Due to the growing awareness of environmental problems, not only individuals but also governments and companies have started to develop activities that tend to preserve or limit the damage to the environment. Thus, some disciplines of the environmental science, such as hydrology, hydrogeology,...
PAHS 土壤水分吸砂设备
創新系統
The Soil Moisture Suction Sand Unit "PAHS" has been designed to study and understand the water retentivity principles in terms of soil suction, the relationship between water retentivity and soil and the derivation of soil moisture characteristic curves.
相關新聞
一般說明
The Soil Moisture Suction Sand Unit "PAHS" has been designed to study and understand the water retentivity principles in terms of soil suction, the relationship between water retentivity and soil and the derivation of soil moisture characteristic curves.
The unit is large enough to permit the simultaneous evaluation of several samples and consists of a suction system and a soils container:
- Suction system: It consists of a water circuit that includes a water tank, a pump, a water jet pump and a pressure gauge (vacuometer). The pump propels water from the water tank and circulates through the water jet pump, which sucks the water of the soils container.
- Soils container: It consists of a cylindrical tank filled with saturated sand (not supplied) that contains three soil sample retaining rings. Inside of the sand the soil samples are placed as well as the humidity meters. A cover is provided to prevent evaporative water loss during the practical exercises and several filters avoid sand transport to the water tank. The soils container includes a pressure gauge (manometer) and an air inlet (pressure inlet) to study of the effect of the atmospheric pressure.
Soil samples placed on the sand are subjected to suction. This suction is applied by means of the water jet pump and the water pump. In order to maintain the suction, a volume water supply is required.
練習和指導練習
手册中包含的指导实践练习
- Understanding of the relationship between water retentivity and soil.
- Understanding of the basic principles of water retentivity in terms of soil suction.
- Study of the effect of the atmospheric pressure.
- Determination of the retentivity of different soil samples.
与该单位进行更多实际操作
- Derivation of the soil moisture characteristic curves for several soils.
可用的类似设备
13.1.- 水文水文地质学
PAHSC
The Computer Controlled Soil Moisture Suction Sand Unit "PAHSC" has been designed to study and understand the water retentivity principles in terms of soil suction, the relationship between water retentivity and soil and the derivation of soil...
配套设备
13.1.- 水文水文地质学
ESHC(4x2m)
Computer Controlled Hydrologic Systems, Rain Simulator and Irrigation Systems Unit (4x2 m)
The main element of the unit is a test tank, which can be filled with sand. Water is supplied to the test tank through different systems: from two flexible separate hoses (simulating water inlets), from an inlet tank (simulating a river), from...
13.1.- 水文水文地质学
ESHC(2x1m)
Computer Controlled Hydrologic Systems, Rain Simulator and Irrigation Systems Unit (2x1 m)
The Computer Controlled Hydrologic Systems, Rain Simulator and Irrigation Systems Unit (2x1 m), "ESHC(2x1m)", is a self-contained unit designed to demonstrate some physical processes found in hydrology and fluvial geomorphology, including:...
13.1.- 水文水文地质学
ESH(2x1m)
Hydrologic Systems, Rain Simulator and Irrigation Systems Unit (2x1 m)
The Hydrological Systems, Rainfall Simulator and Irrigation Systems (2x1 m), "ESH(2x1m)", has been designed by EDIBON to demonstrate some of the physical processes encountered in hydrology and fluvial geomorphology. This includes rainfall...
13.1.- 水文水文地质学
ESHC(2x1m)/S
Computer Controlled Hydrologic Studies Unit
The Computer Controlled Hydrologic Studies Unit, "ESHC(2x1m)/S", has been designed by EDIBON for the advanced study of hydrological processes taking place in ground and fluvial environments. This fully stand-alone unit allows to perform a wide...
13.1.- 水文水文地质学
ESH(2x1m)/S
Hydrologic Studies Unit
The Hydrologic Studies Unit, "ESH(2x1m)/S", has been designed by EDIBON for the advanced study of hydrological processes taking place in ground and fluvial environments. The unit allows to perform a wide variety of experiments focused on the...
13.1.- 水文水文地质学
RHU
Rainfall Hydrographs Unit
The main element of the Rainfall Hydrographs Unit,"RHU", is a tank mounted on a frame. The tank can be filled with sand. There are removable curtains to prevent splashing.There are two square pattern spray nozzles at the top that supply water to...
13.1.- 水文水文地质学
RSESC
计算机控制的雨水模拟装置
The Computer Controlled Rainfall Simulator for Soil Erosion Studies, "RSESC", consists of a metal frame that can be placed directly on the ground for direct studies or used with its different accessories for laboratory tests.The entire frame is...
13.1.- 水文水文地质学
RSES
Rainfall Simulator for Soil Erosion Studies
The Rainfall Simulator for Soil Erosion Studies, "RSES", consists of a metal frame that can be placed directly on the ground for direct field studies or used with its various accessories for laboratory tests. The whole structure is covered with a...
13.1.- 水文水文地质学
RFS
River Flow Simulator
The River Flow Simulator, "RFS", designed by EDIBON, allows the simulation and study of the river features, included the flow and solid bed load motion.The main element is a rectangular tank made of stainless steel supported on a metal beam frame,...
13.1.- 水文水文地质学
HVFLM-2
移动床和流量可视化单元 (工作区: 2000x610 mm)
The Mobile Bed and Flow Visualization Unit (working section: 2000x610 mm), "HVFLM-2", may be used mainly in two study fields. The first one is the investigation of mobile beds, which are related to water courses and civil engineering structures....
13.1.- 水文水文地质学
HVFLM-4
移动床和流量可视化单元 (工作区: 4000x610 mm)
The Mobile Bed and Flow Visualization Unit (working section: 4000 x 610 mm), "HVFLM-4", may be used mainly in two study fields. The first one is the investigation of mobile beds, which are related to water courses and civil engineering structures....
13.1.- 水文水文地质学
CAS
泥沙移动示范流道
The Sediment Transport Demonstration Channel, "CAS", designed by EDIBON, consist of an inclinable channel mounted on a base plate, supported by two supports, with a discharge tank and recirculating pump. This tank is in the Basic Hydraulic Feed...