销售冠军
Showing 601-630 of 909 item(s)
FLUID STATICS AND MANOMETRY - FME34
  • FME34
Available
8.1.2.- 测量
FME34
流体静力学和测压
The Fluid Statics and Manometry, "FME34", designed by EDIBON, allows the study of static fluids and manometry providing the user with an introduction in the behavior of liquids under hydrostatic conditions (fluids at standstill) and the...
FLOW VISUALIZATION IN CHANNELS - FME09
  • FME09
Available
8.1.5.- 流量显示
FME09
流动可视化渠道
The Flow Visualization in Channels unit, "FME09", designed by EDIBON, allows the visualization of liquid spillage phenomena in weirs and the study of objects submerged in a fluid stream (aerodynamics).The unit consists of a transparent...
FLOW, LEVEL, PRESSURE AND TEMPERATURE REGULATION FOR PROCESS CONTROL - FLPTU
  • FLPTU
Available
10.3.- 工业应用和系统
FLPTU
流量、液位、压力和温度调节过程控制
The "FLPTU", designed by EDIBON, allows the student to configure a flow, level, pressure and temperature control system, apart from studying the fundamentals of the control engineering on which they are based.The "FLPTU" unit consists of a hot...
FLOW RATE CONTROL MODULE - RYC-C
Available
6.1.1.1.- 理论实用基础
RYC-C
流量控制模块
配件 RYC, RYC/T
The "RYC-C" Flow Rate Control module has been designed to study a practical control system, through the flow rate of a close water circuit.The "RYC-C" module consists of two main components: the "RYC-C" apparatus and the "RYC-C" interface box. The...
FLOW TEST MODULE - BS4
  • 配件 BS
Available
6.1.2.1.- 传感器和电子仪器
BS4
流量测试模块
配件 BS
The objective of Flow Test Module, "BS4", is to show techniques to measure changeable fluids.The module is made up of two tanks assembled on a structure. In one of them there is a pumping system that allows to pump the water from the reserve tank,...
FLOWMETER CALIBRATOR - FME37
  • FME37
Available
8.1.2.- 测量
FME37
流量计校准器
The Flowmeter Calibrator, "FME37", designed by EDIBON, allows for the assessment of the accuracy and performance of the most commonly used flow meters. It features a panel of four-tube pressure gauges displaying pressure differences at various...
FLOW METERS DEMONSTRATION - FMDU
  • FMDU
Available
8.2.- 度量衡
FMDU
流量计演示
Flow Meters Demonstration, "FMDU", designed by EDIBON, demonstrates the important characteristics of fifteen types of flow meters used in the measurement of water flow through pipes or open channels.The main element is the FMDU Base Unit,...
FLOW METER DEMONSTRATION - FME18
  • FME18
Available
8.1.2.- 测量
FME18
流量计示范
The Flow Meter Demonstration, "FME18", designed by EDIBON, allows through 3 different flow measurement accessories: Venturi tube, orifice plate and a variable area meter installed in series in the unit, the study to find the flow rate of the fluid...
APPLICATIONS OF LIGHT - M44
  • M44
Available
14.2.1.5.- 仪表与控制
M44
测光模块
This unit allows different practices related to the measurement of light intensity to be carried out. Photodiodes are semiconductor light sensors that generate a current or voltage when the P-N junction in the semiconductor is illuminated with...
PILOT PLANT FOR CONCENTRATED JUICE PRODUCTION - FR00/JC
  • FR00/JC
Available
水果、蔬菜和豆类的试验工厂
FR00/JC
浓缩果汁生产试验厂
The Pilot Plant for Concentrated Juice Production, "FR00/JC", is a scale size pilot-plant equipped to carry out all industrial stages of concentrated juice production.In the production plant of concentrate juices, the process begins with the...
LEVEL CONTROL MODULE - RYC-N
Available
6.1.1.1.- 理论实用基础
RYC-N
液位控制模块
配件 RYC, RYC/T
The "RYC-N" Level Control module has been designed to study a practical control system, through the control of the water level of a tank.The "RYC-N" module consists of two main components: the "RYC-N" apparatus and the "RYC-N" interface box. The...
LIQUID LEVEL TEST MODULE - BS6
  • 配件 BS
Available
6.1.2.1.- 传感器和电子仪器
BS6
液位测试模块
配件 BS
The Liquid level Test Module, "BS6", has been designed to teach the use and applications of level sensors and their measurement systems. This module teaches techniques to measure and control the liquid level in a tank.On this there is a two tanks...
HYDRAULIC AND ELECTRO-HYDRAULIC APPLICATION - AE-HD
  • AE-HD
Available
6.1.3.1.- 液压系统
AE-HD
液压和电液应用
The Hydraulic and Electro-Hydraulic Application, "AE-HD", is a modular unit consisting of a great variety of optional kits and elements to configure the desired Hydraulic and Electro-Hydraulic circuit.The optional hydraulic kits available with the...
HYDRAULICS BENCH - FME00
  • FME00
Available
8.1.1.- 基本单位
FME00
液压工作台
The Hydraulics Bench, "FME00", designed by EDIBON, allows the study of fluid behaviour, hydraulic theory and the properties of fluid mechanics.It is formed by a movable hydraulics bench used to hold a wide variety of modules, which allow the...
DEEP BED FILTER UNIT - EFLP
  • EFLP
Available
11.1.11.- 过滤, 沉淀和混合
EFLP
深床过滤装置
The Deep Bed Filter Unit, "EFLP", allows us to filter a fluid in order to eliminate particles in suspension, to have it in more adequate conditions for its subsequent use or consumption.The pump takes raw water from one of the reservoirs of the...
FRANCIS TURBINE - FME28
  • FME28
Available
8.1.7.- 液压机: 涡轮机
FME28
混流式水轮机
With the Francis Turbine unit, "FME28", designed by EDIBON, we study the Francis turbines commonly used when we have average flow rates and heights.This unit consists on a miniature Francis turbine. The water inlet flow is controlled by a valve...
PERMEABILITY/FLUIDISATION STUDIES UNIT - PEFP
  • PEFP
Available
11.1.1.- 流化
PEFP
渗透/流化研究小组
The Permeability/Fluidisation Studies Unit, "PEFP", allows to observe the behaviour of liquid fluidisation in a granular bed. The main element is a permeability meter. It is a transparent cylinder that supports the soil sample to be studied....
DEMONSTRATION INFILTRATION UNIT - PEDI
  • PEDI
Available
13.1.- 水文水文地质学
PEDI
渗透示范设备
The Demonstration Infiltration Unit, "PEDI", has been developed for the comparative study of infiltration processes in the laboratory, which are essential for the study of any form of irrigation. Water movement through the soil can be seen and...
TEMPERATURE CONTROL MODULE - RYC-TE
Available
6.1.1.1.- 理论实用基础
RYC-TE
温度控制模块
配件 RYC, RYC/T
The "RYC-TE" Temperature Control module has been designed to study a practical control system, through the control of the water temperature in a tank.The "RYC-TE" module consists of two main components: the "RYC-TE" apparatus and the "RYC-TE"...
TEMPERATURE TEST MODULE - BS2
  • 配件 BS
Available
6.1.2.1.- 传感器和电子仪器
BS2
温度测试模块
配件 BS
The Temperature Test Module, "BS2", has been designed to teach the use and applications of sensors of temperature as a measure, and its control.We have a half-open space in whose interior there are two lamps that are going to heat that space....
RADIAL PRESSURE DISTRIBUTION IN A JOURNAL BEARING - MEMT-1
Available
7.1.5.- 摩擦学 (摩擦, 磨损, 润滑)
MEMT-1
滑动轴承中的径向压力分布
配件 MEMT
This unit allows the visualization of the radial pressure distribution in a journal bearing with hydrodynamic lubrication.The "MEMT-1" unit consists of a journal bearing with hydrodynamic lubrication, a freely moving bearing housing with thirteen...
UNIT TO STUDY A SHAFT WITH JOURNAL BEARINGS ASSEMBLY - SJBA
  • SJBA
Available
7.4.2.- 可拆卸模型
SJBA
滑动轴承树安装设备
The Unit to Study a Shaft with Journal Bearings Assembly, "SJBA", unit consists of two shaft bearings at the ends and a ground steel shaft. The slide bearing consists of two parts, the bearing itself, which is the part of the assembly that is in...
SLIDER CRANK MECHANISM - MBD
  • MBD
Available
7.1.2.1.- 机制
MBD
滑块连杆机构
The Slider Crank Mechanism, "MBD", designed by EDIBON, is an example of slider-crank mechanism.This mechanism is made of aluminum and consists of a rotary element (graduated disc), called crank, connected to a rigid bar, calledconnecting rod. When...
DYNAMIC FRICTION OF A CYLINDER ON A ROLLER - MEMT-2
Available
7.1.5.- 摩擦学 (摩擦, 磨损, 润滑)
MEMT-2
滚筒上圆柱体的动态摩擦
配件 MEMT
This unit allows to demonstrate the friction forces between several cylinders of different materials and a roller under different lubrication conditions.The "MEMT-2" unit consists of two levers that transmit a force applied by weights to a test...
FILTERS MODULE - N-M8
  • N-M8
Available
14.2.1.2.- 模拟电子
N-M8
滤波器模块
An electronic filter is an element that allows electrical signals to pass through it, at a specific frequency or frequency ranges while preventing the passage of others, being able to modify both, their amplitude and phase. It is a device that...
PACKING LINE AND BOTTLING PLANT  - N-EM-PELE
  • N-EM-PELE
Available
6.2.2.1.- 制造系统
N-EM-PELE
灌装厂和包装线
The "N-EM" are a series of emulators that provide the students the required hardware to emulate the most common automatic systems.The "N-EM" modules are designed to work with the "AE-PLC" units to obtain the fundamental knowledge of PLC...
HEAT EXCHANGER TRAINING SYSTEM - TICB
  • TICB
Available
9.7.- 换热器
TICB
热交换器训练系统
Heat exchangers are widely used in refrigeration, air conditioning, heating, energy generation, chemical processing, etc. They have many applications in engineering and, as a consequence, there are many models adapted to each application to obtain...
要求信息