Green hydrogen, also called renewable hydrogen, is hydrogen obtained by using renewable energies in its production. Hydrogen is not a primary energy source but an energy carrier, it requires a chemical process for its production. Green hydrogen is...
AEL-PHIP Применение фотоэлектрических систем в изолированных и параллельных сетях
ИННОВАЦИОННЫЕ СИСТЕМЫ
The Photovoltaic Systems Application in Isolated and Parallel Grids, ''AEL-PHIP'', has been designed to study the operations carried out in photovoltaic power systems which operate isolated from the national energy grid (island operation) or connected to it (parallel operation).
НОВОСТИ ПО ТЕМЕ
ОБЩЕЕ ОПИСАНИЕ
The Photovoltaic Systems Application in Isolated and Parallel Grids, ''AEL-PHIP'', has been designed to study the operations carried out in photovoltaic power systems which operate isolated from the national energy grid (island operation) or connected to it (parallel operation).
This application allows studying the electricity generation by means of photovoltaic panels, through the simulation of different configurations and irradiance conditions, as well as its working in island and parallel to grid operation. To that end, the application also allows proving and understanding the working principles of the different control, regulation and energy storage devices used in real photovoltaic systems.
For these purposes, the ''AEL-PHIP'' application consists of different kits that allow studying several aspects of photovoltaic power plants:
- PHIP-K1. Analysis of Series and Parallel Photovoltaic Modules Kit.
- PHIP-K2. Off-Grid Single-Phase Photovoltaic Systems Kit.
- PHIP-K3. Single-Phase Photovoltaic Systems for Parallel to Grid Operation Kit.
Each kit's didactic purpose is detailed below:
- PHIP-K1. Analysis of Series and Parallel Photovoltaic Modules Kit: This kit consists of a photovoltaic module assembled on a wheeled structure that allows varying the solar module tilt angle. Thus, different roof tilts or typical structures can be simulated, above which these photovoltaic modules are installed. A halogen lamp mounted on an articulated arm is coupled to the mentioned structure for the sun's path simulation. The lamp has a current regulator which allows controlling the incident irradiance on the photovoltaic panel. In order to simulate the solar panel load, the kit includes a variable resistive load. This kit also includes a solar simulation module consisting of three photovoltaic panel simulators, which allow working without the halogen lamp lighting.
Each panel simulator has a regulator for the adjustment of solar irradiance and an analog voltmeter and ammeter for measuring the generation electrical parameters. With this kit, the user will be able to achieve the following learning: daily and yearly curves display, calculation of the photovoltaic modules optimal position, characteristic curves display and photovoltaic modules analysis in parallel, series and other configurations.
- PHIP-K2. Off-Grid Single-Phase Photovoltaic Systems Kit: This kit consists of all the industrial elements needed to study and understand the operation of a real photovoltaic system which operates in island mode. Firstly, it includes an electronic regulator whose purpose is to control the battery charge flow and the inverter input power flow. In addition, this kit includes a sinusoidal wave inverter which transforms the DC current coming from the regulator into single-phase AC current. Both at the regulator and inverter outputs, AC and DC loads are connected respectively, whose purpose is to consume the generated energy.
These loads are AC and DC lamps with different power consumption. This kit also includes a network analyzer for monitoring the system electrical parameters and an analog voltmeter and ammeter with the goal of connecting them to the battery terminals for measuring its operating current and voltage.
With this kit the user will be able to achieve the following learning: installation of photovoltaic systems, measurement of the plant electrical parameters and design and operation of photovoltaic systems isolated from the grid in direct or storage operation.
- PHIP-K3. Single-Phase Photovoltaic Systems for Grid-Parallel Operation Kit: This kit consists of the industrial elements needed to study and understand the operation of the photovoltaic systems which operate in parallel to the grid mode. To that end, it includes an industrial inverter which provides the grid with the generated power. The grid is represented by the power supply included in the base unit. The grid inverter monitors voltage, current and grid impedance for an emergency disconnection in case of deviations or faults that may be dangerous.
This kit also includes a network analyzer for monitoring the electrical parameters of the power flux supplied to the grid.
УПРАЖНЕНИЯ И ПРИМЕРЫ С ИНСТРУКЦИЯМИ
РУКОВОДСТВО ПО ПРАКТИЧЕСКИМ УПРАЖНЕНИЯМ ВКЛЮЧЕНО В РУКОВОДСТВО ПОЛЬЗОВАТЕЛЯ
Practical possibilities with the PHIP-K1 kit:
- Daily and yearly curves display.
- Calculation of the photovoltaic modules optimal position.
- Display of the photovoltaic modules characteristic curves.
- Working of bypass diodes.
- Series and parallel configuration of the photovoltaic modules.
- Analysis of the simulated generation with different configurations of the photovoltaic modules and different solar irradiation conditions.
Practical possibilities with the PHIP-K2 kit:
- Installation of photovoltaic plants.
- Measuring the electrical parameters of the photovoltaic generation system.
- Designing and testing a photovoltaic system isolated from the grid in direct operation.
- Designing and testing a photovoltaic system isolated from the grid in storage operation.
- Designing and testing a photovoltaic system isolated from the grid with AC voltage supply and energy storage.
Practical possibilities with the PHIP-K3 kit:
- Installation of photovoltaic plants.
- Measuring the electrical parameters of the photovoltaic generation system.
- Designing and testing grid-connected (or parallel) photovoltaic systems.
- Determining the industrial inverter efficiency.
- Analysis of the photovoltaic system response to a grid black-out.
БОЛЬШЕ ПРАКТИЧЕСКИХ УПРАЖНЕНИЙ ДЛЯ РАБОТЫ С УСТРОЙСТВОМ
- Several other exercises can be done and designed by the user.
АНАЛОГИ ОБОРУДОВАНИЯ В НАЛИЧИИ
5.3.1.- ФОТОЭЛЕКТРИЧЕСКАЯ СОЛНЕЧНАЯ ЭНЕРГИЯ
EESFB
The sun provides a wide spectrum of solar power. With the exception of the light we see around us every day, the rest of the solar power is invisible. Other parts of the spectrum consist of cosmic beams, gamma rays, x-rays, ultraviolet light,...
5.3.1.- ФОТОЭЛЕКТРИЧЕСКАЯ СОЛНЕЧНАЯ ЭНЕРГИЯ
EESFC
Устройство фотогальванической солнечной энергии, управляемое ПК
The Computer Controlled Photovoltaic Solar Energy Unit, "EESFC", includes equipment that uses the photo-conversion law for the direct conversion of solar radiation into electricity. The absorbed energy is provided by simulated solar radiation,...
5.3.1.- ФОТОЭЛЕКТРИЧЕСКАЯ СОЛНЕЧНАЯ ЭНЕРГИЯ
MINI-EESF
Модульное оборудование для солнечной фотовольтаической энергии (Полная версия)
Photovoltaic Solar Energy Modular Unit (Complete Version), "MINI-EESF", is a laboratory scaled unit designed to study all the parameters involved in the solar radiation direct conversion into electricity. The unit is based on some application...
5.3.1.- ФОТОЭЛЕКТРИЧЕСКАЯ СОЛНЕЧНАЯ ЭНЕРГИЯ
MINI-EESF/M
Модульное устройство фотоэлектрической солнечной энергии (Промежуточная версия)
Photovoltaic Solar Energy Modular Unit (Intermediate Version), "MINI-EESF/M", is a laboratory scaled unit designed to study all the parameters involved in the solar radiation direct conversion into electricity.The unit is based on some application...
5.3.1.- ФОТОЭЛЕКТРИЧЕСКАЯ СОЛНЕЧНАЯ ЭНЕРГИЯ
MINI-EESF/B
Модульное устройство фотоэлектрической солнечной энергии (Базовая версия)
The Photovoltaic Solar Energy Modular Unit (Basic Version), "MINI-EESF/B", is a laboratory scaled unit designed to study all the parameters involved in the solar radiation direct conversion into electricity.The unit is based on some application...
5.3.1.- ФОТОЭЛЕКТРИЧЕСКАЯ СОЛНЕЧНАЯ ЭНЕРГИЯ
AEL-PHVG
Применение фотоэлектрических систем с подключением к сети
The Photovoltaic Application with Connection to Grid, "AEL-PHVG", has been designed by EDIBON to study the energy production by photovoltaic panels and how this energy is injected to the grid.In order to learn about solar energy production, the...
5.3.1.- ФОТОЭЛЕКТРИЧЕСКАЯ СОЛНЕЧНАЯ ЭНЕРГИЯ
AEL-SAPV
Изолированное фотоэлектрическое приложение сети
The Stand-Alone Photovoltaic Application, "AEL-SAPV", has been designed by EDIBON to study the energy production obtained with photovoltaic panels.This application will provide the user with the knowledge and the essential skills about the...
5.3.1.- ФОТОЭЛЕКТРИЧЕСКАЯ СОЛНЕЧНАЯ ЭНЕРГИЯ
AEL-PHVGC
Применение фотоэлектрических электростанций, управляемых с компьютера (ПК)
The Photovoltaic Power Plants Application, with SCADA, ''AEL-PHVGC'', has been designed to study the operations carried out in photovoltaic power systems connected to the energy national grid. This application allows to study the procedure of...
ДОПОЛНИТЕЛЬНОЕ ОБОРУДОВАНИЕ
5.3.1.- ФОТОЭЛЕКТРИЧЕСКАЯ СОЛНЕЧНАЯ ЭНЕРГИЯ
AEL-PHVGC
Применение фотоэлектрических электростанций, управляемых с компьютера (ПК)
The Photovoltaic Power Plants Application, with SCADA, ''AEL-PHVGC'', has been designed to study the operations carried out in photovoltaic power systems connected to the energy national grid. This application allows to study the procedure of...
5.3.1.- ФОТОЭЛЕКТРИЧЕСКАЯ СОЛНЕЧНАЯ ЭНЕРГИЯ
AEL-PHVG
Применение фотоэлектрических систем с подключением к сети
The Photovoltaic Application with Connection to Grid, "AEL-PHVG", has been designed by EDIBON to study the energy production by photovoltaic panels and how this energy is injected to the grid.In order to learn about solar energy production, the...
5.3.1.- ФОТОЭЛЕКТРИЧЕСКАЯ СОЛНЕЧНАЯ ЭНЕРГИЯ
AEL-SAPV
Изолированное фотоэлектрическое приложение сети
The Stand-Alone Photovoltaic Application, "AEL-SAPV", has been designed by EDIBON to study the energy production obtained with photovoltaic panels.This application will provide the user with the knowledge and the essential skills about the...
5.3.3.- ВЕТРЯНАЯ ЭНЕРГИЯ
SWPC
Приложение для Насосов в Отдельных Сетях, Управляемое компьютером (ПК)
The Computer Controlled Single Water Pumping Application, "SWPC", has been designed by Edibon to show the user the basic principles of operation of pumping equipment in isolated networks, exposing in a didactic way the elements involved in the...
5.3.3.- ВЕТРЯНАЯ ЭНЕРГИЯ
SWP
Stand-alone Water Pumping Application
The Water Pumping Application, "SWP", has been designed by Edibon to show the user the basic principles of operation of pumping equipment in isolated networks, exposing in a didactic way the elements involved in the process of generation and...
5.3.1.- ФОТОЭЛЕКТРИЧЕСКАЯ СОЛНЕЧНАЯ ЭНЕРГИЯ
EESFC
Устройство фотогальванической солнечной энергии, управляемое ПК
The Computer Controlled Photovoltaic Solar Energy Unit, "EESFC", includes equipment that uses the photo-conversion law for the direct conversion of solar radiation into electricity. The absorbed energy is provided by simulated solar radiation,...
5.3.1.- ФОТОЭЛЕКТРИЧЕСКАЯ СОЛНЕЧНАЯ ЭНЕРГИЯ
EESFB
Основное устройство фотогальванической солнечной энергии
The sun provides a wide spectrum of solar power. With the exception of the light we see around us every day, the rest of the solar power is invisible. Other parts of the spectrum consist of cosmic beams, gamma rays, x-rays, ultraviolet light,...
5.3.1.- ФОТОЭЛЕКТРИЧЕСКАЯ СОЛНЕЧНАЯ ЭНЕРГИЯ
MINI-EESF
Модульное оборудование для солнечной фотовольтаической энергии (Полная версия)
Photovoltaic Solar Energy Modular Unit (Complete Version), "MINI-EESF", is a laboratory scaled unit designed to study all the parameters involved in the solar radiation direct conversion into electricity. The unit is based on some application...
5.3.1.- ФОТОЭЛЕКТРИЧЕСКАЯ СОЛНЕЧНАЯ ЭНЕРГИЯ
MINI-EESF/M
Модульное устройство фотоэлектрической солнечной энергии (Промежуточная версия)
Photovoltaic Solar Energy Modular Unit (Intermediate Version), "MINI-EESF/M", is a laboratory scaled unit designed to study all the parameters involved in the solar radiation direct conversion into electricity.The unit is based on some application...
5.3.1.- ФОТОЭЛЕКТРИЧЕСКАЯ СОЛНЕЧНАЯ ЭНЕРГИЯ
MINI-EESF/B
Модульное устройство фотоэлектрической солнечной энергии (Базовая версия)
The Photovoltaic Solar Energy Modular Unit (Basic Version), "MINI-EESF/B", is a laboratory scaled unit designed to study all the parameters involved in the solar radiation direct conversion into electricity.The unit is based on some application...