At EDIBON, we are committed to strengthening skills as a strategic pillar for the competitiveness and social well-being of the European Union. Proper training not only boosts the economy but also enables individuals to fully participate in society and democracy.
AE-PLC-MAN Учебная пневматическая станция манипуляции
ИННОВАЦИОННЫЕ СИСТЕМЫ
The "AE-PLC-MAN" is a pneumatic handling workstation commanded by a PLC, which performs handling and sorting functions.
НОВОСТИ ПО ТЕМЕ
ОБЩЕЕ ОПИСАНИЕ
The "AE-PLC-MAN" is a pneumatic handling workstation commanded by a PLC, which performs handling and sorting functions.
The workstation identify the color of the input pieces at the input pieces area, once the color is identified, the station take the piece from the input pieces area and place them at two different positions. The "AE-PLC-MAN" workstation uses a two axis pneumatic manipulator with a pneumatic gripper to handling the pieces.
The "AE-PLC-MAN" workstation is designed as a modular system to facilitate the understanding of the unit. The main components are:
- The PLC: is composed by the CPU PLC unit and all the extra modules needed to perform a correct working of the workstation.
- The control panel: with start/stop button, emergency pushbutton, reset button, light indicators to show current state of the process, etc.
- The pneumatic circuit: contains the required solenoid valves, filters and regulators to assure the appropriate working of the unit.
- The workstation: is composed by real industrial components used by the industrial handling and sorting systems such as reed sensors, IR beam detectors, pneumatic grippers, pneumatic linear actuators, etc.
The "AE-PLC-MAN" is an independent workstation that can work alone and/or in conjunction with other workstation to make up a complete Flexible Manufacturing system*.
*The Flexible manufacturing systems product list is available at "Flexible Manufacturing Systems (FMS)" area of the general catalogue.
УПРАЖНЕНИЯ И ПРИМЕРЫ С ИНСТРУКЦИЯМИ
РУКОВОДСТВО ПО ПРАКТИЧЕСКИМ УПРАЖНЕНИЯМ ВКЛЮЧЕНО В РУКОВОДСТВО ПОЛЬЗОВАТЕЛЯ
- Introduction to flexible manufacturing system (FMS).
- Introduction to pneumatics and electro-pneumatics.
- Study of the sensor detection.
- Configuration of a pneumatic application.
- Manual control of a handling system.
- Automatic control of a handling system.
- Automatic control of a handling and sorting system.
- Change the parameters of the process.
- Optimize the process time.
- Study and analysis of the faults inserted in the process with the fault generation module.
АНАЛОГИ ОБОРУДОВАНИЯ В НАЛИЧИИ
6.2.5.4.- РАБОЧЕЕ МЕСТО ДЛЯ УПРАВЛЕНИЯ ФРАГМЕНТАМИ ПРИЛОЖЕНИЙ
AE-PLC-MAE
The "AE-PLC-MAE" is an electrical handling system commanded by a PLC. The "AE-PLC-MAE" is composed of a two axis electrical manipulator with a pneumatic gripper to transport the pieces from the input pieces holder to the corresponding position,...
6.2.5.4.- РАБОЧЕЕ МЕСТО ДЛЯ УПРАВЛЕНИЯ ФРАГМЕНТАМИ ПРИЛОЖЕНИЙ
AE-PLC-MPS
Учебная станция манипуляции деталями
The "AE-PLC-MPS", Pieces Manipulator Workstation, is a unit that works with pneumatics, electro-pneumatics and vacuum technologies.The "AE-PLC-MPS" performs the following operation: moving a piece from one position to another by using suction pads...
6.2.5.4.- РАБОЧЕЕ МЕСТО ДЛЯ УПРАВЛЕНИЯ ФРАГМЕНТАМИ ПРИЛОЖЕНИЙ
AE-PLC-T
Учебная станция линейного транспорта
The "AE-PLC-T" is a linear transporting system, which moves the pallets, that carries the pieces, along the system. The unit is configured in a closed loop conveyor powered by an electrical motor, the whole system is commanded by a PLC. The...
6.2.5.4.- РАБОЧЕЕ МЕСТО ДЛЯ УПРАВЛЕНИЯ ФРАГМЕНТАМИ ПРИЛОЖЕНИЙ
AE-PLC-SPO
Учебная станция позиционирования
The Positioning Workstation, "AE-PLC-SPO", has been designed by EDIBON to studiy three-axis positioners for computer integrated manufacturing systems. It sorts incoming pieces based on material and dimensions using a PLC-controlled manipulator.The...
6.2.5.4.- РАБОЧЕЕ МЕСТО ДЛЯ УПРАВЛЕНИЯ ФРАГМЕНТАМИ ПРИЛОЖЕНИЙ
AE-PLC-CTCA
Учебная станция ленточного конвейера переменного тока
The "AE-PLC-CTCA" is an AC powered conveyor system commanded by a PLC. The "AE-PLC-CTCA" is composed by a conveyor, 4 position sensors to stop the conveyor at different positions, motor positioner, AC motor driver and three-phased motor to a...
6.2.5.4.- РАБОЧЕЕ МЕСТО ДЛЯ УПРАВЛЕНИЯ ФРАГМЕНТАМИ ПРИЛОЖЕНИЙ
AE-PLC-CTCC
Учебная станция ленточного конвейера постоянного тока
The DC Conveyor Belt Workstation, "AE-PLC-CTCC", explores DC conveyor system management, including piece classification. It features industrial components like PLC, sensors, etc., enabling control of an automatic DC-powered conveyor system with...
6.2.5.4.- РАБОЧЕЕ МЕСТО ДЛЯ УПРАВЛЕНИЯ ФРАГМЕНТАМИ ПРИЛОЖЕНИЙ
AE-PLC-MACT
Учебная пневматическая станция манипуляции и конвейерной ленты
The Pneumatic Handling and Conveyor Belt, "AE-PLC-MACT", is an automatic handling station with a conveyor system commanded by a PLC. The "AE-PLC-MACT" is composed of a pneumatic handling system that uses vacuum technology to move pieces from the...
ДОПОЛНИТЕЛЬНОЕ ОБОРУДОВАНИЕ
6.2.5.4.- РАБОЧЕЕ МЕСТО ДЛЯ УПРАВЛЕНИЯ ФРАГМЕНТАМИ ПРИЛОЖЕНИЙ
AE-PLC-MPS
Учебная станция манипуляции деталями
The "AE-PLC-MPS", Pieces Manipulator Workstation, is a unit that works with pneumatics, electro-pneumatics and vacuum technologies.The "AE-PLC-MPS" performs the following operation: moving a piece from one position to another by using suction pads...
6.2.5.4.- РАБОЧЕЕ МЕСТО ДЛЯ УПРАВЛЕНИЯ ФРАГМЕНТАМИ ПРИЛОЖЕНИЙ
AE-PLC-T
Учебная станция линейного транспорта
The "AE-PLC-T" is a linear transporting system, which moves the pallets, that carries the pieces, along the system. The unit is configured in a closed loop conveyor powered by an electrical motor, the whole system is commanded by a PLC. The...
6.2.5.4.- РАБОЧЕЕ МЕСТО ДЛЯ УПРАВЛЕНИЯ ФРАГМЕНТАМИ ПРИЛОЖЕНИЙ
AE-PLC-SPO
Учебная станция позиционирования
The Positioning Workstation, "AE-PLC-SPO", has been designed by EDIBON to studiy three-axis positioners for computer integrated manufacturing systems. It sorts incoming pieces based on material and dimensions using a PLC-controlled manipulator.The...
6.2.5.4.- РАБОЧЕЕ МЕСТО ДЛЯ УПРАВЛЕНИЯ ФРАГМЕНТАМИ ПРИЛОЖЕНИЙ
AE-PLC-MAE
Учебная электрическая станция манипуляции
The "AE-PLC-MAE" is an electrical handling system commanded by a PLC. The "AE-PLC-MAE" is composed of a two axis electrical manipulator with a pneumatic gripper to transport the pieces from the input pieces holder to the corresponding position,...
6.2.5.4.- РАБОЧЕЕ МЕСТО ДЛЯ УПРАВЛЕНИЯ ФРАГМЕНТАМИ ПРИЛОЖЕНИЙ
AE-PLC-CTCA
Учебная станция ленточного конвейера переменного тока
The "AE-PLC-CTCA" is an AC powered conveyor system commanded by a PLC. The "AE-PLC-CTCA" is composed by a conveyor, 4 position sensors to stop the conveyor at different positions, motor positioner, AC motor driver and three-phased motor to a...
6.2.5.4.- РАБОЧЕЕ МЕСТО ДЛЯ УПРАВЛЕНИЯ ФРАГМЕНТАМИ ПРИЛОЖЕНИЙ
AE-PLC-CTCC
Учебная станция ленточного конвейера постоянного тока
The DC Conveyor Belt Workstation, "AE-PLC-CTCC", explores DC conveyor system management, including piece classification. It features industrial components like PLC, sensors, etc., enabling control of an automatic DC-powered conveyor system with...
6.2.5.4.- РАБОЧЕЕ МЕСТО ДЛЯ УПРАВЛЕНИЯ ФРАГМЕНТАМИ ПРИЛОЖЕНИЙ
AE-PLC-MACT
Учебная пневматическая станция манипуляции и конвейерной ленты
The Pneumatic Handling and Conveyor Belt, "AE-PLC-MACT", is an automatic handling station with a conveyor system commanded by a PLC. The "AE-PLC-MACT" is composed of a pneumatic handling system that uses vacuum technology to move pieces from the...