- 主页
- 产品
- 1.- 物理学
- 学术课程
- 2.- 电子学
- 3.- 通讯
- 4.- 电力
- 5.- 能源
- 6.- 机电一体化与自动化
- 7.- 力学
- 8.- 流体力学
- 9.- 热力学与热工学
- 10.- 过程控制
- 11.- 化学工程
- 12.- 食品科技
- 13.- 环境
- 14.- 生物醫學工程
- 实验室配件
- 定制试验工厂
- 模块
- 拡張
- 实验室
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 业务范围
- 技术
- 資料下載
- 关于我们
- 新闻
- 聯繫我們
Setting up at Faculté des Sciences at the Université d’Etat d’Haiti
We want to present our new installation in the Faculté des Sciences at the Université d’Etat d’Haiti, specifically in the Fluid Mechanics Department. There, we have installed many of our equipment, among which are: AFT, CF80/5 (with CFAS, CFFS, CFPLR, CFPR, CFRM, CFSDL, CFTP, CFTS, CFVD, CFVEN, CFVG accessories), ESED, ESH(2x1m), FME00, FME02, FME12, FME13, FME16, FME18, FME28, FME29, PDFD, PPTAC/1 and SPFB. We are very happy to continue working on projects like this and we hope that students can improve their practical training thanks to these new units. It was a pleasure!
相關產品
8.1.1.- 基本单位
FME00
The Hydraulics Bench, "FME00", designed by EDIBON, allows the study of fluid behaviour, hydraulic theory and the properties of fluid mechanics.It is formed by a movable hydraulics bench used to hold a wide variety of modules, which allow the...
8.1.6.- 液压机: 泵
FME12
串/并联泵
The Series/Parallel Pumps unit, "FME12", designed by EDIBON, allows the study of the coupling between two series/parallel centrifugal pumps, obtaining the characteristic curves as well as the calculation of the water flow rate.The unit consists of...
8.5.- 液压通道
CF
流体通道(截面:80X300毫米)
Channel, through which water flows, of rectangular section with transparent walls that enable to observe all the experiments. Water is taken from the storage tank by means of a hydraulic pump and, by the pipe, it is driven to the inlet tank, where...
8.1.6.- 液压机: 泵
FME13
离心泵特性
The Centrifugal Pump Characteristics, "FME13", designed by EDIBON, allows the study of several centrifugal pump characteristics such as efficiency, series/parallel couplings, etc.The unit has a centrifugal pump with similar characteristics to the...
8.1.2.- 测量
FME18
流量计示范
The Flow Meter Demonstration, "FME18", designed by EDIBON, allows through 3 different flow measurement accessories: Venturi tube, orifice plate and a variable area meter installed in series in the unit, the study to find the flow rate of the fluid...
11.1.11.- 过滤, 沉淀和混合
ESED
泥沙研究设备
The Sedimentation Study Unit, "ESED", designed by EDIBON, allows studying and compare the sedimentation processes of several suspensions simultaneously.It is formed by five sedimentation methacrylate cylinders mounted vertically on a panel,...
8.8.- 流体管道系统
AFT
Fluid Friction in Pipes Unit, with Hydraulics Bench (FME00)
The Fluid Friction in Pipes Unit, with Hydraulics Bench (FME00), "AFT", is designed to determine the friction coefficient in pipes of several diameters and roughness, to study the pressure losses in different types of valves and different fittings...
13.1.- 水文水文地质学
ESH(2x1m)
Hydrologic Systems, Rain Simulator and Irrigation Systems Unit (2x1 m)
The Hydrological Systems, Rainfall Simulator and Irrigation Systems (2x1 m), "ESH(2x1m)", has been designed by EDIBON to demonstrate some of the physical processes encountered in hydrology and fluvial geomorphology. This includes rainfall...
8.1.2.- 测量
FME02
堰过流
The Flow over Weirs, "FME02", designed by EDIBON, has many elements that are used in combination with the Hydraulics Bench (FME00): A special mouthpiece is coupled to the outlet mouthpiece for water in the Hydraulics Bench (FME00).Two soothing...
8.1.7.- 液压机: 涡轮机
FME29
卡普兰涡轮机
With the Kaplan Turbine unit, "FME29", designed by EDIBON, we study the Kaplan turbines commonly used when we have high flow rates but low flow height.This unit consists on a miniature Kaplan turbine. The water inlet flow is controlled by a valve...
8.1.7.- 液压机: 涡轮机
FME16
水斗式水轮机
The Pelton Turbine unit, "FME16", designed by EDIBON, allows the study of the characteristics of the tangential wheels or pressure turbines commonly used to produce electricity in hydroelectric plants to exploit large hydraulic jumps of low...
13.3.- 废水处理
SPFB
Sedimentation, Precipitation and Flocculation Unit
The Sedimentation, Precipitation and Flocculation Unit, "SPFB", has been designed by EDIBON to study the parameters that affect the physicochemical treatment of wastewater for purification. The objective of the unit is to reduce colloidal and...