Are you a teacher or do you work as an engineering researcher? EDIBON offers courses for teachers and #research staff. Take a look at the course Basic Mechanics and learn about #forces and vectors. #DiscoverEdibon #Engineering.
MARP 抛物线拱单元
創新系統
The Parabolic Arch Unit, "MARP", allows to study an isostatic (or statically determinate) parabolic arch (having one fixed support and one movable support) or a hyperstatic (or statically indeterminate) parabolic arch (having both supports fixed) under load, the deformations generated and the reactions of the supports of the arch.
相關新聞
一般說明
The Parabolic Arch Unit "MARP" contains a pre-shaped articulated arch, which can be subjected to point or evenly distributed loads by means of seven uniformly distributed cables (cords) with hangers.
One support of the arch is fixed whereas the other support can be fixed or movable in horizontal direction. When both supports are fixed, the hyperstatic arch conditions will be studied (1 degree of freedom), whereas if one of the supports is movable, the isostatic arch conditions will be analyzed (0 degrees of freedom).
To fix the movable support, so that it works as a fixed support, a set of weights is used to cancel out the horizontal displacement and another set of weights to balance the vertical reaction of the support.
To measure the deformation of the arch under load the unit has two dial gauges, one that measures the horizontal displacement of the free support and another that measures the bending of the arch.
練習和指導練習
手册中包含的指导实践练习
- Study of the mechanical principles of a parabolic arch.
- Differences between an isostatic arch and a hyperstatic arch.
- Analysis of the arch under load: Measurement of the deformations. Measurement of the reactions of the supports in the hyperstatic arch.
- Influence of a point load or an evenly distributed load on the reactions at the support and on the deformation of the arch.
- Evaluation of the relation between applied load and horizontal displacement.
- Comparison of the horizontal displacement with theoretical values.
- Analysis of the horizontal thrust.
配套设备
7.1.6.- 结构力学
MFPG
The Unit for studying Forces in a Jib Crane, "MFPG", is designed to study the tensile and compressive forces in a planar central force system based on the example of a crane jib.The unit represents a planar central force system in which multiple...
7.1.6.- 结构力学
MVS
悬索桥测试设备
The Suspension Bridge Unit, "MVS", has been meticulously designed by EDIBON to explore the dynamics of stresses in a suspension bridge system. This unit simulates a suspension bridge using a deck and two parallel main cables, allowing students to...
7.1.6.- 结构力学
MART
三铰链弧单元
The Three-Hinged Arch Unit "MART" allows the student to become familiar with three-hinged arches, to calculate the bearing forces (for point load, for uniformly distributed load and for moving load), to investigate the influence of the load on the...
7.1.6.- 结构力学
MFBS
Unit for studying Forces in a Simple Bar Structure
The Unit for Studying Forces in a Simple Bar Structure, "MFBS", designed by EDIBON allows the study of forces acting on a simple truss when is subjected to a point load in one of the nodes that make up the structure.It consists of a group of five...
7.1.6.- 结构力学
MFCS1
通过不同平面杆架学习力学的设备
The Unit for studying Forces in Different Single Plane Trusses, "MFCS1", allows the measurement of the bar forces in various single plane trusses, the study of the dependency on the external force and the comparison of the experimental bar forces...
7.1.6.- 结构力学
MFCS2
通过超定杆架学习力学的设备
The Unit for studying Forces in an Overdeterminate Truss, "MFCS2", allows the measurement of the bar forces in a statically determinate truss and in a statically overdeterminate truss, the study of the distribution of forces in the single plane...
7.1.6.- 结构力学
MFCS3
学习杆架变形的设备
The Unit for studying Deformation of Trusses, "MFCS3", allows the measurement of the stresses in the bars in different types of trusses, and the study of the dependence of the external force and the comparison of the experimental forces in the...
7.1.6.- 结构力学
MCPG
Thick Walled Cylinder Unit
In the Thick-Walled Cylinder Unit, "MCPG", the stresses are determined through the measurement of the strains produced on the surface. These strains are measured by strain gauges.The thick-walled vessel consists of an aluminum cylinder of length...
7.1.6.- 结构力学
MFL
双铰接拱设备
The Two Hinged Arch Unit, "MFL", designed by EDIBON allows to study the response of an arched beam when an external load is applied on it.The arch is supported on two supports, a fixed one and a movable one. The displacement and horizontal...
7.1.6.- 结构力学
MPO
门式钢架结构测试装置
The Portal Frame Unit, "MPO", designed by EDIBON, allows for precise measurements of vertical and horizontal deflection in an embedded rectangular portal frame. By applying various loads with specific weights, changes in the portal frame’s...
7.1.6.- 结构力学
STH
Stress Hypotheses Unit
The Stress Hypotheses Unit, "STH", allows the study and testing of stress hypotheses by applying loads in different directions on a test specimen point and measuring the deformations produced.Normal and shear stresses are applied, avoiding...
7.1.6.- 结构力学
MEPE
稳定性学习设备
The Simple Stability Problems Study Unit, "MEPE", has been designed to study the stability of a bar subjected to buckling by obtaining the critical load in different configurations. The unit consists of two bars of same length connected by a...