7.4.3.- 安装和维护惯例

安装和维护惯例 UNITS

Showing 1-23 of 23 item(s)

DRIVE, SHAFT, AND GEAR ALIGNMENT UNIT - ADSG

ADSG

Available

7.4.3.- 安装和维护惯例

ADSG

驱动、轴和齿轮对准设备

The Drive, Shaft, and Gear Alignment Unit, "ADSG", allows for studying the coupling and uncoupling, maintenance, repair of the related units and checking the operation with the following units:CGA. Combined Gear Assembly Unit.SGA. Spur Gear...

COMPUTER CONTROLLED MACHINE DIAGNOSIS UNIT - MDUC

MDUC

Available

7.4.3.- 安装和维护惯例

MDUC

机器诊断设备，由计算机控制

The Computer Controlled Machine Diagnosis Unit, "MDUC", of EDIBON, allows you to perform vibration measurement practical exercises, measuring the displacement, velocity and acceleration of vibrations in the time-frequency range.The Computer...

Available

7.4.3.- 安装和维护惯例

MDU

机器诊断

The family of Machine Diagnosis Unit, "MDU", of Edibon, allows you to perform vibration measurement practical exercises, measuring the displacement, velocity and acceleration of vibrations in the time-frequency range.The MDU Base Unit, "MDU-UB",...

配件 MDU

Available

7.4.3.- 安装和维护惯例

MDU-MLB

MDU设备移动结构

配件 MDU

The Mobile Structure for MDU, "MDU-MLB", is a robust structure designed to quickly and easily assemble the various elements of the MDU Base Unit, "MDU-UB" or the Computer Controlled Machine Diagnosis Unit, "MDUC", and thus assemble a mobile test...

配件 MDU

Available

7.4.3.- 安装和维护惯例

MDU-SM

MDU设备桌面结构

配件 MDU

A bench-top structure consisting of a slotted table with anodized aluminum frames of 1100 x 770 x 820 mm.It has a transparent protective cover that protects against the rotating parts and allows us to observe the different experiments. The cover...

SOFTWARE, SENSORS AND CONTROL FOR MDU UNIT - MDU-SSC

配件 MDU

Available

7.4.3.- 安装和维护惯例

MDU-SSC

MDU设备的软件、传感器和控制

配件 MDU

The aim of the vibration analyzer is to assess the machine diagnosis testing with the different kits related to the vibration interface technology.The system consists of two acceleration sensors, a speed sensor, a measuring amplifier with...

配件 MDU

Available

7.4.3.- 安装和维护惯例

MDU-BLU

制动和负载设备

配件 MDU

The Break and Load Unit, "MDU-BLU", of EDIBON is a magnetic particle brake, a display unit and an electrical control. It is possible to precisely adjust the braking moment. The excitation current is used as a measurement of the braking moment and...

配件 MDU

Available

7.4.3.- 安装和维护惯例

MDU-SES

弹性树套装

配件 MDU

The Set of Elastic Shaft, "MDU-SES", of EDIBON allows to study the behavior of an elastic rotor subjected to imbalance and balance of elastic rotors in operation. It is possible to study the resonance and the phenomena occurred in subcritical and...

SET OF ROTATING SHAFT WITH CRANK - MDU-SRS

配件 MDU

Available

7.4.3.- 安装和维护惯例

MDU-SRS

裂纹轴套装

配件 MDU

It is important that fissures resulting from material fatigue in rotating machines are detected in good time before the breakage occurs, which usually leads to fatal consequences.The Set of Rotating Shaft with Crank, "MDU-SRS", consists of two...

SET OF ROLLER BEARINGS WITH FAULTS - MDU-SRBF

配件 MDU

Available

7.4.3.- 安装和维护惯例

MDU-SRBF

轴承缺陷套装

配件 MDU

To determine the remaining life cycle of a roller bearing and decide on its replacement, the slow variation of the vibration spectrum is analyzed. The spectral distribution will enable to draw accurate conclusions about the type of defect and its...

配件 MDU

Available

7.4.3.- 安装和维护惯例

MDU-SCO

连接件套装

配件 MDU

The Set of Couplings, "MDU-SCO", allows to compare the properties of different couplings such as curved tooth, bolt, flange and claw couplings.The vibrational behavior of the different types of couplings is important to draw conclusions about...

配件 MDU

Available

7.4.3.- 安装和维护惯例

MDU-SBD

皮带传动套装

配件 MDU

The belt drives are noiseless drive devices, have a long life and require little maintenance provided that its design, assembly and adjustment are correct.The Set of Belt Drive, "MDU-SBD", allows to study the conditions that cause vibrations or...

配件 MDU

Available

7.4.3.- 安装和维护惯例

MDU-SSDG

齿轮缺陷套装

配件 MDU

The Set to Study Damage in Gears, "MDU-SSDG", allows to study the vibrational behavior of gears with typical defects.For that purpose, gears with tooth defects and gears without defects are included, so a comparative study can be carried out. The...

配件 MDU

Available

7.4.3.- 安装和维护惯例

MDU-SCM

连杆机构套装

配件 MDU

The compressors and pumps frequently use crank and connecting rod mechanisms. The force and mass oscillations cause vibrations in the units.The Set of Crank Mechanism, "MDU-SCM", allows to adjust the stroke, mass compensation and bearing...

SET TO STUDY CAVITATION IN PUMPS - MDU-SSCP

配件 MDU

Available

7.4.3.- 安装和维护惯例

MDU-SSCP

泵腔汽蚀套装

配件 MDU

Pump cavitation is produced when steam cavities are created within a fluid in which forces act responding to the pressure differences.Cavitation causes noise, damage to components and loss of performance.The Set to Study Cavitation in Pumps,...

配件 MDU

Available

7.4.3.- 安装和维护惯例

MDU-SSVF

MDU风机振动套装

配件 MDU

In the Blower Vibration Set for MDU, "MDU-SSVF", the vibrations are magnetically induced. It is possible to study three impellers with a different number of movable vanes. It is also possible to study the gyroscopic effect by mounting the flywheel...

SET OF ELECTROMECHANICAL VIBRATIONS - MDU-SEV

配件 MDU

Available

7.4.3.- 安装和维护惯例

MDU-SEV

电机振动套装

配件 MDU

Among the drive systems are the asynchronous motors, which generate vibrations in machines.This is the case with an asymmetric air gap (space between rotor and stator), in which the magnetic vibrational forces induce torsional and bending...

DISPLACEMENT SENSORS FOR MDU UNIT - MDU-SD

配件 MDU

Available

7.4.3.- 安装和维护惯例

MDU-SD

MDU设备位移传感器

配件 MDU

Two displacement sensors which, together with the Set of Elastic Shaft ,"MDU-SES", and the Software, Sensors and Control for MDU Unit, "MDU-SSC", allow you to represent subcritical and supercritical shaft orbits in resonance.

COMPUTER CONTROLLED UNIT TO STUDY VIBRATIONS IN MACHINE SUPPORTING STRUCTURES - VMSC

VMSC

Available

7.4.3.- 安装和维护惯例

VMSC

Computer Controlled Unit to Study Vibrations in Machine Supporting Structures

With the Computer Controlled Unit to Study Vibrations in Machine Supporting Structures, "VMSC", the problems of vibration isolation and construction of supporting structures are studied through practical exercises. In order to carry out the study,...

MSCT

Available

7.4.3.- 安装和维护惯例

MSCT

Screw Joint Testing Unit

The Screw Joint Testing Unit, "MSCT", represents the simulation of a tightening set consisting of a screw and a nut on two rectangular shaped beams.A very precise torque wrench performs the tightening through a threaded rod and a flywheel. The...

MSLG

Available

7.4.3.- 安装和维护惯例

MSLG

Unit to Study Lathe Gears

The Unit to Study Lathe Gears, "MSLG", represents the gears of a typical lathe in a machining workshop, including: a main adjustable transmission gear, one Norton gearbox for the machining of specific threads and pitches, a pinion switching gear...

BASIC UNIT OF MECHANICAL DRIVE SYSTEMS - MDSU

MDSU

Available

7.4.3.- 安装和维护惯例

MDSU

Basic Unit of Mechanical Drive Systems

The Basic Unit of Mechanical Drive Systems, "MDSU", consists of a main frame where a series of accessories and elements are arranged, distributed in modules of different level, thought to introduce the user in the field of mechanical systems and...

Available

7.4.3.- 安装和维护惯例

RGT

Rigging Training Unit

The Rigging Training Unit, "RGT", has been designed for the study of techniques to move loads of various shapes, sizes and types safely. The unit consists of an adjustable height gantry frame made of welded steel and beam attachment points. The...

如需更多信息，请联系我们