Today we are at the beginning of a new era, named ‘Industrie 4.0’. Let´s explain a little further the concept "Industrie 4.0"!
WIT-KNX-BC KNX를 사용한 블라인드 배선 실습
혁신적인 시스템
The WIT-KNX-BC is a unit designed to facilitate the study and comprehension of KNX wiring practices specifically tailored for the control of shutters or blinds. This unit serves as a valuable resource for educational and professional purposes, providing practical experience and insights into the wiring techniques, programming and commissioning associated with KNX technology in the context of shutter or blind control systems.
관련 뉴스
일반적인 설명
The WIT-KNX-BC is a unit designed to facilitate the study and comprehension of KNX wiring practices specifically tailored for the control of shutters or blinds. This unit serves as a valuable resource for educational and professional purposes, providing practical experience and insights into the wiring techniques, programming and commissioning associated with KNX technology in the context of shutter or blind control systems.
Key features of the WIT-KNX-BC may include:
- Hands-On Learning: The unit allows users to engage in hands-on exercises related to KNX wiring practices, focusing on the specific requirements of shutter or blind control scenarios.
- Simulation of Shutter Control Scenarios: Users can simulate and experiment with various scenarios involving the control of shutters or blinds, gaining an understanding of how KNX technology facilitates the integration and automation of such systems in smart buildings.
- Practical Application of KNX Wiring: The unit provides a platform for practical application, enabling users to connect and configure KNX devices for shutter control in a controlled environment. This practical approach enhances the learning experience.
- Comprehensive Documentation: Accompanying documentation offers detailed information on KNX wiring practices for shutter control, ensuring that users have access to comprehensive guidance and instructions for effective learning.
- Compatibility: The unit is likely compatible with standard KNX devices and protocols used in shutter or blind control systems, ensuring seamless integration into KNX-based educational and professional environments.
연습 및 가이드
매뉴얼에 포함 된 가이드 실기 연습
- Basic Integration of the Blinds Control System:
- Connection of the electrical distribution box for KNX devices in the blind control system.
- Application of wiring techniques to ensure a safe installation.
- Connection of the KNX Room Controller:
- Integration of the KNX room controller for centralized blind control.
- Configuration of functions and programming of scenarios.
- Connection of the KNX Binary Input Module:
- Connection and integration of the KNX binary input module to detect the status of the blinds.
- Programming of actions according to the detected status.
- Connection of KNX Binary Output Module for Blinds Control:
- Connection and configuration of the KNX binary output module for the effective control of the blinds.
- Adjustment of response times and configuration of positions.
- Use of KNX brightness sensors:
- Connection and integration of KNX brightness sensors for automatic adjustment of blinds according to lighting.
- Programming of thresholds and conditions.
- Connection of Push Button Module for Manual Interaction:
- Integration of KNX pushbutton modules to allow manual interaction with the blinds.
- Programming of up, down and stop functions.
- Shutter Motor: Connection and Integration:
- Connection and programming of the shutter motor.
- Evaluation of system performance under various conditions.
ETS Project Creation and Topology Definition:
- Creation of a New Project in ETS:
- Development of a new project from scratch with ETS software.
- Definition of general characteristics and establishment of the basic topology of the KNX system.
- Definition of the Bus Topology:
- Configuration of the KNX bus topology.
- Identification of devices and establishment of physical addresses.
- Application of good design practices.
- Physical Address Assignment:
- Assignment of physical addresses to KNX devices in the project.
- Follow-up of addressing standards and recommendations.
- Topology Verification:
- Verification of configuration consistency.
- Compliance with KNX system requirements.
KNX Device Diagnostics:
- Use of Diagnostic Tools:
- Use of diagnostic tools in the ETS software to verify communication and status of KNX devices.
- Communication Testing:
- Performing communication tests between KNX devices and the bus.
- Identification and resolution of possible connection problems.
- Telegram Analysis:
- Analysis of telegrams sent and received by KNX devices.
- Identification of possible errors or interferences in the network.
- Error Diagnostics:
- Diagnosis and troubleshooting of configuration or connection errors in KNX devices.
- Use of diagnostic tools available in the ETS software.
- Event Logging:
- Use of event logging functions to monitor and analyze the behavior of KNX devices under different operating conditions.
보완 장비
4.4.3.- 설치 및 유지 관리 관행
WIT-MDRV
산업용 AC 및 DC 모터 컨트롤러 전기 배선 실습
The Wiring Installation Training, AC and DC Motor Drivess application, "WIT-MDRV", has been designed by EDIBON for the formation at professional-practical level in the field of electrical motors controllers.This application will equip future...
4.4.3.- 설치 및 유지 관리 관행
WIT-IEM
산업용 AC 및 DC 전동기 전기 배선 실습
The Wiring Installation Training for AC and DC Industrial Electrical Motors, "WIT-IEM", has been designed by EDIBON for the formation at professional-practical level in the field of the installation, wiring and commissioning of industrial...
4.4.3.- 설치 및 유지 관리 관행
WIT-WPS
풍력 에너지 시스템 전기 배선 실습
The unit of Wiring Installation Training for Wind Power Systems, "WIT-WPS", has been designed by EDIBON for formation at a professional-practical level in the field of installations, wiring, and commissioning of wind power energy systems.This unit...
4.4.3.- 설치 및 유지 관리 관행
WIT-IEP
산업용 전기 보호장치 전기 배선 실습
The Wiring Installation Training, Industrial Electrical Protections application, "WIT-IEP", has been designed by EDIBON for the formation at professional-practical level in the field of the installations, wiring and testing of electrical...
4.4.3.- 설치 및 유지 관리 관행
WIT-ILI
산업용 조명 설비 전기 배선 실습
The Wiring Installation Training, Industrial Lighting Installations application, "WIT-ILI", has been designed by EDIBON for the formation at professional-practical level in the field of the installations, wiring and testing of the different...
4.4.3.- 설치 및 유지 관리 관행
WIT-ISG
산업용 신호 요소 전기 배선 실습
The Wiring Installation Training, Industrial Signalling Elements application, "WIT-ISG", has been designed by Edibon for the formation at professional-practical level in the field of the installations, wiring and testing of the signaling...
4.4.3.- 설치 및 유지 관리 관행
WIT-PFC
전력인자 보정 장치 전기 배선 실습
The Wiring Installation Training, Power Factor Correction Devices application, "WIT-PFC", has been designed by Edibon for the formation at professional-practical level in the field of the installations, wiring and testing of existing power factor...
4.4.3.- 설치 및 유지 관리 관행
WIT-ISE
산업용 스위치 요소 전기 배선 실습
The Wiring Installation Training, Industrial Switching Elements application, "WIT-ISE", has been designed by Edibon for the students formation at a professional-practical level in the field of the installation, wiring and testing of industrial...
4.4.3.- 설치 및 유지 관리 관행
WIT-EIB
건물 전기 배선 실습
The Wiring Installation Training, Electrical Installations in Buildings application, "WIT-EIB", has been designed by EDIBON for the students formation at a professional-practical level in the field of the installation, wiring and testing of...
4.4.3.- 설치 및 유지 관리 관행
WIT-EPH
자동 비상벨 전기 배선 실습
The application of Wiring Installation Training for Entryphones, "WIT-EPH", has been designed by EDIBON for the students formation at a proffessional-practical level in the field of the installation, wiring and testing of entryphones electrical...
4.4.3.- 설치 및 유지 관리 관행
WIT-MCB
건물 네트워크 연결 및 전력계 전기 배선 실습
The Wiring Installation Training, Mains Connection and Meters in Buildings application, "WIT-MCB", has been designed by Edibon for the students formation at a proffessional-practical level in the field of the installation, wiring and testing of...