AE-PLC-CRS 塞盖工作站

6.2.5.2.- 过程工作站的应用
CORKING WORKSTATION - AE-PLC-CRS

創新系統

The "AE-PLC-CRS" is a corking system commanded by a PLC.

查看一般說明

扩展

ICAI

交互式计算机辅助教学软件

相關新聞

EDIBON and its commitment to European Skills
EDIBON and its commitment to European Skills
At EDIBON, we are committed to strengthening skills as a strategic pillar for the competitiveness and social well-being of the European Union. Proper training not only boosts the economy but also enables individuals to fully participate in society and democracy.
阅读更多

一般說明

The "AE-PLC-CRS" is a corking system commanded by a PLC. The workstation detects the bottles that arrives on a conveyor belt to the corking position and closes them with a cap using a pressing cylinder. The "AE-PLC-CRS" also includes different sensors in order to check if the amount of liquid in the bottles is correct.

The "AE-PLC-CRS" workstation has been designed as a modular system to facilitate the understanding of the equipment operation:

  • The PLC: is composed of an AE-PLCB that contains a HMI device, analog and digital input/output modules, etc, and the required extra modules to put into operation the workstation successfully.
  • The control panel: emergency stop push button switch, start/stop button, reset button, light indicator to show the state of the workstation, etc.
  • The workstation: is composed of real components used by the industrial automatic conveyor systems such as: capacitive sensors, limit switch sensors, position sensor, etc.

The "AE-PLC-CRS" workstation can work alone and/or in conjunction with other workstations to make up a complete Flexible Manufacturing system*.

*The Flexible manufacturing systems product list is available at the "60.-MECHATRONICS, AUTOMATION AND COMPUMECHATRONICS" area.

所需物品

推荐的其他项目

可用的类似设备

FILTERING WORKSTATION - AE-PLC-FT
  • AE-PLC-FT
Available
6.2.5.2.- 过程工作站的应用
AE-PLC-FT
过滤工作站
The "AE-PLC-FT" is a filtration system commanded by a PLC. The "AE-PLC-FT" is composed of two tanks with a filter between them. The liquids are pumped from the first tank into the second tank through the filter using a pump and different types of...
查看单位
MIXING WORKSTATION - AE-PLC-MS
  • AE-PLC-MS
Available
6.2.5.2.- 过程工作站的应用
AE-PLC-MS
混合工作站
The "AE-PLC-MS" is a mixing system commanded by a PLC. The "AE-PLC-MS" is composed of three tanks with different liquids. These liquids are pumped and mixed in a reactor vessel using a pump and different valves. The system is equipped with flow...
查看单位
PUNCHING WORKSTATION - AE-PLC-PHD
  • AE-PLC-PHD
Available
6.2.5.2.- 过程工作站的应用
AE-PLC-PHD
冲压工作站
The "AE-PLC-PHD" is a processing workstation commanded by a PLC. This unit takes a piece and introduces it inside the punching zone that is protected with a polycarbonate screen. Once the piece is inside the punching zone, the hydraulic punching...
查看单位
FILLING WORKSTATION - AE-PLC-FS
  • AE-PLC-FS
Available
6.2.5.2.- 过程工作站的应用
AE-PLC-FS
加注工作站
The "AE-PLC-FS" is a filling system commanded by a PLC. The workstation detects the bottles that arrive on a conveyor belt to the filling position and pumps liquids from a reservoir tank into the bottles using a pump and different types of valves....
查看单位
BOTTLE OPENING WORKSTATION - AE-PLC-APB
  • AE-PLC-APB
Available
6.2.5.2.- 过程工作站的应用
AE-PLC-APB
罐子开盖工作站
The "AE-PLC-APB" is a bottles opening system commanded by a PLC. The unit is equipped with different containers and a retention system based on a cylinder, in order to allow the Robotic Arm Workstation "AE-BR" or the SCARA Arm Workstation "AE-SCA"...
查看单位
MOUNTING WORKSTATION - AE-PLC-M
  • AE-PLC-M
Available
6.2.5.2.- 过程工作站的应用
AE-PLC-M
装配工作站
The "AE-PLC-M" is a mounting workstation commanded by a PLC that provides pieces to the system and mount them inside of the base pieces.The "AE-PLC-M" keeps the pieces in a vertical storage. The workstation take the pieces one by one, the quality...
查看单位
AUTOMATIC PRESSING WORKSTATION - AE-PLC-P
  • AE-PLC-P
Available
6.2.5.2.- 过程工作站的应用
AE-PLC-P
自动压机工作站
The "AE-PLC-P" is an automatic pressing workstation commanded by a PLC. The "AE-PLC-P" moves the pieces from the input zone tothe pressing zone, once the piece is detected in the pressing zone, the "AE-PLC-P" emulates pressing the pieces with a...
查看单位
AUTOMATIC SCREWDRIVING WORKSTATION - AE-PLC-AT
  • AE-PLC-AT
Available
6.2.5.2.- 过程工作站的应用
AE-PLC-AT
自动拧紧工作站
The "AE-PLC-AT" is an automatic screw workstation commanded by a PLC that supply and mount four screws in a piece. The "AE-PLC-AT" keeps the screws in a vertical storage. The workstation take the screws, one by one, and a pneumatic manipulator...
查看单位
BOTTLING WORKSTATION - AE-PLC-MEMB
  • AE-PLC-MEMB
Available
6.2.5.2.- 过程工作站的应用
AE-PLC-MEMB
装瓶工作站
The "AE-PLC-MEMB" is a bottling workstation commanded by a PLC that provides pieces to the system and mount them inside of the base pieces.The "AE-PLC-MEMB" transport the input bottles, to the filling area. In this zone, the "AE-PLC-MEMB" fills...
查看单位
LABELLING WORKSTATION - AE-PLC-MET
  • AE-PLC-MET
Available
6.2.5.2.- 过程工作站的应用
AE-PLC-MET
标签工作站
The "AE-PLC-MET" is an automatic labelling machine commanded by a PLC. The "AE-PLC-MET" also include a transporting system that carries the incoming bottles to the labelling zone, supplying the bottles one by one.The "AE-PLC-MET" workstation is...
查看单位
DRILLING WORKSTATION - AE-PLC-ST
  • AE-PLC-ST
Available
6.2.5.2.- 过程工作站的应用
AE-PLC-ST
钻孔工作站
The "AE-PLC-ST" is an automatic drilling workstation commanded by a PLC. The "AE-PLC-ST" also include a conveyor system to transport the incoming pieces to the drilling zone where the drilling machine simulate the process.The "AE-PLC-ST"...
查看单位
MOLDING WORKSTATION - AE-PLC-SMOLD
  • AE-PLC-SMOLD
Available
6.2.5.2.- 过程工作站的应用
AE-PLC-SMOLD
模具成型工作站
The "AE-PLC-SMOLD" is an automatic molding workstation commanded by a PLC. The "AE-PLC-SMOLD" also include a conveyor system to transport the incoming pieces to the molding zone where the unit simulate a molding process by punching the piece with...
查看单位
CUTTING WORKSTATION - AE-PLC-SCOR
  • AE-PLC-SCOR
Available
6.2.5.2.- 过程工作站的应用
AE-PLC-SCOR
切割工作站
The "AE-PLC-SCOR" is an automatic cutting workstation commanded by a PLC. The "AE-PLC-SCOR" also includes a conveyor system to transport the incoming pieces to the cutting zone where the cutting machine simulate the process.The "AE-PLC-SCOR"...
查看单位
PROCESS CONTROL WORKSTATION - AE-PLC-CP
  • AE-PLC-CP
Available
6.2.5.2.- 过程工作站的应用
AE-PLC-CP
过程控制工作站
The "AE-PLC-CP" is a process control workstation commanded by a PLC that coordinates the work of 3 industrial controllers that regulates in parallel the level, flow rate, temperature and pressure processes. The "AE-PLC-CP" workstation has been...
查看单位

質量

售後服務

要求信息