Станция смешивания

6.2.5.2.- РАБОЧЕЕ МЕСТО ОБРАБОТКИ ПРИЛОЖЕНИЙ

ИННОВАЦИОННЫЕ СИСТЕМЫ

The "AE-PLC-MS" is a mixing system commanded by a PLC.

Посмотреть общее описание

Каталог

Спецификации конкурса

Расширения

ICAI

Программное Обеспечение для Интерактивного Компьютерного Обучения

НОВОСТИ ПО ТЕМЕ

ОБЩЕЕ ОПИСАНИЕ

The "AE-PLC-MS" is a mixing system commanded by a PLC. The "AE-PLC-MS" is composed of three tanks with different liquids. These liquids are pumped and mixed in a reactor vessel using a pump and different valves. The system is equipped with flow and level sensors in order to obtain a precise mixing.

The "AE-PLC-MS" workstation has been designed as a modular system to facilitate the understanding of the equipment operation:

The PLC: is composed of an AE-PLCB that contains a HMI device, analog and digital input/output modules, etc. And the required extra modules to put into operation the workstation successfully.
The control panel: emergency stop push button switch, start/stop button, reset button, light indicator to show the state of the workstation, etc.
The workstation: is composed of real components used by the industrial automatic conveyor systems such as: capacitive sensors, limit switch sensors, position sensor, etc.

The "AE-PLC-MS" workstation can work alone and/or in conjunction with other workstations to make up a complete Flexible Manufacturing system*.

*The Flexible manufacturing systems product list is available at the "60.-MECHATRONICS, AUTOMATION AND COMPUMECHATRONICS" area.

НЕОБХОДИМЫЕ ЭЛЕМЕНТЫ

ДОПОЛНИТЕЛЬНЫЕ РЕКОМЕНДУЕМЫЕ ЭЛЕМЕНТЫ

AE-AS

АНАЛОГИ ОБОРУДОВАНИЯ В НАЛИЧИИ

AE-PLC-FT

Available

6.2.5.2.- РАБОЧЕЕ МЕСТО ОБРАБОТКИ ПРИЛОЖЕНИЙ

AE-PLC-FT

Станция фильтрации

The "AE-PLC-FT" is a filtration system commanded by a PLC. The "AE-PLC-FT" is composed of two tanks with a filter between them. The liquids are pumped from the first tank into the second tank through the filter using a pump and different types of...

AE-PLC-PHD

Available

6.2.5.2.- РАБОЧЕЕ МЕСТО ОБРАБОТКИ ПРИЛОЖЕНИЙ

AE-PLC-PHD

Штамповочная рабочая станция

The "AE-PLC-PHD" is a processing workstation commanded by a PLC. This unit takes a piece and introduces it inside the punching zone that is protected with a polycarbonate screen. Once the piece is inside the punching zone, the hydraulic punching...

AE-PLC-FS

Available

6.2.5.2.- РАБОЧЕЕ МЕСТО ОБРАБОТКИ ПРИЛОЖЕНИЙ

AE-PLC-FS

Станция наполнения

The "AE-PLC-FS" is a filling system commanded by a PLC. The workstation detects the bottles that arrive on a conveyor belt to the filling position and pumps liquids from a reservoir tank into the bottles using a pump and different types of valves....

AE-PLC-CRS

Available

6.2.5.2.- РАБОЧЕЕ МЕСТО ОБРАБОТКИ ПРИЛОЖЕНИЙ

AE-PLC-CRS

Станция закупоривания

The "AE-PLC-CRS" is a corking system commanded by a PLC. The workstation detects the bottles that arrives on a conveyor belt to the corking position and closes them with a cap using a pressing cylinder. The "AE-PLC-CRS" also includes different...

AE-PLC-APB

Available

6.2.5.2.- РАБОЧЕЕ МЕСТО ОБРАБОТКИ ПРИЛОЖЕНИЙ

AE-PLC-APB

Станция открывания бутылок

The "AE-PLC-APB" is a bottles opening system commanded by a PLC. The unit is equipped with different containers and a retention system based on a cylinder, in order to allow the Robotic Arm Workstation "AE-BR" or the SCARA Arm Workstation "AE-SCA"...

AE-PLC-M

Available

6.2.5.2.- РАБОЧЕЕ МЕСТО ОБРАБОТКИ ПРИЛОЖЕНИЙ

AE-PLC-M

Станция монтажа

The "AE-PLC-M" is a mounting workstation commanded by a PLC that provides pieces to the system and mount them inside of the base pieces.The "AE-PLC-M" keeps the pieces in a vertical storage. The workstation take the pieces one by one, the quality...

AUTOMATIC PRESSING WORKSTATION - AE-PLC-P

AE-PLC-P

Available

6.2.5.2.- РАБОЧЕЕ МЕСТО ОБРАБОТКИ ПРИЛОЖЕНИЙ

AE-PLC-P

Станция автоматического прессования

The "AE-PLC-P" is an automatic pressing workstation commanded by a PLC. The "AE-PLC-P" moves the pieces from the input zone tothe pressing zone, once the piece is detected in the pressing zone, the "AE-PLC-P" emulates pressing the pieces with a...

AE-PLC-AT

Available

6.2.5.2.- РАБОЧЕЕ МЕСТО ОБРАБОТКИ ПРИЛОЖЕНИЙ

AE-PLC-AT

Станция автоматического сборки

The "AE-PLC-AT" is an automatic screw workstation commanded by a PLC that supply and mount four screws in a piece. The "AE-PLC-AT" keeps the screws in a vertical storage. The workstation take the screws, one by one, and a pneumatic manipulator...

AE-PLC-MEMB

Available

6.2.5.2.- РАБОЧЕЕ МЕСТО ОБРАБОТКИ ПРИЛОЖЕНИЙ

AE-PLC-MEMB

Бутылочная станция

The "AE-PLC-MEMB" is a bottling workstation commanded by a PLC that provides pieces to the system and mount them inside of the base pieces.The "AE-PLC-MEMB" transport the input bottles, to the filling area. In this zone, the "AE-PLC-MEMB" fills...

AE-PLC-MET

Available

6.2.5.2.- РАБОЧЕЕ МЕСТО ОБРАБОТКИ ПРИЛОЖЕНИЙ

AE-PLC-MET

Станция наклейки стикеров

The "AE-PLC-MET" is an automatic labelling machine commanded by a PLC. The "AE-PLC-MET" also include a transporting system that carries the incoming bottles to the labelling zone, supplying the bottles one by one.The "AE-PLC-MET" workstation is...

AE-PLC-ST

Available

6.2.5.2.- РАБОЧЕЕ МЕСТО ОБРАБОТКИ ПРИЛОЖЕНИЙ

AE-PLC-ST

Сверлильная станция

The "AE-PLC-ST" is an automatic drilling workstation commanded by a PLC. The "AE-PLC-ST" also include a conveyor system to transport the incoming pieces to the drilling zone where the drilling machine simulate the process.The "AE-PLC-ST"...

AE-PLC-SMOLD

Available

6.2.5.2.- РАБОЧЕЕ МЕСТО ОБРАБОТКИ ПРИЛОЖЕНИЙ

AE-PLC-SMOLD

Формовочная станция

The "AE-PLC-SMOLD" is an automatic molding workstation commanded by a PLC. The "AE-PLC-SMOLD" also include a conveyor system to transport the incoming pieces to the molding zone where the unit simulate a molding process by punching the piece with...

AE-PLC-SCOR

Available

6.2.5.2.- РАБОЧЕЕ МЕСТО ОБРАБОТКИ ПРИЛОЖЕНИЙ

AE-PLC-SCOR

Отрезная станция

The "AE-PLC-SCOR" is an automatic cutting workstation commanded by a PLC. The "AE-PLC-SCOR" also includes a conveyor system to transport the incoming pieces to the cutting zone where the cutting machine simulate the process.The "AE-PLC-SCOR"...

CONTROL PROCESSES WORKSTATION - AE-PLC-CP

AE-PLC-CP

Available

6.2.5.2.- РАБОЧЕЕ МЕСТО ОБРАБОТКИ ПРИЛОЖЕНИЙ

AE-PLC-CP

Станция АСУ ТП

The "AE-PLC-CP" is a process control workstation commanded by a PLC that coordinates the work of 3 industrial controllers that regulates in parallel the level, flow rate, temperature and pressure processes. The "AE-PLC-CP" workstation has been...