AE-PLC-MR3 转盘工作站：自动加工控制（钻孔和抛光研究）

6.2.5.3.- 旋转工作站应用
ROTARY TABLE WORKSTATION: AUTOMATED PROCESSING CONTROL (DRILLING AND POLISHING STUDY) - AE-PLC-MR3

創新系統

The "AE-PLC-MR3" is a processing workstation with a rotary table commanded by a PLC.

查看一般說明

扩展

ICAI

交互式计算机辅助教学软件

相關新聞

EDIBON and its commitment to European Skills
EDIBON and its commitment to European Skills
At EDIBON, we are committed to strengthening skills as a strategic pillar for the competitiveness and social well-being of the European Union. Proper training not only boosts the economy but also enables individuals to fully participate in society and democracy.
阅读更多

一般說明

The "AE-PLC-MR3" is a processing workstation with a rotary table commanded by a PLC. This unit takes a piece from the input area, checks if the position of piece is correct, and simulates drilling the piece with a movable drilling machine. Finally the workstation places the piece to the exit piece area. The "AE-PLC-MR3" also includes a polish tool to change the process and simulates the polishing of the piece.

The "AE-PLC-MR3" workstation is designed as a modular system to facilitate the understanding of the unit. The main components are:

  • The PLC: is composed by the CPU PLC unit and all the extra modules needed to perform a correct working of the workstation.
  • The control panel: with start/stop button, emergency pushbutton, reset button, light indicators to show current state of the process, etc.
  • The workstation: is composed by real industrial components used by the industrial processing systems with rotary tables such as limit switch sensors, capacitive sensors, drilling machine, etc.

The "AE-PLC-MR3" is an independent workstation that can work alone and/or in conjunction with other workstations to make up a complete Flexible Manufacturing system*.

*The Flexible manufacturing systems product list is available at "Flexible Manufacturing Systems (FMS)" area of the general catalogue.

練習和指導練習

手册中包含的指导实践练习

  1. Introduction to flexible manufacturing system (FMS).
  2. Introduction to electrical actuators.
  3. Study of the sensor detection.
  4. Manual control of the rotary table system.
  5. Manual control of the quality control and drilling process on a rotary table.
  6. Automatic control of the rotary table system.
  7. Automatic control of the quality control and drilling process on a rotary table.
  8. Change the parameters of the rotary table process.
  9. Optimize the process time.
  10. Study and analysis of the faults inserted in the process with the fault generation module.

所需物品

推荐的其他项目

可用的类似设备

ROTARY TABLE WORKSTATION: FILLING, BOTTLING AND CAPPING - AE-PLC-MR4
  • AE-PLC-MR4
Available
6.2.5.3.- 旋转工作站应用
AE-PLC-MR4
转盘工作站：灌装、装瓶和封盖
The "AE-PLC-MR4" is a rotary table workstation commanded by a PLC that perform the bottling, filling and capping functions.The "AE-PLC-MR4" workstation has been designed as a modular system to facilitate the understanding of the equipment...
查看单位

質量

售後服務

要求信息