MDU-SCM 连杆机构套装

7.4.3.- 安装和维护惯例

創新系統

The Set of Crank Mechanism, "MDU-SCM", allows to adjust the stroke, mass compensation and bearing clearance, as well as the speed, to simulate vibrations.

查看一般說明

比赛规格

一般說明

The compressors and pumps frequently use crank and connecting rod mechanisms. The force and mass oscillations cause vibrations in the units.

The Set of Crank Mechanism, "MDU-SCM", allows to adjust the stroke, mass compensation and bearing clearance, as well as the speed, to simulate vibrations.

The load is exerted by springs.

When you want to simulate the force obtained by a gas compression, a higher torque is required, for which it is recommended to use the Set of Belt Drive, "MDU-SBD", or the Set to Study Damage in Gears, "MDU-SSDG".

所需物品

配套设备

DRIVE, SHAFT, AND GEAR ALIGNMENT UNIT - ADSG

ADSG

Available

7.4.3.- 安装和维护惯例

ADSG

驱动、轴和齿轮对准设备

The Drive, Shaft, and Gear Alignment Unit, "ADSG", allows for studying the coupling and uncoupling, maintenance, repair of the related units and checking the operation with the following units:CGA. Combined Gear Assembly Unit.SGA. Spur Gear...

COMPUTER CONTROLLED MACHINE DIAGNOSIS UNIT - MDUC

MDUC

Available

7.4.3.- 安装和维护惯例

MDUC

机器诊断设备，由计算机控制

The Computer Controlled Machine Diagnosis Unit, "MDUC", of EDIBON, allows you to perform vibration measurement practical exercises, measuring the displacement, velocity and acceleration of vibrations in the time-frequency range.The Computer...

Available

7.4.3.- 安装和维护惯例

MDU

机器诊断

The family of Machine Diagnosis Unit, "MDU", of Edibon, allows you to perform vibration measurement practical exercises, measuring the displacement, velocity and acceleration of vibrations in the time-frequency range.The MDU Base Unit, "MDU-UB",...

MDU-MLB

Available

7.4.3.- 安装和维护惯例

MDU-MLB

MDU设备移动结构

The Mobile Structure for MDU, "MDU-MLB", is a robust structure designed to quickly and easily assemble the various elements of the MDU Base Unit, "MDU-UB" or the Computer Controlled Machine Diagnosis Unit, "MDUC", and thus assemble a mobile test...

MDU-SM

Available

7.4.3.- 安装和维护惯例

MDU-SM

MDU设备桌面结构

A bench-top structure consisting of a slotted table with anodized aluminum frames of 1100 x 770 x 820 mm.It has a transparent protective cover that protects against the rotating parts and allows us to observe the different experiments. The cover...

SOFTWARE, SENSORS AND CONTROL FOR MDU UNIT - MDU-SSC

MDU-SSC

Available

7.4.3.- 安装和维护惯例

MDU-SSC

MDU设备的软件、传感器和控制

The aim of the vibration analyzer is to assess the machine diagnosis testing with the different kits related to the vibration interface technology.The system consists of two acceleration sensors, a speed sensor, a measuring amplifier with...

MDU-BLU

Available

7.4.3.- 安装和维护惯例

MDU-BLU

制动和负载设备

The Break and Load Unit, "MDU-BLU", of EDIBON is a magnetic particle brake, a display unit and an electrical control. It is possible to precisely adjust the braking moment. The excitation current is used as a measurement of the braking moment and...

MDU-SES

Available

7.4.3.- 安装和维护惯例

MDU-SES

弹性树套装

The Set of Elastic Shaft, "MDU-SES", of EDIBON allows to study the behavior of an elastic rotor subjected to imbalance and balance of elastic rotors in operation. It is possible to study the resonance and the phenomena occurred in subcritical and...

SET OF ROTATING SHAFT WITH CRANK - MDU-SRS

MDU-SRS

Available

7.4.3.- 安装和维护惯例

MDU-SRS

裂纹轴套装

It is important that fissures resulting from material fatigue in rotating machines are detected in good time before the breakage occurs, which usually leads to fatal consequences.The Set of Rotating Shaft with Crank, "MDU-SRS", consists of two...

SET OF ROLLER BEARINGS WITH FAULTS - MDU-SRBF

MDU-SRBF

Available

7.4.3.- 安装和维护惯例

MDU-SRBF

轴承缺陷套装

To determine the remaining life cycle of a roller bearing and decide on its replacement, the slow variation of the vibration spectrum is analyzed. The spectral distribution will enable to draw accurate conclusions about the type of defect and its...

MDU-SCO

Available

7.4.3.- 安装和维护惯例

MDU-SCO

连接件套装

The Set of Couplings, "MDU-SCO", allows to compare the properties of different couplings such as curved tooth, bolt, flange and claw couplings.The vibrational behavior of the different types of couplings is important to draw conclusions about...

MDU-SBD

Available

7.4.3.- 安装和维护惯例

MDU-SBD

皮带传动套装

The belt drives are noiseless drive devices, have a long life and require little maintenance provided that its design, assembly and adjustment are correct.The Set of Belt Drive, "MDU-SBD", allows to study the conditions that cause vibrations or...

質量

售後服務

如需更多信息，请联系我们

MDU-SCM 连杆机构套装

創新系統

相關新聞

一般說明

所需物品

配套设备

質量

售後服務