9.10.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

ПРОДУКТЫ ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

Показано 1-29 из 29

INTRODUCTION TO REFRIGERATION UNIT - TIR

Available

TIR

Оборудование для введения в системы охлаждения

The Introduction to Refrigeration Unit, "TIR", is a unit with exchangeable sets in which the components are mounted on plates and quickly connected by flexible hoses.The unit consists of a frame with a compressor, a refrigerant accumulator tank to...

TEMPERATURE MEASUREMENT TRAINING UNIT - TEMT

TEMT

Available

9.10.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

TEMT

Учебное оборудование для измерения температуры

The Temperature Measurement Training Unit, "TEMT", allows to compare the response of several devices to measure the temperature for different flows and different installation position of these devices.The unit includes four different measuring...

ASSEMBLY AND MAINTENANCE IN REFRIGERATION SYSTEMS UNIT - TAMR

TAMR

Available

9.10.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

TAMR

Оборудование для монтажа и обслуживания систем охлаждения

The Assembly and Maintenance in Refrigeration Systems Unit, "TAMR", has been designed to teach the students the planning, implementation and checking of processes related to the assembly, startup and maintenance of refrigeration systems.The fully...

COMPUTER CONTROLLED CAPACITY CONTROL AND FAULTS IN REFRIGERATION SYSTEMS - TCFRC

TCFRC

Available

9.10.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

TCFRC

Регулирование Мощности и Отказы в Установках Охлаждения, Управляемое компьютером (ПК)

The Computer Controlled Capacity Control and Faults in Refrigeration Systems, "TCFRC", has been designed by EDIBON to explore various power regulation techniques and simulate typical failures in refrigeration systems.Power regulation is crucial...

COMPUTER CONTROLLED REFRIGERATION AND AIR CONDITIONING MODULAR UNIT - TRAMC

TRAMC

Available

9.10.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

TRAMC

Модульное оборудование для систем охлаждения и кондиционирования воздуха, управляемое компьютером (ПК)

The minimum supply consists of two main elements: the TRAMC Unit Base, "TRAMC-UB", and at least one of the required elements described below. The models are interconnected by special refrigerant hoses.The main components of the TRAMC Unit Base,...

Аксессуар TRAMC

Available

9.10.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

TRAMC/1

Модель домашнего холодильника

Аксессуар TRAMC

The minimum supply consists of two main elements: the TRAMC Unit Base, "TRAMC-UB", and at least one of the required elements described below.The models are interconnected by special refrigerant hoses.The main components of the TRAMC Unit Base,...

REFRIGERATION SYSTEM WITH REFRIGERATION AND FREEZING STAGE MODEL - TRAMC/2

Аксессуар TRAMC

Available

9.10.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

TRAMC/2

Модель холодильной системы с этапами охлаждения и заморозки

Аксессуар TRAMC

The minimum supply consists of two main elements: the TRAMC Unit Base, "TRAMC-UB", and at least one of the required elements described below.The models are interconnected by special refrigerant hoses.The main components of the TRAMC Unit Base,...

SIMPLE AIR CONDITIONING SYSTEM MODEL FOR ROOM COOLING - TRAMC/3

Аксессуар TRAMC

Available

9.10.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

TRAMC/3

Простая модель системы кондиционирования воздуха для охлаждения помещения

Аксессуар TRAMC

COMPLETE AIR CONDITIONING SYSTEM MODEL - TRAMC/4

Аксессуар TRAMC

Available

9.10.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

TRAMC/4

Полная модель системы кондиционирования воздуха

Аксессуар TRAMC

The minimum supply consists of two main elements: the TRAMC Unit Base, "TRAMC-UB", and at least one of the required elements described below.The models are interconnected by special refrigerant hoses.The main components of the TRAMC Unit Base,...

MEASUREMENT AND REGULATION STATION TRAINER - MRST

MRST

Available

9.10.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

MRST

Оборудование для экспериментов с станцией регулировки и измерения

The Measurement and Regulation Station Trainer,"MRST", designed by EDIBON is a totally accessible bench-top unit.The unit works with an air compressor that simulates the gas flowing inside the pipes (air testing), allowing to check the tightness...

IGHT

Available

9.10.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

IGHT

Оборудование для экспериментов с мгновенным газовым обогревателем

The Instantaneous Gas Heater Trainer, ,IGHT,, designed by EDIBON, is a training unit with wheels to facilitate its mobility that represents a gas heater training system. The unit operates with air, simulating the operation of the heater, so it can...

Available

9.10.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

GBT

Оборудование для экспериментов с газовой горелкой принудительного горения

The Forced Air Gas Burner Trainer, "GBT", designed by EDIBON, is a compact teaching unit with wheels to facilitate its mobility. It represents a controlled gas system that supplies a forced air gas burner. It allows the study of the arrangement,...

GHST

Available

9.10.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

GHST

Оборудование для экспериментов с бытовым газоснабжением

The Gas Home Supply Trainer, ,GHST,, designed by EDIBON, consists of a teaching unit where the elements normally used on any domestic gas installation are arranged on the front panel of the unit as in a real installation.The unit works with air,...

ELECTRICAL INSTALLATIONS IN REFRIGERATION SYSTEMS UNIT - TEIR

TEIR

Available

9.10.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

TEIR

Оборудование для электрических установок в системах охлаждения

For this purpose this unit has been designed to teach the students about different circuits and electrical devices associated with the refrigeration field, how to carry out the wirings of these types of installations, how the refrigeration...

ELECTRICAL CONNECTION OF REFRIGERANT COMPRESSORS UNIT - TECR

TECR

Available

9.10.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

TECR

Оборудование для электрического подключения компрессоров хладагента

The Electrical Connection of Refrigerant Compressors Unit, "TECR", includes the electrical elements required for the start and operation of a refrigerant compressor and the necessary safety elements, arranged on a panel in a clear and visible way,...

ELECTRICAL FAULTS IN AIR CONDITIONING SYSTEMS UNIT - TEFA

TEFA

Available

9.10.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

TEFA

Оборудование для диагностики электрических неисправностей в системах кондиционирования воздуха

The Electrical Faults in Air Conditioning Systems Unit,"TEFA", is designed in a simple way in order to transmit comprehensible knowledge about how identify electrical faults in air conditioning systems. For this purpose, concepts are included to...

THBT

Available

9.10.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

THBT

Учебное оборудование для гидравлической балансировки радиаторов

The Hydraulic Radiator Balancing Training Unit, "THBT", allows the study of the amount of water with which to guarantee that all the radiators of an installation are supplied with sufficient hot water.The hydraulic balancing is carried out by...

Available

9.10.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

RT

Учебное оборудование с радиаторами

The Radiators Training Unit, "RT", has been designed to study hot water heating systems. These systems are called that way because they use water as working fluid between the generation system, usually a boiler, and the emitters, such as...

THST

Available

9.10.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

THST

Учебное оборудование для систем отопления

The Heating System Training Unit, "THST", has been designed to study central heating systems. The unit simulates a central heating system. For that purpose, it is made up of four radiators with a thermostatic valve each. This valve controls the...

THREE-WAY MIXING VALVE TRAINING UNIT - TEV3V

TEV3V

Available

9.10.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

TEV3V

Учебное оборудование для трехходового смесительного клапана

The Three-Way Mixing Valve Training Unit, "TEV3V", allows to demonstrate the function of a three-way mixing valve in a hot water heating system. The three-way mixing valve in the heating system regulates the supply water temperature to a heating...

FOUR-WAY MIXING VALVE TRAINING UNIT - TEV4V

TEV4V

Available

9.10.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

TEV4V

Учебное оборудование для четырехходового смесительного клапана

The Four-Way Mixing Valve Training Unit, "TEV4V", allows to demonstrate the function of a four-way mixing valve in a hot water heating system. The four-way mixing valve in the heating system regulates the circulation and feed flow temperatures of...

TEIS

Available

9.10.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

TEIS

Учебное оборудование для сантехнических аксессуаров

The Sanitary Fittings Training Unit, "TEIS", has been designed by EDIBON for training in the plumbing sector. It consists of an anodized aluminum frame and panels in painted steel in which tests can be carried out with the most common systems of...

TIAP

Available

9.10.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

TIAP

Оборудование для установки питьевой воды

The Drinking Water Installation Unit, "TIAP", has been designed to demonstrate domestic water heating from the cold water supply. A typical domestic drinking water system is attached to the front panel of the unit. The unit includes the most...

PROTECTION OF DRINKING WATER TRAINING UNIT - TPAP

TPAP

Available

9.10.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

TPAP

Оборудование для защиты питьевой установки

The Protection of Drinking Water Training Unit, "TPAP", has been designed by EDIBON to study cases in which the drinking water system is contaminated with wastewater. It is specially designed for the training of students in the plumbing sector.The...

TELT

Available

9.10.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

TELT

Оборудование для изучения систем очистки трубопроводов

The Pipe Cleaning Training Unit, "TELT", designed by EDIBON, simulates a real house piping system, so original components used in plumbing systems are employed.The objective of this unit is to study the cleaning of pipes from the sanitation...

TSID

Available

9.10.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

TSID

Оборудование для дренажных систем

With the Sewerage Unit, "TSID", tests about a wastewater sanitation system can be made and the flow in a sewage system can be observed.A complete sewage system can be observed with the "TSID" unit. The collection of wastewater from a series of...

TCPT

Available

9.10.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

TCPT

Учебное оборудование для циркуляционных насосов

The Circulating Pumps Training Unit, "TCPT", designed by EDIBON, is an advanced tool designed to facilitate the study and understanding of the operation of circulation pumps in heating systems and sanitary techniques. This unit allows...

TEVT

Available

9.10.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

TEVT

Учебное оборудование для расширительного бака

The Expansion Vessel Training Unit, "TEVT", is a test unit for sanitary and heating techniques that allows studying the operation of an expansion vessel. It also allows studying the pressure – volume characteristic curve of it. The aim element of...

PRESSURE VESSEL AND SAFETY FEATURES TRAINING UNIT - TPVST

TPVST

Available

9.10.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

TPVST

Учебное оборудование для резервуара под давлением и элементов безопасности

The Pressure Vessel and Safety Features Training Unit, "TPVST", is an experimentation of sanitary and heating techniques unit that allows studying the safety elements of a heating system with a pressure tank. It consists of a circuit of pipes for...

ЧТОБЫ ПОЛУЧИТЬ БОЛЬШЕ ИНФОРМАЦИИ, СВЯЖИТЕСЬ С НАМИ