AE-PLC-M Станция монтажа

6.2.5.2.- РАБОЧЕЕ МЕСТО ОБРАБОТКИ ПРИЛОЖЕНИЙ

ИННОВАЦИОННЫЕ СИСТЕМЫ

The "AE-PLC-M" is a mounting workstation commanded by a PLC that provides pieces to the system and mount them inside of the base pieces.

Посмотреть общее описание

Каталог

Спецификации конкурса

Расширения

ICAI

Программное Обеспечение для Интерактивного Компьютерного Обучения

НОВОСТИ ПО ТЕМЕ

ОБЩЕЕ ОПИСАНИЕ

The "AE-PLC-M" is a mounting workstation commanded by a PLC that provides pieces to the system and mount them inside of the base pieces.

The "AE-PLC-M" keeps the pieces in a vertical storage. The workstation take the pieces one by one, the quality control system verifies the height of the pieces and mount them inside of another piece. The "AE-PLC-M" includes a piece feeding system, a quality control system, a pneumatic handling system to complete the mounting process.

The "AE-PLC-M" workstation is designed as a modular system to facilitate the understanding of the unit. The main components are:

The PLC: is composed by the CPU limit and all extra modules needed to perform a corrent working of the workstation and all the extra modules needed to perform a correct working of the workstation.
The control panel: with start/stop button, emergency push button, reset button, light indicators to show current state of the process, etc.
The pneumatic circuit: it contains the required solenoid valves, the filters and regulators to assure the appropriate working of the unit.
The workstation: is composed by real industrial components used by the industrial feeder systems such as reed sensors, presence sensors, rotary actuators, vacuum cups, etc.

The "AE-PLC-M" is an independent workstation that can work alone and/or in conjunction with other workstation to make up a complete Flexible Manufacturing system*.

*The Flexible manufacturing systems product list is available at "Flexible Manufacturing Systems (FMS)" area of the general catalogue.

УПРАЖНЕНИЯ И ПРИМЕРЫ С ИНСТРУКЦИЯМИ

РУКОВОДСТВО ПО ПРАКТИЧЕСКИМ УПРАЖНЕНИЯМ ВКЛЮЧЕНО В РУКОВОДСТВО ПОЛЬЗОВАТЕЛЯ

Introduction to flexible manufacturing system (FMS).
Introduction to pneumatics and electro-pneumatics.
Study of the sensor detection.
Configuration of a pneumatic application.
Manual control of a mounting system.
Automatic control of a mounting system.
Change the parameters of the mounting process.
Optimization of the process time.
Study and analysis of the faults inserted in the process with the fault generation module.

НЕОБХОДИМЫЕ ЭЛЕМЕНТЫ

ДОПОЛНИТЕЛЬНЫЕ РЕКОМЕНДУЕМЫЕ ЭЛЕМЕНТЫ

AE-AS

АНАЛОГИ ОБОРУДОВАНИЯ В НАЛИЧИИ

AE-PLC-FT

Available

6.2.5.2.- РАБОЧЕЕ МЕСТО ОБРАБОТКИ ПРИЛОЖЕНИЙ

AE-PLC-FT

Станция фильтрации

The "AE-PLC-FT" is a filtration system commanded by a PLC. The "AE-PLC-FT" is composed of two tanks with a filter between them. The liquids are pumped from the first tank into the second tank through the filter using a pump and different types of...

AE-PLC-MS

Available

6.2.5.2.- РАБОЧЕЕ МЕСТО ОБРАБОТКИ ПРИЛОЖЕНИЙ

AE-PLC-MS

Станция смешивания

The "AE-PLC-MS" is a mixing system commanded by a PLC. The "AE-PLC-MS" is composed of three tanks with different liquids. These liquids are pumped and mixed in a reactor vessel using a pump and different valves. The system is equipped with flow...

AE-PLC-PHD

Available

6.2.5.2.- РАБОЧЕЕ МЕСТО ОБРАБОТКИ ПРИЛОЖЕНИЙ

AE-PLC-PHD

Штамповочная рабочая станция

The "AE-PLC-PHD" is a processing workstation commanded by a PLC. This unit takes a piece and introduces it inside the punching zone that is protected with a polycarbonate screen. Once the piece is inside the punching zone, the hydraulic punching...

AE-PLC-FS

Available

6.2.5.2.- РАБОЧЕЕ МЕСТО ОБРАБОТКИ ПРИЛОЖЕНИЙ

AE-PLC-FS

Станция наполнения

The "AE-PLC-FS" is a filling system commanded by a PLC. The workstation detects the bottles that arrive on a conveyor belt to the filling position and pumps liquids from a reservoir tank into the bottles using a pump and different types of valves....

AE-PLC-CRS

Available

6.2.5.2.- РАБОЧЕЕ МЕСТО ОБРАБОТКИ ПРИЛОЖЕНИЙ

AE-PLC-CRS

Станция закупоривания

The "AE-PLC-CRS" is a corking system commanded by a PLC. The workstation detects the bottles that arrives on a conveyor belt to the corking position and closes them with a cap using a pressing cylinder. The "AE-PLC-CRS" also includes different...

AE-PLC-APB

Available

6.2.5.2.- РАБОЧЕЕ МЕСТО ОБРАБОТКИ ПРИЛОЖЕНИЙ

AE-PLC-APB

Станция открывания бутылок

The "AE-PLC-APB" is a bottles opening system commanded by a PLC. The unit is equipped with different containers and a retention system based on a cylinder, in order to allow the Robotic Arm Workstation "AE-BR" or the SCARA Arm Workstation "AE-SCA"...

AUTOMATIC PRESSING WORKSTATION - AE-PLC-P

AE-PLC-P

Available

6.2.5.2.- РАБОЧЕЕ МЕСТО ОБРАБОТКИ ПРИЛОЖЕНИЙ

AE-PLC-P

Станция автоматического прессования

The "AE-PLC-P" is an automatic pressing workstation commanded by a PLC. The "AE-PLC-P" moves the pieces from the input zone tothe pressing zone, once the piece is detected in the pressing zone, the "AE-PLC-P" emulates pressing the pieces with a...

AE-PLC-AT

Available

6.2.5.2.- РАБОЧЕЕ МЕСТО ОБРАБОТКИ ПРИЛОЖЕНИЙ

AE-PLC-AT

Станция автоматического сборки

The "AE-PLC-AT" is an automatic screw workstation commanded by a PLC that supply and mount four screws in a piece. The "AE-PLC-AT" keeps the screws in a vertical storage. The workstation take the screws, one by one, and a pneumatic manipulator...

AE-PLC-MEMB

Available

6.2.5.2.- РАБОЧЕЕ МЕСТО ОБРАБОТКИ ПРИЛОЖЕНИЙ

AE-PLC-MEMB

Бутылочная станция

The "AE-PLC-MEMB" is a bottling workstation commanded by a PLC that provides pieces to the system and mount them inside of the base pieces.The "AE-PLC-MEMB" transport the input bottles, to the filling area. In this zone, the "AE-PLC-MEMB" fills...

AE-PLC-MET

Available

6.2.5.2.- РАБОЧЕЕ МЕСТО ОБРАБОТКИ ПРИЛОЖЕНИЙ

AE-PLC-MET

Станция наклейки стикеров

The "AE-PLC-MET" is an automatic labelling machine commanded by a PLC. The "AE-PLC-MET" also include a transporting system that carries the incoming bottles to the labelling zone, supplying the bottles one by one.The "AE-PLC-MET" workstation is...

AE-PLC-ST

Available

6.2.5.2.- РАБОЧЕЕ МЕСТО ОБРАБОТКИ ПРИЛОЖЕНИЙ

AE-PLC-ST

Сверлильная станция

The "AE-PLC-ST" is an automatic drilling workstation commanded by a PLC. The "AE-PLC-ST" also include a conveyor system to transport the incoming pieces to the drilling zone where the drilling machine simulate the process.The "AE-PLC-ST"...

AE-PLC-SMOLD

Available

6.2.5.2.- РАБОЧЕЕ МЕСТО ОБРАБОТКИ ПРИЛОЖЕНИЙ

AE-PLC-SMOLD

Формовочная станция

The "AE-PLC-SMOLD" is an automatic molding workstation commanded by a PLC. The "AE-PLC-SMOLD" also include a conveyor system to transport the incoming pieces to the molding zone where the unit simulate a molding process by punching the piece with...

AE-PLC-SCOR

Available

6.2.5.2.- РАБОЧЕЕ МЕСТО ОБРАБОТКИ ПРИЛОЖЕНИЙ

AE-PLC-SCOR

Отрезная станция

The "AE-PLC-SCOR" is an automatic cutting workstation commanded by a PLC. The "AE-PLC-SCOR" also includes a conveyor system to transport the incoming pieces to the cutting zone where the cutting machine simulate the process.The "AE-PLC-SCOR"...

CONTROL PROCESSES WORKSTATION - AE-PLC-CP

AE-PLC-CP

Available

6.2.5.2.- РАБОЧЕЕ МЕСТО ОБРАБОТКИ ПРИЛОЖЕНИЙ

AE-PLC-CP

Станция АСУ ТП

The "AE-PLC-CP" is a process control workstation commanded by a PLC that coordinates the work of 3 industrial controllers that regulates in parallel the level, flow rate, temperature and pressure processes. The "AE-PLC-CP" workstation has been...