Amerika

PDF

Customer:
UNIVERSIDAD CENTRAL DEL ESTE (UCE), SAN PEDRO DE MACORÍS

Department:
Department of Environmental Management

Description:
Installation and Training of units belonging to the areas of Chemical Engineering, Food & Water Technologies and Environment

PDF

Customer:
ESCUELA POLITÉCNICA NACIONAL (EPN), QUITO

Department:
Laboratory of Thermodynamics

Description:
Installation and Training of units belonging to the areas of Mechanics and Thermodynamics

Customer:
UNIVERSIDAD CENTROAMERICANA JOSÉ SIMEÓN CAÑAS, UCA

Departament:
CHEMICAL ENGINEERING DEPARTMENT

Description:
We have had the pleasure to carry out an installation at the Universidad Centroamericana José Simeón Cañas (UCA). We have trained the professors and installed our Computer Controlled Continuous Distillation Unit "UDCC" that is a powerful laboratory tool for the study of variables that affect the distillation process and our complete range of Computer Controlled Chemical Reactors "QRC" which has been designed for the study and comparison of different types of chemical reactors

Customer:
STATE UNIVERSITY OF HAITI, UEH

Department:
FLUID MECHANICS DEPARTMENT

Description:
We have installed a full laboratory in the Fluid Mechanics Department. The laboratory include now the complete Flow Channel "CFC" with all the accesories, our Sedimentation Study Unit “ESED”, the Hydrologic Systems, Rain Simulator and Irrigation Systems Unit (2x1 m) “ESH(2x1m)”, the Computer Controlled Drainage and Seepage Tank “PDFDC”, the Computer Controlled Water Treatment Plant “PPTAC/1” and the Sedimentation, Precipitation and Flocculation Unit “SPFB”, among others. It was a pleasure for our engineers to complete this amazing and huge installation

Customer:
MACPHAIL SCHOOL OF ENERGY (SAIT)

Description:
Installation and Training of units belonging to the Fluid Mechanics

Description:
During our stay in Colombia, EDIBON carried out another setting-up. This time, it was at Universidad Industrial de Santander, where we installed the PEM Fuel Cell unit, the Electrolyzer and the Photovoltaic Solar Energy Modular Trainer. In this way, students will be able to continue their training in the study of renewable energies.

Customer:
UNIVERSIDAD DE SANTANDER

Department:
Energy and Electricity Department

Description:
This time, the whole team moved to Universidad de Santander, Colombia, to install the PEM Fuel Cell Unit and Electrolyzer unit. We only hope to be able to contribute to the continuous learning of the students and teachers of the department of energy and electricity.

PDF

Customer:
UNIVERSIDAD DEL ATLÁNTICO

Department:
Department of Engineering

Description:
Installation and Training of units.

Client:
UNIVERSIDAD DE ORIENTE

Description:
Our engineers have traveled to Cuba and they have successfully completed the installation at the Universidad de Oriente. Now, students and professors will be able to continue learning with the Steam Turbine, “TTVC”, the Wind Energy Unit, “EEE”, among others.

Client:
UNIVERSIDAD TECNOLÓGICA DE LA HABANA JOSÉ ANTONIO ECHEVERRÍA, CUJAE

Description:
On this occasion, our engineers have moved to Universidad Tecnológica de La Habana José Antonio Echeverría (CUJAE), Cuba, to install the PEM Fuel Cell Unit, “EC5B”, among others.

Client:
EMPRESA DE FUENTES RENOVABLES DE ENERGÍA, EMFRE

Description:
We have successfully completed the installation of a comprehensive renewable energy center, equipped with the most advanced technology for training and development in clean energy. This center is a benchmark in innovation, designed to lead the transition towards a sustainable and efficient future.

PDF

Client:
UNIVERSIDAD TECNOLÓGICA LA SALLE, ULSA

Department:
RENEWABLE ENERGY LABORATORY

Description:
This time, we went to Nicaragua to complete the renewable energy laboratory. The students will be learning with equipment such as the Energy Power Plants Application, “AEL-EPP”, which studies the basic operating principles of power plants, as well as the substations responsible for receiving the generated energy. Additionally, the Analysis of Three-phase Power Lines Application, “AEL-TI-01”, and the Distribution Transformer with Motor Regulation Application, “AEL-TI-02”, will immediately assist engineers in their training and provide comprehensive knowledge of power transmission.

PDF

Customer:
UNIVERSIDAD TECNOLÓGICA DE PANAMÁ, PANAMÁ

Department:
Faculty of Mechanical Engineering

Description:
Installation and Training of units belonging to the areas of Mechanics, Fluid Mechanics and Thermodynamics

Customer:
UNIVERSIDAD TECNOLÓGICA DEL PERÚ, UTP

Description:
Now, students and professors have the possibility of learning all the things related with Fluid Mechanics with our Flow Channel (section: 300 x 450 mm), length: 2.5 m "CFG300/2.5" and all the accessories included. Channels carry out an important role in engineering, covering in a broad sense many liquids flow situations

Customer:
UNIVERSIDAD PERUANA DE CIENCIAS APLICADAS, UPC

Department:
Environmental Department

Description:
We are grateful for the trust of UPC - Universidad Peruana de Ciencias Aplicadas that has allowed us to install our Computer Controlled Biogas Process Unit “EBGC”, the Computer Controlled Aerobic Digester “PDAC”, the Flocculation Test Unit “PEF” (among others) to help future engineers to understand in a simpler way everything related to environmental engineering

Customer:
UNIVERSIDAD NACIONAL PEDRO RUIZ GALLO, UNPRG

Department:
Faculty of Mechanical and Electrical Engineering

Description:
Such a pleasure to equip the mechanical and electrical engineering faculty at Universidad Nacional Pedro Ruiz Gallo, with the installation of the Computer Controlled Organic RankineCycle Unit “TORC” and the Computer Controlled Two -Shaft Gas Turbine “TGDEC” so that students and researchers can continue doing their great work with our units

PDF

Customer:
UNIVERSIDAD ANDINA DEL CUSCO, UAC

Department:
Faculty of Engineering

Description:
The Faculty of Engineering and Architecture (UAC), through the Professional School of Industrial Engineering, managed to acquire the SCADA-NET system, a network process control module of the Spanish company EDIBON, which has 20 computers connected to several units and designed to strengthen the practical skills of students. In 2013, Universidad Andina del Cusco, in its effort to innovate education in practical matters, acquired the first module of control of process variables, for the exclusive use of the teacher and since that time worked on the expansion of the network and the implementation of environments for the opening of what from today will be a laboratory for the control of network processes, which can be used by all students of the professional schools of the faculty

PDF

Customer:
UNIVERSIDAD NACIONAL DE INGENIERÍA, UNI

Department:
Laboratory of Chemical Engineering

Description:
Installation and Training of units belonging to the area of Chemical Engineering, as well as the EDIBON SCADA Net System (ESN)

PDF

Customer:
UNIVERSIDAD ALAS PERUANAS, LIMA

Department:
Schools of Environmental, Electronic & Telecommunications Engineering

Description:
Installation and Training of our Computer Controlled Three Dimensions (3D) Physics Complete Unit

PDF

Customer:
UNIVERSIDAD NACIONAL MAYOR DE SAN MARCOS, UNMSM

Department:
Department of Analysis and Process Design

Description:
Very glad to meet our colleagues from Universidad de San Marcos during the setting-up of our equipment at the chemical engineering Faculty

Customer:
UNIVERSIDAD ANDINA DEL CUSCO, UAC

Description:
Installation and Training of units belonging to several areas: mechanical, fluid mechanics, physics, etc.

PDF

Customer:
UNIVERSIDAD NACIONAL SAN ANTONIO ABAD DEL CUSCO, CUSCO

Department:
Department of Physics

Description:
Installation and Training of units belonging to the Physics area

Customer:
THE UNIVERSITY OF TRINIDAD AND TOBAGO (UTT)

Description:
Our engineers have travelled to the University of Trinidad and Tobago (UTT) and they have successfully completed a huge installation. Now, students and professors will be able to continue learning with Sediment Transport Demonstration Channel “CAS”, a complete Computer Controlled Flow Channel, among others

PDF

Customer:
THE UNIVERSITY OF THE WEST INDIES AT ST. AUGUSTINE, ST. AUGUSTINE

Department:
Department of Civil & Environmental Engineering

Description:
Installation and Training of units belonging to the area of Fluid Mechanics

Customer:
UNIVERSIDAD TECNOLÓGICA DEL URUGUAY

Department:
Engineering in Irrigation, Drainage and Effluent Management Systems Department

Description:
Our engineers carried out a successful installation at the University of Technology UTEC - Universidad de Ingeniería y Tecnología (Uruguay). Now, students and professors from the Department of Irrigation Systems Engineering, Drainage and Effluent Management will continue studying and researching with the Computer Controlled Fluid Friction in Pipes, with Hydraulics Bench “AFCT” and the Computer Controlled Flow Channels, “CFC”. Visit our website and explore all our equipment.

PDF

Customer:
UNIVERSIDAD TECNOLÓGICA DEL URUGUAY (UTEC), COLONIA

Department:
Degree in Dairy Science and Technology

Description:
Installation and Training of units belonging to the area of Chemical Engineering

Client:
STATE TECHNICAL COLLEGE OF MISSOURI, STATE TECH

Description:
We have successfully installed our Advanced Mechanical, Electrical, and Smart Grid Power Systems (Utilities), “APS12”, which is recognized as one of the most sophisticated and comprehensive power systems on the market. Unlike simulators, this is a real, fully operational system designed to offer hands-on experience and in-depth learning opportunities.

Client:
SOUTHERN ADVENTIST UNIVERSITY

Description:
We have installed our Computer Controlled Series/Parallel Pumps Bench, “PBSPC”. Our mission is to strengthen engineering education, and this collaboration brings us one step closer to that goal. Southern's students now have access to the latest technologies and equipment that will allow them to gain quality hands-on experience.

Client:
SOUTHERN UNIVERSITY SHREVEPORT, SUSLA

Description:
We are proud to present the installation of our Pipes, Valves, and Fittings Assembly Unit, featuring the advanced application “PVFA/AA”. This cutting-edge unit provides invaluable hands-on experience in assembling and understanding complex piping systems. Additionally, we have installed our state-of-the-art Computer Controlled Horizontal Three-Phase Separator “HTSC”, a powerful trainer for studying the critical aspects of gravity separation. This unit enables in-depth analysis of how viscosity, flow rate, and density differences impact the efficiency of separation processes, offering students and researchers an unparalleled opportunity to explore these fundamental principles.

Client:
UNIVERSIDAD DE PUERTO RICO

Department:
LABORATORY OF CHEMISTRY AND UNIT OPERATIONS

Description:
We have successfully installed the Computer Controlled Heat Transfer Series “TSTCC”, the Computer Controlled Heat Exchangers Training System “TICC”, the Computer Controlled Bench Top Cooling Tower “TTEC” and the IIOT Local/Remote Control and Monitoring Expansion with HMI, allowing comprehensive control from both PLC and remote access. With this advanced equipment, we aim to provide chemistry students with hands-on, practical understanding of key concepts, thereby enhancing their learning experience through real-world applications.

Client:
RECINTO UNIVERSITARIO DE MAYAGÜEZ, UPRM

Departament:
CHEMICAL ENGINEEERING DEPARTMENT

Description:
We have successfully installed the Computer Controlled Solar Thermal Energy Basic Equipment “MINI-EESTC” and the Computer Controlled Discontinuous Enzyme Reactor “QREC.” This advanced equipment is designed to enhance hands-on learning and provide in-depth insights into solar energy systems and biochemical processes, respectively.

Client:
TARLETON STATE UNIVERSITY

Department:
ENGINEERING AND COMPUTER SCIENCE DEPARTMENT

Description:
We have carried out the installation of a Computer Controlled Axial Flow Gas Turbine/ Jet Engine “TGFAC” unit in the department of Engineering and Computer Science at Tarleton University.

Client:
SOUTH MOUNTAIN COMMUNITY COLLEGE, MARICOPA

Description:
We have moved to the engineering lab of South Mountain Community College (MARICOPA) to install our Tensile Tester Unit “MTTU”, the Simple Harmonic Motion Unit “MSHU”, the Unit for studying Forces in a Jib Crane “MFPG”, the Unit for studying Deformation of Trusses “MFCS3”, the Unit for Studying Forces in a Simple Bar Structure “MFBS” and the Slotted Link Mechanism “MBM1”

Client:
TRIDENT TECHNICAL COLLEGE, TTC

Description:
Students and professors at the college now have the opportunity to further their studies with the comprehensive Flow, Level, Pressure, and Temperature Regulation for Process Control lab, “FLPTU.” This full lab setup allows them to conduct applied research, deepen their understanding of the fundamentals of process control systems, explore the behavior and configuration of the devices involved, and design effective control strategies.

Client:
AUBURN UNIVERSITY

Departament:
CHEMICAL ENGINEERING DEPARTMENT

Description:
We have successfully installed our Liquid-Liquid Extraction Unit “UELL,” Double Effect Falling Film Evaporator “EDPDC,” Double Effect Rising Film Evaporator “EDPAB,” and Refrigeration Cycle Demonstration Unit “TCRB.” With these advanced systems in place, the institution is now equipped to elevate their teaching and research capabilities to new levels.

Client:
TENNESSEE TECH UNIVERSITY, TNTECH

Departament:
CHEMICAL ENGINEERING DEPARTMENT

Description:
We installed our Computer Controlled Heat Exchanger Training System, “TICC”, along with all the equipment related to Heat Exchangers. Additionally, we installed our Local/Remote IIoT Control and Monitoring with HMI, “PLCHMI”, to control all of them remotely.

Client:
UNIVERSITY OF SOUTH FLORIDA, USF

Departament:
DEPARTAMENT OF CHEMICAL AND BIOMEDICAL ENGINEERING

Description:
We have successfully completed the installation of our Base Service Unit, “TIUS,” along with the Shell & Tube Heat Exchanger, “TICT.” In addition, the Computer Controlled Fixed and Fluidized Bed Unit, “LFCC,” has also been correctly installed.

Our mission is to enhance engineering education, and this collaboration brings us one step closer to achieving that goal. Students now have access to cutting-edge technologies and equipment, providing them with valuable hands-on experience.

Client:
SLIPPERY ROCK UNIVERISTY, SRU

Departament:
PHYSICS & ENGINEERING DEPARTMENT

Description:
We have installed a large laboratory dedicated to Fluid Mechanics, “LIFLUBA,” which includes the following: Fluid Properties, “FME35,” Flow Visualization in Channels, “FME09,” Surface Pressure, “FME08,” Osborne Reynolds' Demonstration, “FME06,” Orifice Discharge, “FME04,” Bernoulli's Theorem Demonstration, “FME03,” Flow over Weirs, “FME02,” and a complete Data Acquisition System and Sensors for all of them. Additionally, we have installed the Suspension Bridge Unit, “MVS,” the Beam Deflection Unit, “MFV,” and the Computer Controlled Heat Transfer Series, “TSTC.” It’s always a pleasure to work on projects like this!

Client:
UNIVERSITY OF RHODE ISLAND

Department:
DEPT. OF CHEMICAL ENGINEERING

Description:
We have completed the installation of the Base-Service Unit “QRUBI,” the Computer Controlled Stirred Tank Reactors in Series for QRC “QRSC,” and the Computer Controlled Batch Reactor for QRC “QRDC.” We hope that this equipment will help students in the Chemical Engineering department easily grasp the concepts and operations of chemical reactors.

Client:
NORTH CAROLINA AGRICULTURAL AND TECHNICAL STATE UNIVERSITY

Department:
MECHANICAL ENGINEERING DEPARTMENT

Description:
As electricity consumption continues to rise and awareness of the adverse environmental impact of fossil fuels grows, investing in clean and sustainable energy becomes increasingly necessary. Students at North Carolina Agricultural and Technical State University can now further their studies in marine energy with the Computer Controlled Waves Energy Unit, “EOMC.” It's been an excellent setup!

Client:
THE UNIVERSITY OF ALABAMA IN HUNTSVILLE

Department:
DEPARTMENT OF CHEMICAL ENGINEERING

Description:
We continue to expand our efforts in supporting universities with advanced training. This time, we moved to The University of Alabama in Huntsville. Here, students can explore and learn about the variables that affect the distillation process using the “UDCC,” Computer Controlled Continuous Distillation Unit. It was a pleasure to contribute!

PDF

Client:
UNIVERSITY OF TOLEDO

Description:
We have successfully completed the installation and training sessions for a range of advanced equipment in the Energy sector. These installations include state-of-the-art equipment designed to enhance both the educational and research capabilities in energy studies. Through comprehensive training, faculty and students are now equipped with the knowledge and skills to fully utilize these units, fostering a deeper understanding of energy systems and their applications.

PDF

Client:
THE UNIVERSITY OF UTAH

Department:
DEPARTMENT OF METALLURGICAL ENGINEERING

Description:
We have successfully completed the installation and training of advanced equipment in the field of Energy. These equipment are designed to enhance both the educational and research capabilities in energy studies.

PDF

Client:
WASHINGTON UNIVERSITY IN ST. LOUIS

Department:
DEPARTMENT OF MECHANICAL ENGINEERING & MATERIALS SCIENCE

Description:
We have installed and provided training on equipment focused on Fluid Mechanics and Thermodynamics. These equipment aim to give students practical insights and a deeper grasp of the foundational theories in these important areas.

PDF

Client:
TUSKEGEE UNIVERSITY

Department:
DEPARTMENT OF MATERIAL SCIENCE & ENGINEERING

Description:
We have successfully completed the installation and training of advanced equipment within the field of Mechanics. These state-of-the-art equipment are designed to provide students and researchers with hands-on experience and a deeper understanding of mechanical principles. The training sessions ensure that both faculty and students are fully equipped to utilize these units for educational and research purposes, enhancing their knowledge and skills in mechanical engineering.

PDF

Client:
IVY TECH COMMUNITY COLLEGE

Description:
Installation and training of equipment in the field of Mechanics. This equipment is designed to enrich the learning experience by offering practical, hands-on opportunities and fostering a deeper understanding of mechanical concepts.

PDF

Client:
SOUTHERN ARKANSAS UNIVERSITY,MAGNOLIA

Department:
DEPARTMENT OF BIOCHEMISTRY, CHEMISTRY & PHYSICS

Description:
Setup and instructional sessions for specialized equipment in the field of Mechanics. These systems are implemented to provide students with hands-on experience and to deepen their comprehension of mechanical engineering principles.

PDF

Client:
IOWA STATE UNIVERSITY

Department:
DEPARTMENT OF CHEMICAL & BIOLOGICAL ENGINEERING

Description:
Installation and training of equipment focused on Thermodynamics. These installations are aimed at providing students with practical experience and a deeper understanding of thermodynamic processes and principles.

PDF

Client:
AMARILLO COLLEGE

Department:
FACULTY OF SCIENCE & ENGINEERING

Description:
Installation and training on advanced equipment in the field of Energy. This equipment is designed to facilitate hands-on education and deepen knowledge in energy systems and technologies.

PDF

Client:
ALABAMA A&M UNIVERSITY

Department:
DEPARTMENT OF MECHANICAL & CIVIL ENGINEERING

Description:
We have successfully completed the installation and training of advanced equipment in the field of Energy. This state-of-the-art equipment is specifically designed to offer hands-on experience, enabling users to gain a deeper understanding of complex energy systems and cutting-edge technologies. Through practical application, students and researchers can explore the intricacies of energy production, distribution, and management, thereby enhancing their skills and knowledge in this critical sector.

PDF

Client:
THE COLLEGE OF NEW JERSEY, TCNJ

Department:
DEPARTMENT OF MECHANICAL ENGINEERING

Description:
We have completed the installation and training of specialized equipment in the field of Fluid Mechanics. This advanced equipment is designed to provide hands-on experience and deepen the understanding of fluid dynamics, helping students and researchers explore the behavior and characteristics of fluids in various engineering applications.

PDF

Client:
LOUISIANA STATE UNIVERSITY, LSU

Department:
DEPARTMENT OF MECHANICAL AND INDUSTRIAL ENGINEERING

Description:
We have completed the installation and training of specialized equipment in the field of Thermodynamics. This advanced equipment is designed to provide hands-on experience and enhance the understanding of thermodynamic principles, enabling students and researchers to explore heat transfer, energy conversion, and other critical aspects of thermodynamics in real-world applications.

PDF

Client:
CALIFORNIA STATE UNIVERSITY, BAKERSFIELD

Department:
DEPARTMENT OF PHYSICS & ENGINEERING

Description:
Setup and training of equipment in Fluid Mechanics. These equipment are designed to enhance practical understanding and provide in-depth insights into the principles governing fluid behavior.

PDF

Client:
FLORIDA ATLANTIC UNIVERSITY, FAU

Department:
DEPARTMENT OF CIVIL, ENVIRONMENTAL & GEOMATICS ENGINEERING

Description:
Installation and training of equipment focused on Environmental studies. These trainers are intended to enhance practical knowledge and provide deeper insights into environmental systems and their management.

PDF

Client:
UNIVERSITY OF NORTH ALABAMA

Department:
Department of Technology of Engineering

Description:
Enjoying the time at University of North Alabama and happy with the setting up of some of our equipment. On this occasion we have installed equipment for chemistry and process control fields including the Computer Controlled Continuous Distillation Unit “UDCC”, the Computer Controlled Liquid-Liquid Extraction Unit “UELLC”, the Base-Service Unit “QRUBI” for chemical reactors and the Computer Controlled ProcessControl System (with speed controller) among others. Let's hope you enjoy it!

Client:
WAYNE STATE UNIVERSITY

Description:
We have successfully completed the installation and comprehensive training of advanced equipment in the fields of fluid mechanics and mechanical engineering. This state-of-the-art equipment is designed to provide students and researchers with hands-on experience, enabling them to explore the complex principles of fluid dynamics and mechanical systems. By incorporating these cutting-edge tools into their learning, participants can gain a deeper understanding of the theoretical and practical aspects of engineering, paving the way for innovation and excellence in their future endeavors.

Client:
KENNESAW STATE UNIVERSITY

Description:
Installation and training of equipment specializing in Thermodynamics, Thermotechnics and Fluid Mechanics. These equipment are designed to enhance practical learning and provide a deeper understanding of the core principles in these critical areas of study.