Are you a teacher or do you work as an engineering researcher? EDIBON offers courses for teachers and #research staff. Take a look at the course Basic Mechanics and learn about #forces and vectors. #DiscoverEdibon #Engineering.
MELH 学习胡克定律的设备
創新系統
The Unit for studying Hooke's Law, "MELH", demonstrates the application of Hooke's Law and allows the visualization of the deformation of tension springs under load and the performance of oscillation experiments on a spring – mass system.
相關新聞
一般說明
The Unit for studying Hooke's Law, "MELH", demonstrates the application of Hooke's Law and allows the visualization of the deformation of tension springs under load and the performance of oscillation experiments on a spring – mass system.
The "MELH" unit includes three springs with two different elastic moduli. They will be suspended from their upper end by hooks anchored to the frame.
Load will be applied to the lower end of the spring by hanging masses from it and the rules included in the unit will be used to read directly the deformation generated in the springs. Thus, the elastic modulus of each spring is obtained by applying Hooke's law.
The unit allows the performance of studies in series and in parallel by combining the springs provided.
練習和指導練習
手册中包含的指导实践练习
- Demonstration of Hooke's law.
- Research on the proportionality of force applied and elongation of the spring.
- Determination of the spring constant.
- Study of the arrangement in series of two tension springs.
- Study of the arrangement in parallel of two tension springs.
- Research on the influence of the spring constant on the oscillation frequency of a mass-spring system.
配套设备
7.1.3.- 静态和动态
MEMB2
The Unit for studying Equilibrium of Moments on a Two Arm Lever,"MEMB2", allows to study the fundamentals of the equilibrium of moments and the application of the law of levers on a two-arm lever.A pivoted beam in the extreme of a vertical support...
7.1.3.- 静态和动态
MBMRC
Computer Controlled Balance of Reciprocating Masses Unit
The Computer Controlled Balance of Reciprocating Masses Unit, "MBMRC", is a bench-mounting unit that allows to investigate and examine the free masses and moments of a reciprocating engine with a single cylinder, with two cylinders or with four...
7.1.3.- 静态和动态
MEAL
Cam Analysis Unit
The Cam Analysis Unit "MEAL" allows to observe the effect of the profile of a cam, the study of the displacement, velocity and acceleration profiles of the cam and the identification of the factors that can modify the dynamics of the cam. This...
7.1.3.- 静态和动态
MDFC
Coriolis Force Demonstration Unit
The Coriolis Force Demonstration Unit, "MDFC", is used to observe the deflection of a jet of water generated by a pump attached to a rotating arm that rotates to different speeds in a horizontal plane. An electronically controlled motor rotates...
7.1.3.- 静态和动态
MFCE
Centrifugal Force Unit
The Centrifugal Force Unit, "MFCE", is used to demonstrate the relationship between centrifugal force, rotational speed, mass of a rotating body and distance from the axis. The unit consists of a vertical axis of rotation and a rotating arm....
7.1.3.- 静态和动态
MGI
Gyroscope
The Gyroscope, "MGI", allows the experimental demonstration of the different rotation modes of a gyroscope and the moments generated by the gyroscopic effect. The rotor of the electric motor (rotating motor) shares a horizontally supported shaft...
7.1.3.- 静态和动态
CGU
Centrifugal Governor Unit
The Centrifugal Governor Unit, "CGU", has been designed to study the operating mode of different centrifugal governors, including three interchangeable governors: Porter governor, Hartnell governor and Proell governor.Interchangeable governors...
7.1.3.- 静态和动态
MED
Static and Dynamic Balancing Unit
The Static and Dynamic Balancing Unit, "MED", developed by EDIBON is a unit to study and analyze the oscillations and vibrations and how to eliminate or diminish them.Basically, the unit is formed by a shaft mounted on bearings. The shaft is...
7.1.3.- 静态和动态
MES
Simple Balancing Unit
The Simple Balancing Unit, "MES", developed by EDIBON is a unit to study and analyze the oscillations and vibrations and how to eliminate or diminish them.Basically, the unit is formed by a shaft mounted on bearings. The shaft is coupled by pulley...
7.1.3.- 静态和动态
MIF
Inertia Flywheel Unit
The Inertia Flywheel Unit, "MIF", consists of an inertia disc with a rotation shaft at the center of the disc.The shaft is supported at two points by bearings.A cord is attached by one of the ends to the shaft and wound around it. At the other end...
7.1.3.- 静态和动态
MRYE1
Wheel and Axle Unit
The Wheel and Axle Unit, "MRYE1", is a unit which allows to investigate the mechanics of a simple wheel and axle machine and to demonstrate the laws of the formation of equilibrium of moments in static systems.Two pulleys with different diameter...
7.1.3.- 静态和动态
MRYE2
Wheel and Differential Axle Unit
The Wheel and Differential Axle Unit, "MRYE2", is a unit that allows for investigating the mechanics of a wheel and differential axle mechanism and demonstrating the force reduction on a differential pulley block.A wheel, consisting of a pulley...